Gauge cluster rebuild?

[Heineken]

BTW, where's the Calibrator that was shipped in your general direction, @Honcho

 

[Honcho]

@NSX_n00b has it!

 

[drew]

One can always take the $2 route for calibration

 

[warrenw]

plus 1 for briank. He did mine. turnaround was very quick.

 

[18000rpm]

Not to denegrate Brian K's fine work as i was not aware he was doing them, so i recently had MITA of Japan rebuild my unit. It is done by Honda techs and they have a test module to test every function. This "tester" was a Honda tool part at one time so perhaps Brian has one or made his own. Mita turned it around in about a week. Nothing was wrong with my cluster by the way, i had a non-cluster wiring issue.

Hi TANTO, does Mita replace all the caps as part of the service? https://www.mitamotorsports.com/product/gauge-cluster-overhaul

And for those wondering this is Mita's gauge tester:

 

[Honcho]

Hi TANTO, does Mita replace all the caps as part of the service? https://www.mitamotorsports.com/product/gauge-cluster-overhaul

And for those wondering this is Mita's gauge tester:

View attachment 198475

I believe MITA sends theirs to T3, but Marc can tell you for sure.

 

[no_altezzas]

I recently had this service done and can confirm the overhaul was completed by T3. All bulbs and capacitors were replaced and were even shipped back to me along with the cluster. I also noticed that Mita had increased the cost of this service so keep in mind you will need to cover shipping and import fees both ways