Time to move these and move on to more products: These will go back to normal pricing once these 5 sets are gone.
The sway bar links are compiled of:
Front:
Components:
1. Male Heim Joint
2. Female Heim Joint
3. Tapered Spacer
4. Jam Nut
5. Mounting Bolt
6. Flange Lock Nut
1. Male Heim Joint
• Material: Steel housing with chrome plated spherical ball
• Radial load capacity: 5800 lbs
• Included grease fitting for easy lubrication
2. Female Heim Joint
• Material: Steel housing with chrome plated spherical ball
• Radial load capacity: 9100 lbs
• Included grease fitting for easy lubrication
3. Tapered Spacer
• Material: Delrin (Acetal Resin) Often used for bushings, impellers, gears and anything needing strength and rigidity
• Temperature Range: -20° to 180° F
• Machined with High Speed Steel tooling
• Taper allows spherical ball motion
4. Jam Nut
• Zinc-plated Grade 5 steel
• 19mm Hex
5. Mounting Bolts
• 18-8 Stainless Steel to prevent corrosion
• M12x1.75 threading
• 10mm hex-allen for tightening/loosening
6. Flange Lock Nut
• Zinc-plated Class 8 Steel
• Nylon-insert will prevent loosening from vibrations
• M12x1.75 threading
• Flange will will not allow wrench to slip over
• 18mm Hex
Here is a photo of the actual product
Rear:
Components:
1. Male Heim Joints
2. Turnbuckle Coupler
3. Tapered Spacers
4. Jam Nuts
5. Mounting Bolt 1
6. Mounting Bolt 2
7. Flange Lock Nut
1. Male Heim Joint
• Material: Steel housing with chrome plated spherical ball
• Radial load capacity: 5800 lbs
• Included grease fitting for easy lubrication
• One is RH threading, other is LH threading for easy length adjustments without removing the mounting bolts
2. Turnbuckle Coupler
• Material: Zinc Plated Grade 5 Steel
• 5/8” or 16mm Hex
• Threaded with both RH and LH threads
3. Tapered Spacers
• Material: Delrin (Acetal Resin) Often used for bushings, impellers, gears and anything needing strength and rigidity
• Temperature Range: -20° to 180° F
• Machined with High Speed Steel tooling
• Taper allows spherical ball motion
4. Jam Nut
• Zinc-plated Grade 5 steel
• 19mm Hex
5. Mounting Bolt 1
• 18-8 Stainless Steel to prevent corrosion
• M12x1.75 threading
• 10mm hex-allen for tightening/loosening
6. Mounting Bolt 2
• 18-8 Stainless Steel to prevent corrosion
• M12x1.75 threading
• 10mm hex-allen for tightening/loosening
7. Flange Lock Nut
• Zinc-plated Class 8 Steel
• Nylon-insert will prevent loosening from vibrations
• M12x1.75 threading
• Flange will will not allow wrench to slip over
• 18mm Hex
And photo-
The toe arms:
Components:
1. Male Heim Joints
2. Turnbuckle Coupler
3. Tapered Bushings
4. Jam Nuts
5. Mounting Bolt
6. Flat Washer
7. Flange Lock Nut
8. Taper Sleeve Bushing
9. Straight Sleeve Bushing
1. Male Heim Joint
• Material: Steel housing with chrome plated spherical ball
• Radial load capacity: 6800 lbs
• Included grease fitting for easy lubrication
• One is RH threading, other is LH threading for easy length adjustments without removing the mounting bolts
2. Turnbuckle Coupler
• Material: 6061 Gold Annodized Aluminum
• Hex on one end for adjustments
• Threaded with both RH and LH threads
3. Tapered Bushings
• Material: Delrin (Acetal Resin) Often used for bushings, impellers, gears and anything needing strength and rigidity
• Temperature Range: -20° to 180° F
• Machined with High Speed Steel tooling
• Taper allows spherical ball motion
4. Jam Nut
• Zinc-plated Grade 5 steel
• 15/16” or 24mm Hex
5. Mounting Bolt
• Alloy Steel (stronger than Grade 8) with 12 point hex head
• 3/8”-16 threading
• 3/8” or 10mm 12 point wrench/socket for tightening/loosening
6. Flat Washer
• Extreme Strength Grade 9 Steel
• 13/32” through hole
7. Flange Lock Nut
• Zinc-plated Class 8 Steel
• Nylon-insert will prevent loosening from vibrations
• 3.8”-16 threading
• Flange will will not allow wrench to slip over
• 9/16” Hex
8. Taper Sleeve Bushing
• 6061 Aluminum
• Machined with high speed steel tooling
• Tapered end mates with factory taper on spindle
• Precision machined for press fit taper bushings
9. Straight Sleeve Bushing
• 6061 Aluminum
• Machined with high speed steel tooling
• Precision machined for press fit taper bushings
• Precision machined with fit in factory subframe
• **Original OEM bolt will be reused
Photo-
These products will help in several ways such as reducing the slight give in the suspension under extreme loads. Removing all of the rubber where these pieces are replaced and adding the metal will no longer allow the bushings to compress causing movement in the suspension.
If you have aftermarket sway bars currently you will notice the OEM links will eventually fail. With our serviceable all metal ones the strength will be there in those high load conditions and give you that confidence in those situations.
A couple installed pics:
We really want to get these in peoples hands and get some reviews. So Here is the group buy on the products:
All 3 products together for these 5 sets will be
$475.00 SHIPPED in the Continental US. I'll gladly ship to other places but that cost would be additional.
We would just ask that once you receive them please review them honestly and let us know.
We accept Paypal, Visa, MC, Discover, Checks, Cash,
As always we do offer installation if you are local.
PM is best.
Paypal address is [email protected]
The sway bar links are compiled of:
Front:
Components:
1. Male Heim Joint
2. Female Heim Joint
3. Tapered Spacer
4. Jam Nut
5. Mounting Bolt
6. Flange Lock Nut
1. Male Heim Joint
• Material: Steel housing with chrome plated spherical ball
• Radial load capacity: 5800 lbs
• Included grease fitting for easy lubrication
2. Female Heim Joint
• Material: Steel housing with chrome plated spherical ball
• Radial load capacity: 9100 lbs
• Included grease fitting for easy lubrication
3. Tapered Spacer
• Material: Delrin (Acetal Resin) Often used for bushings, impellers, gears and anything needing strength and rigidity
• Temperature Range: -20° to 180° F
• Machined with High Speed Steel tooling
• Taper allows spherical ball motion
4. Jam Nut
• Zinc-plated Grade 5 steel
• 19mm Hex
5. Mounting Bolts
• 18-8 Stainless Steel to prevent corrosion
• M12x1.75 threading
• 10mm hex-allen for tightening/loosening
6. Flange Lock Nut
• Zinc-plated Class 8 Steel
• Nylon-insert will prevent loosening from vibrations
• M12x1.75 threading
• Flange will will not allow wrench to slip over
• 18mm Hex
Here is a photo of the actual product
Rear:
Components:
1. Male Heim Joints
2. Turnbuckle Coupler
3. Tapered Spacers
4. Jam Nuts
5. Mounting Bolt 1
6. Mounting Bolt 2
7. Flange Lock Nut
1. Male Heim Joint
• Material: Steel housing with chrome plated spherical ball
• Radial load capacity: 5800 lbs
• Included grease fitting for easy lubrication
• One is RH threading, other is LH threading for easy length adjustments without removing the mounting bolts
2. Turnbuckle Coupler
• Material: Zinc Plated Grade 5 Steel
• 5/8” or 16mm Hex
• Threaded with both RH and LH threads
3. Tapered Spacers
• Material: Delrin (Acetal Resin) Often used for bushings, impellers, gears and anything needing strength and rigidity
• Temperature Range: -20° to 180° F
• Machined with High Speed Steel tooling
• Taper allows spherical ball motion
4. Jam Nut
• Zinc-plated Grade 5 steel
• 19mm Hex
5. Mounting Bolt 1
• 18-8 Stainless Steel to prevent corrosion
• M12x1.75 threading
• 10mm hex-allen for tightening/loosening
6. Mounting Bolt 2
• 18-8 Stainless Steel to prevent corrosion
• M12x1.75 threading
• 10mm hex-allen for tightening/loosening
7. Flange Lock Nut
• Zinc-plated Class 8 Steel
• Nylon-insert will prevent loosening from vibrations
• M12x1.75 threading
• Flange will will not allow wrench to slip over
• 18mm Hex
And photo-
The toe arms:
Components:
1. Male Heim Joints
2. Turnbuckle Coupler
3. Tapered Bushings
4. Jam Nuts
5. Mounting Bolt
6. Flat Washer
7. Flange Lock Nut
8. Taper Sleeve Bushing
9. Straight Sleeve Bushing
1. Male Heim Joint
• Material: Steel housing with chrome plated spherical ball
• Radial load capacity: 6800 lbs
• Included grease fitting for easy lubrication
• One is RH threading, other is LH threading for easy length adjustments without removing the mounting bolts
2. Turnbuckle Coupler
• Material: 6061 Gold Annodized Aluminum
• Hex on one end for adjustments
• Threaded with both RH and LH threads
3. Tapered Bushings
• Material: Delrin (Acetal Resin) Often used for bushings, impellers, gears and anything needing strength and rigidity
• Temperature Range: -20° to 180° F
• Machined with High Speed Steel tooling
• Taper allows spherical ball motion
4. Jam Nut
• Zinc-plated Grade 5 steel
• 15/16” or 24mm Hex
5. Mounting Bolt
• Alloy Steel (stronger than Grade 8) with 12 point hex head
• 3/8”-16 threading
• 3/8” or 10mm 12 point wrench/socket for tightening/loosening
6. Flat Washer
• Extreme Strength Grade 9 Steel
• 13/32” through hole
7. Flange Lock Nut
• Zinc-plated Class 8 Steel
• Nylon-insert will prevent loosening from vibrations
• 3.8”-16 threading
• Flange will will not allow wrench to slip over
• 9/16” Hex
8. Taper Sleeve Bushing
• 6061 Aluminum
• Machined with high speed steel tooling
• Tapered end mates with factory taper on spindle
• Precision machined for press fit taper bushings
9. Straight Sleeve Bushing
• 6061 Aluminum
• Machined with high speed steel tooling
• Precision machined for press fit taper bushings
• Precision machined with fit in factory subframe
• **Original OEM bolt will be reused
Photo-
These products will help in several ways such as reducing the slight give in the suspension under extreme loads. Removing all of the rubber where these pieces are replaced and adding the metal will no longer allow the bushings to compress causing movement in the suspension.
If you have aftermarket sway bars currently you will notice the OEM links will eventually fail. With our serviceable all metal ones the strength will be there in those high load conditions and give you that confidence in those situations.
A couple installed pics:
We really want to get these in peoples hands and get some reviews. So Here is the group buy on the products:
All 3 products together for these 5 sets will be
$475.00 SHIPPED in the Continental US. I'll gladly ship to other places but that cost would be additional.
We would just ask that once you receive them please review them honestly and let us know.
We accept Paypal, Visa, MC, Discover, Checks, Cash,
As always we do offer installation if you are local.
PM is best.
Paypal address is [email protected]