- Joined
- 19 March 2003
- Messages
- 3,442
White then Gold Metalizer. Over black it does not look good.
-
***AVOID MARKETPLACE SCAMS!!***
Scammers are using compromised Prime member accounts to pose as a trusted seller in the marketplace. Before you enter into a deal with any seller, follow these tips to keep yourself safe. If you encounter one of these scammers, please report them immediately and we will lock their account.
Caveat Emptor!
Plasti-dip Questions and answers
- Thread starter SOURCE 1
- Start date
White then Gold Metalizer. Over black it does not look good.
I've searched all over for pics of how this looks but can only find gold over black base. Do you have any pics of what gold over white base looks like?
We finally got the matte white S2000 finished. Here are some pics as promised.
Hey everyone, I figured I would start a thread where all the Q&A on the plasti-dip could be in one spot.. I think we have 2 or 3 threads going about this now in different sections.
I will try to answer whatever questions you have on the products. We have dipped 3-4 vehicles and motorcycles and countless parts. I am getting a lot of PM's regarding it too which is great. I am sure some people have the same questions so I figured this is a better avenue to discuss. I'll check the thread as often as possible and update. I'm on here pretty frequently
Brian
Hi Brian,
I asked my buddy boris to give you a call...
He wants to plastidip his whole car so I am sure you guys can work something out...
Jeff
Not sure if this was asked (tried searching through the posts but didn't see it) but does anyone know if this will work/stick to the rubber trim around the rear glass hatch? Mine is fading and has white spots now, and was told it is expensive/a bitch to replace..maybe this would be an easier and cheaper solution?
I sprayed it on the wide body NSX. It will work. BUT what I found is when you go to open the glass if your fingers pull on that rubber piece it will peel the dip. So you have to be very careful!
Id make sure its Ispropyl and not just rubbing alchol that has acetone
I just read through every post and no one has mentioned using this project on interior pieces such as a center console or the switch plates in the doors.
Anyone try this? How durable?
Thanks in advance
Anyone try this? How durable?
Thanks in advance
I have not tried this yet. But knowing the texture I think as long as you put glossifier on it after you spray it it may be just fine.
I plastidipped my center console on my legend about 2 years ago after I ruined it with a carbon fiber project. The Plastidip has held up perfectly after this long. I think I sprayed about 3 or 4 coats on it. It looks and feels similar to the vinyl Acura used to make the dash and lower center console/armrest.
Yes, We carry pretty much all of it except the newest colors. I have a couple cans of smoke in stock.
- Joined
- 19 March 2003
- Messages
- 3,442
What do I want for taillights? Smoke? Or clear? Just want a slightly darker red, nothing too drastic.
Smoke really adds a brushed look more than dark. I'll try to find a pic on my phone of how it turns out. But if you have Facebook look at Source 1 automotive Facebook page and there are pics in the albums. If I don't have a pic in my phone I'll post one tomorrow.
We are already facebook friends. Ill check.
For reference here they are:
It is a very matte finish and takes a lot to give it a tint.
Can you apply the glossifier over the smoke? I think when you apply that spray tint or the vinyl tint the result is more shiny.
I'm wondering if the combination of smoke and glossifier gets closer to the tinted look.
I'm wondering if the combination of smoke and glossifier gets closer to the tinted look.
Quite possibly. I did not try it but I would expect that to be the case.
I tried the smoke on the front lenses I have and it came out like this. I think I used too much dip. I'm not really liking the look and will peel it off.
How many coats are on the rear lenses in the pic above?
There are about 5 coats on those.
Is there any whay to make a spray on Gold? can you use Gold metalizer strait on wheels?
Wow I guess this was already asked
Wow I guess this was already asked
Last edited:
For the people that plastidip their wheels... Have you noticed any problems with wheel vibration? I would think that if you don't spray evenly you will have a weight imbalance?
It's not thick or heavy enough to throw off balance. People paint wheels all the time without wheel vibration or balance issues. I did my RS4 wheels and they are smooth as butter right up to the point the ECU steps in:biggrin:
I got some white dip and gold metallizer since I wanted to see how it would look. 1st pic is of the oem wheel, 2nd pic is with the white dip and 3rd pic is with the gold metallizer over the white dip.
The gold metallizer is really just a highlight and it took almost a whole can to get that final gold color. I didn't really like the look but at least I know now.
The gold metallizer is really just a highlight and it took almost a whole can to get that final gold color. I didn't really like the look but at least I know now.
