Search results

I have this fiberglass console for sale. It fits very well and easy to mod since it's fiberglass http://www.nsxprime.com/forums/showthread.php?t=115950&highlight=console I have the same console in my car painted here: http://www.nsxprime.com/forums/showthread.php?t=119368&highlight=valentine...

sold! Please lock thread. Thx prime!

No problem. I had Sam @ Downforce do it. See post #46 here for some tips: http://www.nsxprime.com/forums/showthread.php?t=133650&page=2 Jeff

I've owned both and have to say black roof is the way to go. I have zero regrets. Here's an older pic. I will have updated pics soon Jeff

Re: STMPO's NSX Front Strut Tower bar...NA1 & NA2 working windshield wiper applicatio I looked at it but have not tested it yet. It looks like you can only extend it 1". I can't see it going further than that. In Cali, it's not a big deal to have just one wiper with Rain-X. Jeff

Re: STMPO's NSX Front Strut Tower bar...NA1 & NA2 working windshield wiper applicatio I put together a DIY. I am tired so forgive me if I missed a step(s). I didn't get pics of the lower windshield sash removal but will try to illustrate how to do it. Will edit it as Ross sees fit. 1)...

Re: STMPO's NSX Front Strut Tower bar...NA1 & NA2 working windshield wiper applicatio I just installed STMPO's FSTB. I went for a test drive and have to say it makes a HUGE difference in stiffening up the NSX. Car is now very predictable...couldn't believe the difference. The bar is well...

Why is the section above the lenses and the outside (where amber is) not painted as well? If you have done this, do you have any pics? Thx Jeff

Hardly used. In EXCELLENT condition. NO dents/scratches. Includes cap in pic. Sold! First $180+$15 ship within 48 states takes it or local p/u Anaheim, CA. PM me for fastest response.

I can vouch for Chris. Everything is plug n play. The LED harnesses have bulb sockets that plug right into the OEM harness. Also, you still plug the harness back into the OEM housing too so everything is sealed up again. No risk of moisture, junk contaminating the internals of the...

Re: STMPO's NSX Front Strut Tower bar...NA1 & NA2 working windshield wiper applicatio I have made my donation last week :biggrin: Can't wait to install them. Jeff

Trying to remove the sash along the bottom of the windshield...one on the OUTSIDE of windshield. I've done a search and haven't had any clear answers. I see the yellow "clips" that people are referring to but with the limited space, how does it disengage? I've read to move it toward the front...

RSO 34...I am interested. You have PM. Thx Jeff

SOLD!! Price Reduced $280 + $20 ship within 48 states or local p/u Anaheim, CA. Will ship internationally for additional $$. Been receiving PMs re why I am selling. I went with a custom 2.3L supercharger w/ intercooler...everything sits higher so this didn't fit so well. Otherwise, it works...

Re: STMPO's NSX Front Strut Tower bar...NA1 & NA2 working windshield wiper applicatio Ross, offer it as the "Viagra" package!! :biggrin:

I just finished installing my new GTC LED setup from Chris on my 02 tails. Thought I would give some tips and my impression (Forgive me if this info is redundant as I have not read ALL of the many posts). Have to say, I was VERY impressed with the quality of the soldering/circuit board cut out...

I have the triple disk...see post #13 for my review here: http://www.nsxprime.com/forums/showthread.php?t=113144&highlight=carbonetic I have NO regrets. However, if you are annoyed by a little rattle of the lightweight flywheel, then this is not for you. For me, the trade off is worth...

If you are "a little bored with the wheels", I would certainly look for something else since it plays such a major part of the look. IMO, you will get more $$ for it the way it is anyway. As you know, you are going down a slippery slope $$ wise. :tongue: Jeff

Looking great Brent. Reminds me of what I did..bought a heavily modded NSX (widebody, SC'd, Brembo's, susp. etc) and redid EVERYTHING to my taste/quality. I am STILL not done! :eek: I would ditch the wheels depending on weight. If they are lightweight...keep them but powder coat it black...

Call Eric to have him pre order the tires. Tell him Jeff w/ the NSX and Maliburapper sent ya'. His contact info if you need it is at supremepowerparts.com He's a late bird by shop standards...doesn't usually get in til after 10 am. Good luck. Jeff

I concur. I've known Eric for 10 or so years. His mounting machine is touchlless. No bar whipping around your rim for leverage. His $$ are very fair. Maybe you can take the wheels to him when shane has them off the car for the coilover install. Jeff

I don't know personally. Maybe you can email Alpine to confirm. Jeff

Thanks for offering your tech services. I am no formal tech guy myself but have setup my own secure wi-fi, re installed my OS, registry fixes, and free antivirus'/spyware etc. This just gives you a little background of what I know..by no means an expert at any of these. Anyway, I currently...

My item sold :biggrin: But, as a heads up I still see similar ads in the NSX Parts for sale section. Just want to set the record straight for future posters. http://www.nsxprime.com/forums/showthread.php?t=126922 Thanks again for working so hard on Prime. Jeff

It actually has the same MSRP as the outgoing W505...$1100. Of course, that is the MSRP and not the true market $$. I believe they made the NAV standard to stay competitive esp. with the cost of NAVs dropping. Jeff