waiting on for pics on non widebody.
B@t™
kinda would look like this imo on a non widebody until we get actual pics
-
***AVOID MARKETPLACE SCAMS!!***
Scammers are using compromised Prime member accounts to pose as a trusted seller in the marketplace. Before you enter into a deal with any seller, follow these tips to keep yourself safe. If you encounter one of these scammers, please report them immediately and we will lock their account.
Caveat Emptor!
Carbon 6: Super GT Mirror
- Thread starter Jeff@Carbon6
- Start date
kinda would look like this imo on a non widebody until we get actual pics
Final assembly on the first 2 pair today.
Here are some pictures. Clear topcoat on left, smoked on right. (Housings still need to be buffed out)
I will get some pictures on a non-widebody soon...
Here are some pictures. Clear topcoat on left, smoked on right. (Housings still need to be buffed out)
I will get some pictures on a non-widebody soon...
Wow, looks great!
As the first sets have been shipped, I'd like to update installation information.
please refer to page(s) 20-6 and 23-252 in the online service manual for door panel removal and mirror removal.
http://www.nsxprime.com/FAQ/Reference/1991_svcman/1991servman.pdf
Do not attempt to remove any or part of the oem mirror from the outside. The entire mirror assembly is removed by 2 nuts on the inside of the door (see page 23-252 in service manual) and the new mirror installs in the reverse. It is helpful to have an extra pair of hands to hold the mirror while you are loosening the nuts from the inside of the door and also when re-installing.
You will need to swap the metal harness bracket from the OEM plug to the new mirrors. There is a small release clip on the plug that lets you slide it out. Sense the new mirror harness uses the same plug, it will reinstall the same way it was removed. This bracket is important to keep the wires out of the door windows way.
DO NOT OVER TIGHTEN THE NUTS when replacing them on the new mirrors. The spec is ~7 foot pounds. Because the new mirrors are composite (carbon fiber) it will damage the housing if they are to tight.
If you have any questions or concerns, please contact me directly.
Synth19 is going to get some pictures of his on his car (non-widebody). I did not have a "donor" car handy to take any pictures myself.
Starting second group today.
please refer to page(s) 20-6 and 23-252 in the online service manual for door panel removal and mirror removal.
http://www.nsxprime.com/FAQ/Reference/1991_svcman/1991servman.pdf
Do not attempt to remove any or part of the oem mirror from the outside. The entire mirror assembly is removed by 2 nuts on the inside of the door (see page 23-252 in service manual) and the new mirror installs in the reverse. It is helpful to have an extra pair of hands to hold the mirror while you are loosening the nuts from the inside of the door and also when re-installing.
You will need to swap the metal harness bracket from the OEM plug to the new mirrors. There is a small release clip on the plug that lets you slide it out. Sense the new mirror harness uses the same plug, it will reinstall the same way it was removed. This bracket is important to keep the wires out of the door windows way.
DO NOT OVER TIGHTEN THE NUTS when replacing them on the new mirrors. The spec is ~7 foot pounds. Because the new mirrors are composite (carbon fiber) it will damage the housing if they are to tight.
If you have any questions or concerns, please contact me directly.
Synth19 is going to get some pictures of his on his car (non-widebody). I did not have a "donor" car handy to take any pictures myself.
Starting second group today.
- Joined
- 30 July 2005
- Messages
- 2,219
:smile:
B@t
B@t
I LOVE, and I mean LOVE these mirrors. I wasn't 100% sure if I would like them.. but after they went on...... 
Here is a quick and dirty shot, sorry for the bad photo
NSX on Advan Model 5's by synth19, on Flickr
Carbon 6: Super GT Mirror by synth19, on Flickr
Here is a quick and dirty shot, sorry for the bad photoNSX on Advan Model 5's by synth19, on Flickr
Carbon 6: Super GT Mirror by synth19, on Flickr
Ok G, when the ¥u€k do I get a ride!? Looks BAD ASS.
Wow Synth..... the profile in your picture really shows how nice it looks. Damn, I just can't justify the 2K pricetag :frown:
Regardless of the price, I think all are spoken for.
Sent from my SPH-D700 using Tapatalk
Sent from my SPH-D700 using Tapatalk
Lucky guys, those things are awesome!
The mirrors and your car look absolutely fantastic. IMHO a black roof would tie the mirrors and wing together for a more unified look, which would be incredible. But I'm sort of stuck in the '90s.:smile:
I LOVE, and I mean LOVE these mirrors. I wasn't 100% sure if I would like them.. but after they went on......
NSX on Advan Model 5's by synth19, on Flickr
Carbon 6: Super GT Mirror by synth19, on Flickr
Absolutely gorgeous mirrors. Congrats to those that got them.
I LOVE, and I mean LOVE these mirrors. I wasn't 100% sure if I would like them.. but after they went on......
NSX on Advan Model 5's by synth19, on Flickr
Absolutely stunning looking NSX, I also think the black roof would complete the look
I was thinking the same when I saw these mirrors. I would think it would look right on a white NSX and black roof! Waiting on 8!:biggrin:
WoW! Those look fantastic! Jeff your execution is flawless.
I don't necessarily think you need a black roof to pull these off. I considered it prior to installation, but happy with how things look. The base is already black, not to mention the tie-in to the spoiler and front lip.
Sent from my SPH-D700 using Tapatalk
Sent from my SPH-D700 using Tapatalk
Your car looks fantastic before these mirrors anyways! :biggrin:
Does compliment the rear wing. imo. Thanks for the picture post!
What finish is yours synth? Looks black also are the wheels 17/18 and lastly how you like the new front lip :smile:
The are the "smoked" CF. The lighting makes them look black, but they are a dead-on match with the downforce CF smoked spoiler. The CF weave is damn impressive in person. Major props to Jeff!
Wheels are 17/18...
Lip, diggin it!
- Joined
- 19 March 2003
- Messages
- 3,442
G,
Looks awesome, can you get a front profile shot of this with the whole car, I am trying to gauge the length of the housing. The car looks great, someone should photoshop the roof black just to see how it looks. Is a possible vinyl wrap a possibility?
Looks awesome, can you get a front profile shot of this with the whole car, I am trying to gauge the length of the housing. The car looks great, someone should photoshop the roof black just to see how it looks. Is a possible vinyl wrap a possibility?
