ABS/ALB modulator rebuild write up

[warrenw]

Thanks to Warren for rebuilt kit shipped to Italy :smile:

Luca, Great to hear you were able to get your ABS working as new.
A few people bought o-ring kits at NSXPO2013.
All my o-rings have been built into kits.
I have 15 kits left. After that there will be no more.
http://www3.telus.net/public/warshan...rebuld_v06.pdf

 

[warrenw]

for 1991 and 1992 cars only:
I have 3 kits left.
After that, I will need a list of a min of 10 requests (list) in order to consider buying more parts to build more kits.



for 1993-1999 cars only:
I am noticing more and more requests for myself or someone else to create a kit for the 1993-1999 modulator as they are starting to fail now as well on a regular basis.

I may consider rebuilding a 93-99 modulator and creating a kit, if someone has one to spare. Shipping will be an expensive endeavor, but there are more ABS systems out there that may be able to be saved.

 

[nsxnemo]

Just wanted to thank Warren for everything and everyone else in this thread who posted their experiences.

Honestly, I don't think the vent on the reservoir cap is the culprit but more so underneath the plastic housing on the solenoid side. This part is not completely sealed from the bottom and there's quite a bit of gap on the key openings. Taking a look at everyone else's pictures this is where all the bugs and debris are. I can just imagine it being a cave for bugs! Come to think of it, I may go back and seal the bottom of the plastic housing with some electric tape, but I'm not sure if the reason for this design is to allow the solenoids to breathe.

 

[comquat1]

If I get this done by my dealer how many hours should I expect to be billed? I'd love to tinker with this on my own but it's just boiling down to a time constraint in life at this point. Too many things going on.

 

[Briank]

Georg, good to hear, yet another NSX ABS system is back on the road.

FYI to everyone else. I have about 25 kits left. When they are gone, I won't be making any more. 91 and 92 ABS cars only.

I would like to get a kit what is your paypal and price?

 

[warrenw]

All kits are now either sold or spoken for.

Great project. I estimate between 30 and 50 ABS modulator have been rebuilt. (Some people are yet to use their kit) I only know of 2 that could not be saved.
Solenoids are the next big issue in these modulator. They can be exercised with brake fluid pressurizing the unit. (this is if you have a stuck or leaking solenoid (not many have this issue, but these units are getting old))

In order for this to continue, I will need at least 10 people to commit to a list below at a price of $57.00 (postage has gone up)

'91 and '92 cars only:
1.)
2.)
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
...

 

[IMS_NA1]

'91 and '92 cars only:
1.)IMS_NA1
2.)
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
...

 

[warrenw]

'91 and '92 cars only:
1.)IMS_NA1
2.)acortez
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
...
​

 

[jagtiger]

'91 and '92 cars only:
1.)IMS_NA1
2.)acortez
3.)jagtiger
4.)
5.)
6.)
7.)
8.)
9.)
10.)
...

 

[Kid]

Noob sorry; do you have any kits for a 93 one? I saw your guide but can't quite fathom how to get the o-rings from the Daemar site?
I saw the part numbers in your (fantastic) guide - do I just email these to Daemar themselves?

 

[warrenw]

My write up is for 91 and 92 cars only. The modulator changed in 93. Better but has similar issues.

 

[Kid]

Right, thanks for that.
Guess only way to know is pull it out and apart then source rings that way?

 

[amengineering]

'91 and '92 cars only:
1.)IMS_NA1
2.)acortez
3.)jagtiger
4.)amengineering
5.)
6.)
7.)
8.)
9.)
10.)
...

 

[M-P]

I'm in...

'91 and '92 cars only:
1.)IMS_NA1
2.)acortez
3.)jagtiger
4.)amengineering
5.)M-P
6.)
7.)
8.)
9.)
10.)

 

[darock]

I'm in as well

'91 and '92 cars only:
1.)IMS_NA1
2.)acortez
3.)jagtiger
4.)amengineering
5.)M-P
6.) darock
7.)
8.)
9.)
10.)

 

[Velocitized]

I'll take a kit.

'91 and '92 cars only:
1.)IMS_NA1
2.)acortez
3.)jagtiger
4.)amengineering
5.)M-P
6.) darock
7.) Velocitized
8.)
9.)
10.)

Thanks Warren!

 

[Knukle Head]

1.)IMS_NA1
2.)acortez
3.)jagtiger
4.)amengineering
5.)M-P
6.) darock
7.) Velocitized
8.)Knukle head
9.)
10.)

 

[Racer NSX]

1.)IMS_NA1
2.)acortez
3.)jagtiger
4.)amengineering
5.)M-P
6.) darock
7.) Velocitized
8.)Knukle head
9.) Racer NSX
10.)

 

[Wilding]

1.)IMS_NA1
2.)acortez
3.)jagtiger
4.)amengineering
5.)M-P
6.) darock
7.) Velocitized
8.)Knukle head
9.) Racer NSX
10.)Wilding

 

[warrenw]

Well that didn't take long!

I ordered o-rings from Daemar Inc.
They quoted me two weeks for delivery/pickup.

I will update this thread when o-ring kits are available again.

 

[Velocitized]

Thanks Warren,

When should we submit payment?

 

[warrenw]

Thanks Warren,

When should we submit payment?

Please wait until I have kits. I will notify here on this thread

 

[Knukle Head]

I'm excited too.. my hand is hovering over the pay now button like I was on "Press your luck"



(Yes I did just alienate 90% of the people on this forum) ::snicker::

 

[Kitaka]

Any relief for '93 owners? I'm ready to do it!

 

[warrenw]

Any relief for '93 owners? I'm ready to do it!

If someone can ID all the o-rings for size, diameter and circumference, I am sure I an source the o-rings.