What is the OEM Honda part number?

Joined
18 November 2010
Messages
1,057
Location
Pasadena, CA
For the '97+ front rotor bracket? That would allow me to bolt on '97+ rotors to my current ('91) setup? I can't find it in the oemacuraparts.com online catalog.

Thanks.
 
which rotor?? Brakes?
 
I just replaced the rotors on my '94 with Power Slot rotors. The only thing holding the rotor to the hub are two 14mm screws. #29 in the diagram. Part #93600-06014-0H. is that it?

=DREW=
 
Hi,

Honda doesn't sell the caliper bracket alone, only with the caliper itself.

and yes, you only need the 97+ bracket to use 97+ 300mm rotor, as
calipers and brackets are interchangable.


Nuno
 
Update: I found out that the mounting bracket is cast as part of the caliper itself, so if I want to run '97+ rotors, I have to buy the entire caliper.

Thanks for all those chimed in.
 
If i'm not mistaken, Stop Tech or Racing Brakes sell the 2nd gen front brake bracket by itself.
Not cheap but there's the poop.
Otherwise, look for someone to upgrade to BBS and buy their brackets '97 and newer.

Cheers
nigel
 
Last edited:
The RB brackets are quite expensive compared to the refurb ones sold by ASMotorSports. If Scorp can produce a set for $350, then that's a good deal. But at the end of the day, the 97+ brake package with rotors, pads, lines, etc will cost almost $2k all said and done. Not sure if that price justifies the performance increase.
 
Back
Top