Relays?

Joined
14 May 2007
Messages
11,224
Location
Beaumont, Texas
Well I'm changing some relays due to age although they all work. I've replaced main/fuel pump, but Acura dealer here does not have a clue as to where the radiator fan and AC condensor fans relays are and I've found nothing marked "radiator fan" or "aux. fan." I've found fuses but no marked relays. Anybody know. Huge thanks.
 
according to the manual, the radiator relays are in the middle relay box in the picture below(#6). You should check out the manual, it's all there.

13sl00_b13.gif
 
i think there is a FAN relay in the firewall...near the ECU... don't know exactly which one though...
 
i went for the info....HERE it is.... look for part number 5:

005 37735-PR7-A01 CONTROL UNIT, RADIATOR FAN


don't know if it what you was looking for...
 
The item 005 37735-PR7-A01 CONTROL UNIT, RADIATOR FAN is a control unit and does not contain the relays which switch the "big" currents to the fans. Relays could get fouled by electric arcing which eats the contact material over time.

See page 23-112 of the downloadable Service Manual (is available on the NSX Prime website in PDF). Or click here:

http://www.nsxprime.com/photopost/showphoto.php?photo=29206&ppuser=14650

Your relays are in Sub Relay Box A as member ak has pointed out.
 
The item 005 37735-PR7-A01 CONTROL UNIT, RADIATOR FAN is a control unit and does not contain the relays which switch the "big" currents to the fans. Relays could get fouled by electric arcing which eats the contact material over time.

See page 23-112 of the downloadable Service Manual (is available on the NSX Prime website in PDF). Or click here:

http://www.nsxprime.com/photopost/showphoto.php?photo=29206&ppuser=14650

Your relays are in Sub Relay Box A as member ak has pointed out.
This is the reason I'm replacing them NOW. I feel it's a great insurance policy and a very small investment to replace them here and there to keep myself from being left stranded down the road. I personally think everyone who buys an older NSX should immediately replace the "main" relay.:smile:
 
Back
Top