paint
- Thread starter bjnz
- Start date
bjnz,
The Formula Red NSX has a red tint in the clear coat. It is the only color that has tint in the clearcoat.
HTH,
LarryB
The Formula Red NSX has a red tint in the clear coat. It is the only color that has tint in the clearcoat.
HTH,
LarryB
Larry is right.
Also, you shouldn't be using any kind of wax (such as a "cleaner wax") that is abrasive enough to remove paint.
Products that are abrasive (which also include everything from swirl mark remover to rubbing compound) should be used only as a last resort for problems with the finish that cannot be fixed through any other means.
[This message has been edited by nsxtasy (edited 22 May 2002).]
Also, you shouldn't be using any kind of wax (such as a "cleaner wax") that is abrasive enough to remove paint.
Products that are abrasive (which also include everything from swirl mark remover to rubbing compound) should be used only as a last resort for problems with the finish that cannot be fixed through any other means.
[This message has been edited by nsxtasy (edited 22 May 2002).]
bjnz, don't worry you're not alone. I have the exact same problem with my '96 formula red. Appears formula red is the only color with a redish clear coat. To reduce residue, try waxing with a gentle motion. Residue normally appears when you wax too hard or apply pressure on the paint.
