replacing clutch and slay cyclinder

[Kelly's NSX]

looking to replace clutch and slave cyclinder next week. wondering if anyone knows part numbers for the cotter pins required. looks like there is only one required but i thought i read somewhere that theres one for the clutch cylinder and one for the slave cyclinder. i know about the o ring already thanks guys.

 

[Larry Bastanza]

Cotter Pin = 94201-20300

If you want to update it, is the later years they updated this to a spring clip that you just pull off/on and reuse. Way better IMO. For that you need these:

Spring Clip 46911-S70-003
Pin 46912-SD4-000

These parts are all in about the $3 ea. range.

And there is only one cotter pin on the master, nothing on the slave.

HTH,
LarryB

 

[Kelly's NSX]

is there an easy way to remove the cotter pin?? and replace. What tool should i use.

 

[RON98]

is there an easy way to remove the cotter pin?? and replace. What tool should i use.

long nose plyers will work great.

have an extra one to replace it.

if pulling does not work, try grabbing the cotter pin then spinning the plyers so it pulls out the CP.

happy motoring

Rob:smile: