Is it the box you need or the performance? If the latter, then isnt it just the final drive ratio that changes over a std 6 speed?
HTH,
-
***AVOID MARKETPLACE SCAMS!!***
Scammers are using compromised Prime member accounts to pose as a trusted seller in the marketplace. Before you enter into a deal with any seller, follow these tips to keep yourself safe. If you encounter one of these scammers, please report them immediately and we will lock their account.
Caveat Emptor!
Procar Specials NSX
- Thread starter Procar Specials
- Start date
HTH,
although my car is a 97... it's a early 97 before the NA2...so 5spd... and i'll probably need a major work on my gearbox...so, instead of spending a boat load on it, i think it's smarter to buy the NA2R one...it's new (problem soved) and i start to have that 6th speed :wink:
The seats are sold, thanks
This was probably the last set, which we could get.
Please no further inquiries.
Maybe some of you know that we tried to get the seat molds from Recaro,
which are stored in germany during the production process.
(These cf seats buckets are made in germany !)
Honda Japan took back that molds to japan, so Recaro is not able to produce them into future.
We could take our seats to make a new tool for Recaro, but this will cost us
~ 50000 Euro. We have to pass. :biggrin:
These special NSX-R gearboxes are great, maybe you can see that the 6th gear is changed. (shorter)
Its a special production for Procar.
just out of curiosity, why can't you make a new mold from one of the shells that passes by you? i don't see a problem, is like take a mold of a hood, a wing, etc :wink:
how i wish i could afford one of those. PM me the price, so i can stop dreaming :frown:
Hi, sorry, I dont have had my 2nd cup of coffee into the morning, so I made a mistake telling that story. :wink:
Procar cant do that molds, its a very security relevant part, so only Recaro has enough experience to make the new tool.
I can deliver the buckets to Recaro, that means that Recaro will get money for the same job again, because Honda reclaimed all tools.
I know that this happened in year 2006, right after Honda stopped the production.
Thats also an evidence, that Honda will never built seats like that, what is
very shame.
These are the best seats into the world.....some friends do think the same.
http://www.nsxprime.com/forums/showthread.php?t=86291
Paul, we will produce that special version (no radio) for you over wintertime,
surely also for your RHD NSX center console.
(pictures from the 1th installation of RHD door insert cf parts over the weekend)
Thanks for your input.
you can expect that quality :biggrin:
surely also for your RHD NSX center console.
(pictures from the 1th installation of RHD door insert cf parts over the weekend)
Thanks for your input.
you can expect that quality :biggrin:
As I've come to expect from you Detlef. My other parcel arrived today but I can't collect until Monday so I have a frustrating weekend to wait!
regards, Paul
Paul, sorry to hear that you cant install your new toys over this weekend.
I can pm you some advices how your weekend can get better :biggrin:
Russell, we have a small delay shipping the door inserts.
They will be ready for install next monday, we expect to ship them with the other door parts until next wednesday.
Peter, please check email.
We have your new NA1R hood into our truck next week friday at the Nürburgring.....
The airduct is produced too, you got some pictures.
92NSX
please check pm
offer sended
please check pm
offer sended
pictures from todays work before packing (luckily we have some sun)
Russell, your RHD passenger new door cf insert :smile:
Scott, your NA1 airduct
Marcus, RWG, LPS and fender scoop
Richard, your deck lip spoiler and diffusor
ALL PARTS WILL BE SHIPPED NEXT WEEK WEDNESOR OR THURSDAY,
PLEASE CHECK EMAIL FOR FURTHER DETAILS........
hope you all are happy :biggrin:
Russell, your RHD passenger new door cf insert :smile:
Scott, your NA1 airduct
Marcus, RWG, LPS and fender scoop
Richard, your deck lip spoiler and diffusor
ALL PARTS WILL BE SHIPPED NEXT WEEK WEDNESOR OR THURSDAY,
PLEASE CHECK EMAIL FOR FURTHER DETAILS........
hope you all are happy :biggrin:
these brandnew NSX-R parts are also for sale:
Honda NSX-R NA2 wheels with centercaps, valves and stickers
lighter than the painted standard wheels, the real deal !
Honda NSX-R NA2 showa suspension
Honda NSX-R NA2 wheels with centercaps, valves and stickers
lighter than the painted standard wheels, the real deal !
Honda NSX-R NA2 showa suspension
last post for today :wink:
we do sale a used set of MUGEN NA1 blinker covers. (very rare stuff)
we also have 2 Procar blinker covers sets left
from the Procar limited edition version (10 sets produced)
1x clear, 1x smoked
please send us email for details, thanks
news:
the conception for the new complete carbonfiber dashboard will start tomorrow, we hope having that part ready for sale next spring.
An alcantara version (NA1R style) will follow too.
we do sale a used set of MUGEN NA1 blinker covers. (very rare stuff)
we also have 2 Procar blinker covers sets left
from the Procar limited edition version (10 sets produced)
1x clear, 1x smoked
please send us email for details, thanks
news:
the conception for the new complete carbonfiber dashboard will start tomorrow, we hope having that part ready for sale next spring.
An alcantara version (NA1R style) will follow too.
Senninha and Vance,
pm sended
pm sended
Depending from the payment, these wheels are sold to CANADA.
Do you like that look ?
we have 1 NSX-R engine cover ready for sale.
(brandnew into the box)
Comes with special stay kit and all stuff around
please pm or email for offer incl shipment
(we have to know your location)
we have 1 NSX-R engine cover ready for sale.
(brandnew into the box)
Comes with special stay kit and all stuff around
please pm or email for offer incl shipment
(we have to know your location)
SOLD, thanks.
Eric, please check your email with tracking details
we will have a new Procar NA2RR hood spec2 here until middle of next week.
We let go that hood for the price of an spec1 hood as special introduction offer before NSXPO 2007.
Because this new generation is our own creation (no direct copy from NSX-R hood 3D dimensions) that hoods comes with a fitment quarantee.
No alignment is necessary if there are original Honda parts installed around.
(fenders, lights, bumper etc)
Actually we are busy to get some 6 speed lockout boxes first.
These gearboxes are special, because the 6th gear is shorter than JDM NSX-R
version :biggrin:
we still miss the invoice for shipment and custom fees for a total calculation.
after thar it should be simple... there is no customs from Germany to Portugal...and the shipping shouldn't be that much :biggrin: :biggrin: :biggrin:
my problm is the gearbox itself....
Tom, installation guide for the airduct sended.
Please check email
The gearbox have a lot of weight, this unit only can be shipped into a wooden box from a spediteur via truck from here.
Please check email
Bo custom fees, thats right.
The gearbox have a lot of weight, this unit only can be shipped into a wooden box from a spediteur via truck from here.
we will have a new Procar NA2RR hood spec2 here until middle of next week.
We let go that hood for the price of an spec1 hood as special introduction offer before NSXPO 2007.
Because this new generation is our own creation (no direct copy from NSX-R hood 3D dimensions) that hoods comes with a fitment quarantee.
No alignment is necessary if there are original Honda parts installed around.
(fenders, lights, bumper etc)
SOLD, thanks
Jeff, you will get NA2RR hood spec 2 with production no 09/25.
Please check email with shipment details for end of next week.
The actual Procar cf parts stock list:
1x airbox
1x NA1 headlight covers
1x deck lip spoiler
1x diffusor
1x side mirrors
1x NA2 airduct
1 more NA1 and NA2 hood will be available end of the month, probably :wink:
Ko-nsx, pm'd with side mirror offer.
We let go that hood for the price of an spec1 hood as special introduction offer before NSXPO 2007.
Because this new generation is our own creation (no direct copy from NSX-R hood 3D dimensions) that hoods comes with a fitment quarantee.
No alignment is necessary if there are original Honda parts installed around.
(fenders, lights, bumper etc)
SOLD, thanks
Jeff, you will get NA2RR hood spec 2 with production no 09/25.
Please check email with shipment details for end of next week.
The actual Procar cf parts stock list:
1x airbox
1x NA1 headlight covers
1x deck lip spoiler
1x diffusor
1x side mirrors
1x NA2 airduct
1 more NA1 and NA2 hood will be available end of the month, probably :wink:
Ko-nsx, pm'd with side mirror offer.
Last edited:
we have these parts for sale:
1x NSX-R NA2 JDM spoiler (The original)
1x NSX-R NA2 JDM spoiler PROTOTYPE PART FROM HONDA R&D JAPAN
(was installed at the 1th test NSX-R)
adjustable middle part, high downforce version
Procar version available soon :biggrin:
1x NSX-R Tokio motorshow showcar (unicate)
we got it from HONDA R&D JAPAN
the new Procar NSX-RR spoiler (2nd generation) will be introduced until end of the year.
1x NSX-R NA2 JDM spoiler (The original)
1x NSX-R NA2 JDM spoiler PROTOTYPE PART FROM HONDA R&D JAPAN
(was installed at the 1th test NSX-R)
adjustable middle part, high downforce version
Procar version available soon :biggrin:
1x NSX-R Tokio motorshow showcar (unicate)
we got it from HONDA R&D JAPAN
the new Procar NSX-RR spoiler (2nd generation) will be introduced until end of the year.
What do you mean "unicate"
The "2nd generation" i presume will be the adjustable version shown above?
Tom, please check email about NSX-R gck kit shipment
rasir_x....will answer later
rasir_x....will answer later
Unicate means that this is the spoiler which was installed at the Tokio motorshow NSX-R. We got that prototype.
No brake light, flat buttom side of the spoiler, exposed cf.
No, the adjustable version will be produced as limited edition of 10 units
for some special customers, as master we will use the unit which
was installed at the 1th prototype NSX-R. (see picture)
The 2nd generation (NSX-RR) spoiler will be an evolution of the existing spoiler. Details and pictures soon.
Joseph, price info pm'd
Last edited:
Hi Detlef,
Would I be right to think that this adjustable spoiler was only produced by Honda for R&D purposes to deliver the best angle for the fixed spoiler? I ask this as the NSX is considered by many to be one of the best balanced cars, so surely obtaining the right angle for the spoiler would maintain the F to R balance of the non NSX-R model as well as inproving the new aero package?
I shall watch with interest for your NSX-RR developments :smile:
Also, given some recent comments in another thread, I find it quite amusing how poor the fitment of the OEM hood in the above picture. I'm pleased to say that my Procar hood is easily as good as OEM fitment!
regards, Paul
