-
***AVOID MARKETPLACE SCAMS!!***
Scammers are using compromised Prime member accounts to pose as a trusted seller in the marketplace. Before you enter into a deal with any seller, follow these tips to keep yourself safe. If you encounter one of these scammers, please report them immediately and we will lock their account.
Caveat Emptor!
AP-X NSX turbo system (angus turbo kit)
- Thread starter angus
- Start date
Re: DIY Turbo kit !
Wil, and Doc Tai. Thanks for the info. Frank
Wil, and Doc Tai. Thanks for the info. Frank
Re: DIY Turbo kit !
Wil, sounds good. Frank
Wil, sounds good. Frank
Re: DIY Turbo kit !
You go Wil!
Don't try, just do it.
Trev
Not sure if I will install my 440cc injectors and Fic before Kelowna, or the Nav DVD either.
Kind of lazy here, like to sit and look at the chopper in the garage instead. lol
I did put on the Prospeed catz and GTLW Tailtec, but will probably sell the GTLW.
Can't wait to see ya.
You go Wil!
Don't try, just do it.
Trev
Not sure if I will install my 440cc injectors and Fic before Kelowna, or the Nav DVD either.
Kind of lazy here, like to sit and look at the chopper in the garage instead. lol
I did put on the Prospeed catz and GTLW Tailtec, but will probably sell the GTLW.
Can't wait to see ya.
Last edited:
Re: DIY Turbo kit !
That is very low!!!:biggrin:
Can u mount the heat exchanger any higher?
Bryan
That is very low!!!:biggrin:
Can u mount the heat exchanger any higher?
Bryan
Last edited:
Re: DIY Turbo kit !
Wow doc , that does look low , you will need to be careful on speed bumps , I was thinking that with a bit of customization on the end tanks , it could be mounted up top by the throttle body , PM me and we can talk.
Wow doc , that does look low , you will need to be careful on speed bumps , I was thinking that with a bit of customization on the end tanks , it could be mounted up top by the throttle body , PM me and we can talk.
Re: DIY Turbo kit !
Im glad my intercooler is going in the engine bay, that does look pretty low. Glad to see that one of the kits are completed. Just recieved my FIC yesterday. Frank
Im glad my intercooler is going in the engine bay, that does look pretty low. Glad to see that one of the kits are completed. Just recieved my FIC yesterday. Frank
Re: DIY Turbo kit !
I just got my modified oil pan in over the weekend (its a major job - but I call it therapy) AEM FIC is installed, with fuel injectors and regapped plugs-
Oil pump and meth pump going in tonight
and then I will bolt up the turbo.
Rich
I just got my modified oil pan in over the weekend (its a major job - but I call it therapy) AEM FIC is installed, with fuel injectors and regapped plugs-
Oil pump and meth pump going in tonight
and then I will bolt up the turbo.
Rich
Re: DIY Turbo kit !
It has come to my attention , that there is some question about wether my kit is really a "complete" kit , so for those who prefer it ,
I am offering a 100% COMPLETE KIT , this consists of :
- Tuner kit
- AEM F/IC
- 440cc injectors
- Air to air intercooler setup
- Tial BOV ( this will also include the bov flange welded on )
$6700
It has come to my attention , that there is some question about wether my kit is really a "complete" kit , so for those who prefer it ,
I am offering a 100% COMPLETE KIT , this consists of :
- Tuner kit
- AEM F/IC
- 440cc injectors
- Air to air intercooler setup
- Tial BOV ( this will also include the bov flange welded on )
$6700
- Joined
- 5 April 2005
- Messages
- 220
Re: DIY Turbo kit !
Thank you Devin , it really is a great deal , and I am hoping a few more will jump on this deal while it lasts!
Thank you Devin , it really is a great deal , and I am hoping a few more will jump on this deal while it lasts!
Re: DIY Turbo kit !
Hey Angus, I cant say enough about your customer support. I am going to check out a NSX in a week or two. Need to have one in the garage again. I will be ordering your kit asap once I find the right X. How far are you from Nor Cal? Just curious. :biggrin: Have a good one.
Will
P.S. I just noticed in your sig, you said you had a B2200 w/a V8 SC. R u serious. Man back in the day I had a B2200 all shaved up low as it should be, was ready to drop in a 13b but someone offered the right amount so I sold it. Yours must of been a beast. Sorry of topic, it just caught my attention.
Hey Angus, I cant say enough about your customer support. I am going to check out a NSX in a week or two. Need to have one in the garage again. I will be ordering your kit asap once I find the right X. How far are you from Nor Cal? Just curious. :biggrin: Have a good one.
Will
P.S. I just noticed in your sig, you said you had a B2200 w/a V8 SC. R u serious. Man back in the day I had a B2200 all shaved up low as it should be, was ready to drop in a 13b but someone offered the right amount so I sold it. Yours must of been a beast. Sorry of topic, it just caught my attention.
Last edited:
Re: DIY Turbo kit !
Angus is the Bomb, He is installing my Double Din Nav unit and 440cc injectors and FIC on the side of the Road in Kelowna on the May long weekend.
He said he doesn't even use a computer to tune it, he'll use his old slide rule, well maybe the old Texas TI-88 he wears on his hip as well. I've seen him cheat.
Trev
Angus is the Bomb, He is installing my Double Din Nav unit and 440cc injectors and FIC on the side of the Road in Kelowna on the May long weekend.
He said he doesn't even use a computer to tune it, he'll use his old slide rule, well maybe the old Texas TI-88 he wears on his hip as well. I've seen him cheat.
Trev
Re: DIY Turbo kit !
I am wondering about the demand for a y- pipe that fits the 91-94 headers , to date I have only made them for the 95-99 and 00-05 headers since they use the much more reliable ball flanges . I would normally suggest an upgrade to the newer style headers , be it oem (used) or aftermarket , but in light of some recent inquies , I would like to see a show of hands on this topic , I MAY look into producing a y-pipe for these headers if the demand exists.
Thanks people
Wil
I am wondering about the demand for a y- pipe that fits the 91-94 headers , to date I have only made them for the 95-99 and 00-05 headers since they use the much more reliable ball flanges . I would normally suggest an upgrade to the newer style headers , be it oem (used) or aftermarket , but in light of some recent inquies , I would like to see a show of hands on this topic , I MAY look into producing a y-pipe for these headers if the demand exists.
Thanks people
Wil
Re: DIY Turbo kit !
YES!
I am doing all the install work myself in my garage at home. I did get some help for the belt change as there are many tricks to do this that are not in the manual.
I have posted a few pictures and will start a thread next week about the full install- with detailed pictures. I have been taking my time and had a little down time because of FED EX loosing a box- they managed to salvage an exhaust pipe but Wil ended up having to make me another Meth tank!- BTW Wil took care of the lost box without question.
I have installed a couple of superchargers in my time and have a good set of tools- but I am a corporate lawyer by profession and far from a professional mechanic. The only part of this project that is not DIY is the final tuning of the computer- although its pretty easy to get it running.
I will be traveling this weekend but should almost be done with the install next week- I will start the thread when I get back.
Wil is a ready resource and gets back to me incredible fast- by phone or email with tips to make the install smoother.
I imagine that by following my install (and a couple of the other guys out there) it will be real easy to follow our footsteps - just takes a little patience.
Rich
Rich
YES!
I am doing all the install work myself in my garage at home. I did get some help for the belt change as there are many tricks to do this that are not in the manual.
I have posted a few pictures and will start a thread next week about the full install- with detailed pictures. I have been taking my time and had a little down time because of FED EX loosing a box- they managed to salvage an exhaust pipe but Wil ended up having to make me another Meth tank!- BTW Wil took care of the lost box without question.
I have installed a couple of superchargers in my time and have a good set of tools- but I am a corporate lawyer by profession and far from a professional mechanic. The only part of this project that is not DIY is the final tuning of the computer- although its pretty easy to get it running.
I will be traveling this weekend but should almost be done with the install next week- I will start the thread when I get back.
Wil is a ready resource and gets back to me incredible fast- by phone or email with tips to make the install smoother.
I imagine that by following my install (and a couple of the other guys out there) it will be real easy to follow our footsteps - just takes a little patience.
Rich
Rich
Re: DIY Turbo kit !
ko-nsx, It's very easy to install will's turbo kit if you know how turbo system work. It should take about two days to install everything unless your car is 91-96 then it'll take a little bit longer cause to need to swap out the header. I'm in san antonio if you need help on the install or wanna check out his turbo kit, let me know
ko-nsx, It's very easy to install will's turbo kit if you know how turbo system work. It should take about two days to install everything unless your car is 91-96 then it'll take a little bit longer cause to need to swap out the header. I'm in san antonio if you need help on the install or wanna check out his turbo kit, let me know
Re: DIY Turbo kit !
I would like to add that I can weld the newer style ball flanges on to your oem 91-94 exhaust manifolds , this I can do for NO CHARGE with purchase of a kit , OR , I can simply supply the flanges and you can have them welded on .
I would like to add that I can weld the newer style ball flanges on to your oem 91-94 exhaust manifolds , this I can do for NO CHARGE with purchase of a kit , OR , I can simply supply the flanges and you can have them welded on .
