New NSX wide body kit by BRS Tuning

[Ojas]

The comptech widebody kit (Also fibreglass) adds almost 300 lbs so I was just wondering.

It’s heavier, but not 300 lbs. heavier. The FAQ mentions 65 lbs. more than stock. The weight mentioned in this post more or less agrees with the 65 lbs. figure.

The wide body kit is actually lighter than the stock aluminum body panels. I do not know the exact weight that you will be saving if you have this kit installed but it will be lighter.

The aluminum panels that would be replaced are the front and rear quarter panels, which weigh under 5 and 8 lbs. each, respectively. You are saying the panels in this kit weigh less?

 

[Juice]

Sorry, but I find that impossible. Unless dry CF is used it will always be heavier than Al. HLFRF is the strongest, yet heaviest medium for aftermarket body panels. I'm betting this car is still a good 50lb heavier than stock. That isn't stopping me from getting it however.

 

[peter]

It’s heavier, but not 300 lbs. heavier. The FAQ mentions 65 lbs. more than stock. The weight mentioned in this post more or less agrees with the 65 lbs. figure.

Sorry, my mistake. I looked around after and found that the Comptech NSX weighed in at 3185 lbs...but that's including all the other add-ons as well.

 

[IAtuner]

It's actually lighter? The comptech widebody kit (Also fibreglass) adds almost 300 lbs so I was just wondering.

Peter,

This is what I was told from BRS Tuning. I will ask if BRS can tell me the exact weight difference and I will post it asap.

IA

 

[satan_srv]

I'd like to see it on a car with a regular paint job and no stickers...it's tough to see all the lines.

 

[gheba_nsx]

Is this really the same kit that was pictured here?

http://www.brs-autodesign.com/images/Projects/NSX/DSCF1492.JPG

The rear looked better in the prototype... more roundish...

 

[IAtuner]

BRS Tuning is going to have the exact weight difference for the wide body kit and the stock panels by Thursday-Friday. Any other questions please let me know.

Thank you,

IA

 

[IAtuner]

Is this really the same kit that was pictured here?

http://www.brs-autodesign.com/images/Projects/NSX/DSCF1492.JPG

The rear looked better in the prototype... more roundish...

Gheba_NSX,

Yes this is the same NSX that is shown.

 

[IAtuner]

I'd like to see it on a car with a regular paint job and no stickers...it's tough to see all the lines.

Satan_SRV,

I should have this full kit on my car soon and I'll post up pictures of it.

IA

 

[IAtuner]

PICTURES OF BRS WIDE BODY KIT ON 91-01 NSX.

http://www.nsxprime.com/photopost/showgallery.php?cat=500&page=2&sort=1&perpage=12&ppuser=7581&=

MY NSX SHOULD BE DONE BY FEB. I WILL POST MORE PICTURES UP SOON. FOR ANYONE WHO IS INTERESTED IN THIS BODY KIT FOR THE 91-01 NSX OR 02-UP MODEL PLEASE LET ME KNOW.

MSRP: $4500

I WILL OFFER A BETTER PRICE FOR WHOEVER WANTS TO PURCHASE THIS KIT.

 

[NsX_R]

Is the kit includes all the brakets (Plug&Play) ?
Any pics of the rear diffusor ?
Installation inhouse or you can ship out ?

 

[PoohBEAR]

Son,
Something doesn't look right. I like the widebody type....but this one is kind of odd. More like a boat...I don't know. I don't have a real word for it....but I am seeing something odd about this that I can't describe. It just doesn't flow with the rest of the line. Anywho, it is only my thought.

 

[Juice]

Son, I've tried geting ahold of you. Check you PM's.

 

[IAtuner]

Is the kit includes all the brakets (Plug&Play) ?
Any pics of the rear diffusor ?
Installation inhouse or you can ship out ?

yes if you go to my picture gallery you can see the rear diffuser on the candy orange nsx. this kit does not include brackets or any other type of bolts this kit uses the original bolts from the nsx. yes; this kit can be shipped out no problem.

from what i've seen so far the kit fits good there is two nsx that currently have this kit on there car which is the candy orange and another red nsx (not mine) and both nsx has very good fitment. if you have any other questions please let me know.

thank you,

son

 

[IAtuner]

Son,
Something doesn't look right. I like the widebody type....but this one is kind of odd. More like a boat...I don't know. I don't have a real word for it....but I am seeing something odd about this that I can't describe. It just doesn't flow with the rest of the line. Anywho, it is only my thought.

hello calvin at first when i saw pictures of this kit i agree i thought the same way but when you actually see this kit in person it is much better. my car should be done by feb and i'll take it to the monthly meets so you can check it out calvin or if you ever have time and your in city of industry area stop on by and you can check out the few nsx's there getting the wide body installed and also check out the veilside kit.

 

[IAtuner]

Son, I've tried geting ahold of you. Check you PM's.

sorry about that i've been so busy have not yet had time to go through my messages. sorry for any inconvience. call my at my office.

 

[PoohBEAR]

Are you freaking mad? meeeeeee? in an assembly line of widebody NSXs? don't tease me like soOOoo... :tongue: I might go nutz over wide ass on those nsx. Oh...ahem, I called endless a couple of times and no one pick up. Got an email? maybe that will help. Also, there will be a meeting next month. Will it be done than?

Cal

hello calvin at first when i saw pictures of this kit i agree i thought the same way but when you actually see this kit in person it is much better. my car should be done by feb and i'll take it to the monthly meets so you can check it out calvin or if you ever have time and your in city of industry area stop on by and you can check out the few nsx's there getting the wide body installed and also check out the veilside kit.

 

[IAtuner]

:biggrin: Anytime you liked to come and see the NSX's being worked on you are more than welcome to come if you like Calvin. Here is the contact for Auto R&D they take care of all the sponsorship & research and development for Endless USA.

Auto R & D (ASK FOR RISHIE)
1503 N. Milpitas Blvd.
Milpitas, CA. 95035
408-635-0000 tel
408-635-0011 fax
Paypal: [email protected]
Email: [email protected]

If you need to contact Kent @ Endless contact Kent by:

http://www.endlessusa.com/contact/

If you have anymore questions Calvin let me know and my NSX will be done around Feb. When is the next NSX meet?

Son

Are you freaking mad? meeeeeee? in an assembly line of widebody NSXs? don't tease me like soOOoo... :tongue: I might go nutz over wide ass on those nsx. Oh...ahem, I called endless a couple of times and no one pick up. Got an email? maybe that will help. Also, there will be a meeting next month. Will it be done than?

Cal

 

[IAtuner]

Here is the front end of the BRS kit on my 94' NSX. I have more pictures in my gallery.

 

[grinder]

I think BRS is the closest kit you can get that looks like this:



http://www.geocities.com/hookmeup91792/nsxconcept.html?1106535484298

 

[IAtuner]

UPDATED 2/7/04 FULL BRS KIT IS INSTALLED.

http://www.nsxprime.com/photopost/showgallery.php?cat=500&ppuser=7581

 

[Juice]

Son, what's with the stock exhaust and wheels? I thought you were using Taitecs center exit.

 

[IAtuner]

Son, what's with the stock exhaust and wheels? I thought you were using Taitecs center exit.

Josh,

:biggrin: LOL ... The Taitec will not fit unless I modify the rear diffuser. I will be doing that when I take it for paint in a few weeks. Josh your kit is leaving out today or tomarrow just need to pack it up and ship it. When you get this message contact me Josh.

Thanks,

Son