Search results

  1. j14nsx

    Received some parts today!

    cylinder liners......I think getting ready for mo' boost?
  2. j14nsx

    How many clubs are you a member of?

    NSXCB - NSX Club of Britain NSX Club Europe RAC - Royal Automobile Club - for breakdowns RAC MSA - RAC Motorsports Association, for race licence HCAAC - Herts County Automobile And Aero Club - for events LCAMC - London Counties Auto Motor Clubs, for sprint series All this too so I can race!
  3. j14nsx

    Extra Bumper Moldings on NSX - parallel parking ideas?

    I know what you need; Four posts, about 3ft high length of 'Police line - do not cross' tape Place one post at each corner of car, leaving at least 1 foot between posts and corners of car Attach tape to tops of each post, forming a perimeter around the car. :)
  4. j14nsx

    Post your Supercharge and Nitrous track times

    Are drag times what you were after? I would like to see a before/after comparison of road track times with and without FI.
  5. j14nsx

    How far do you drive to go to the track?

    Yes a tunnel, takes 30mins. Wolfgang, any plans on coming over here and trying some of our classic tracks?
  6. j14nsx

    How far do you drive to go to the track?

    Silverstone 1 hour Brands Hatch 2 hours Donington 2 hours Castle Coombe 2 hours Snetterton 2 hours Hethel (Lotus test track) 2 hours Goodwood 3 hours oh and Spa 5 hours Magny Cours 5 hours Nurburgring 5 hours I could go on.........:cool:
  7. j14nsx

    Berlina Black lower bumper skirt question

    Mine is all the same paint, same colour. The pic is after I had the front resprayed to cover stone chips.
  8. j14nsx

    They broke my door!!!

    I spent yesterday fixing a fellow NSXer's door amp. When taking the door panel off I said to the owner his door handle thingy was cracked, and will probably break soon. Some door thingies in advance would be a good idea. What bad luck he then had, after I put the door back together, he got in...
  9. j14nsx

    NSX mechanical, chassis and DIY wishlist for Honda

    1992 Right hand drive NSX coupe. Service indicator, for variable interval servicing. Maybe nice for cars that don't get driven much. Service manual included with every car. Well it did ask for DIY issues! With regard to Ken's jacking points. A centre rear point and front centre point are also...
  10. j14nsx

    Crazy friend of mine

    It's not a wing on the RX7. It's a high level handle to make it easier to push, when broken.
  11. j14nsx

    18 year old NSX driver :)

    Dimer, Maybe you can get your Dad to get a Civic or something for you to race him with! Youthful energy, and the lack of self-preservation that young people have, may make you faster! Kevin
  12. j14nsx

    Windshield wiper

    The turning part, might be a wiper and track system, so the wire is not being twisted and bent with the action of the wiper arms. Cut the wire and see what happens!:) Is there nothing in your owners manual?
  13. j14nsx

    Neo's Models #2 (no girl pix)

    No there isn't, as that's not an NSX. If it is, it's got a completely new dash, seats, doors . In fact everything been changed, almost making it different car altogether.:rolleyes:
  14. j14nsx

    Mr. Honda strikes again

    The European tranny is the same as the US one. At least the UK one is. If you can get to 83mph in second, it's the US tranny.
  15. j14nsx

    TEIN EDFC electronic dampening force controler for the nsx?

    The control boxes won't fit under the hood, as they sit on top of the dampers.
  16. j14nsx

    What did you have to sell for an NSX?

    A Prelude 2.2 VTEC, and a CIVIC 1.6 VTi. Almost a straight swap for the NSX.
  17. j14nsx

    Driving video

    mul1gan, the clanking are some spanners in the passenger footwell. zzrman, the camera is a Panasonic DV110 3CCD camera. I got it about 4-5 years ago, cost a fortune compared to cameras today. Of course, I always stick to the speed limits. I used a lower gerar than I would normally, to get the...
  18. j14nsx

    Driving video

    Hey! My camera was the smallest 3CCD camera you could get at the time! The problems of being an 'early adopter' of new technology. I've seen some cameras turn and come loose on smaller 'ball and socket' type mounts. That thing is going nowhere!
  19. j14nsx

    Driving video

    Sure. It's not as simple as just a mount though. I've added two threaded bosses to my harness bar (which is also custom made). Then made an aluminium platform for the camera to sit on. The camera sits at a nice height, almost head height. The mount does adjust so it will point at the dials if I...
  20. j14nsx

    Removing damaged suspension arm

    Is that the arm that got bent? Maye it won't come off now if it did, without cutting or something. I don't know personally whether is does come off or not though.
  21. j14nsx

    Neo's Models #2 (no girl pix)

    Sorry, you're wrong. The handbrake is on the left of the gear lever, on a RHD car.
  22. j14nsx

    Driving video

    I've just finished making a video camera mount, and took it out for a test. I thought I'd share the video I took of a favourite local road I get to drive on. It's not a 'kill' video, or showing how stupid I can be on a road, I stick to the speed limit. I hope some of you have or could make a...
  23. j14nsx

    Tired of all these perfect clean NSXs

    Ugh, what's that on the roof? I won't show you pics of the engine, I don't think you're strong enough to see them. So, anyone else have any dirrrty pics?
  24. j14nsx

    Tired of all these perfect clean NSXs

    Next up, an exhaust tip. Ohh look at the carbon/soot, whatever it is.
  25. j14nsx

    Tired of all these perfect clean NSXs

    I'm tired of seeing these perfect clean cars, in perfect California weather. Here's some pics of my car as it is today. Warning, some of pics may contain scenes that some of you find disturbing........ First up, a wheel.
Back
Top