OBD2 Service plug location

[wntsom4]

Question:

Being that I've never needed to check for codes but if I had a code reader, where is the actual OBD2 plug??? I have located the blue plug that has given me the trouble codes but there not coming up on any list so I have the reader but I want to know where is the actual plug to hook up the reader..

 

[NSXCessive]

Question:

Being that I've never needed to check for codes but if I had a code reader, where is the actual OBD2 plug??? I have located the blue plug that has given me the trouble codes but there not coming up on any list so I have the reader but I want to know where is the actual plug to hook up the reader..

Its just under the glove box in the underpannel strip hidden under a black cover that pops off. Carefully pry the cover to remove it a small flat/spade screw driver will do the trick. Connect service connector then turn ignition to the on position. The code reader will start to show what codes have been thrown.

 

[angus]

on the 2000-up cars it is under the driver side dash.

 

[NSXCessive]

on the 2000-up cars it is under the driver side dash.

Mine is a '00 and the service connector plug is under the glovebox under a plastic cover at least that is where I've plugged my ODBII code reader into... did it change on the '02+ cars by chance?

 

[Bram]

Richie you are correct, the OBD11 plug location changed on the 2002 -2005.

On 95-2001 the OBD11 are still under the glove box.

Bram

 

[NSXCessive]

Richie you are correct, the OBD11 plug location changed on the 2002 -2005.

On 95-2001 the OBD11 are still under the glove box.

Bram

I though it changed in later years as mine is still under the glovebox & an '01 I looked at was in the same location. 02+ on drivers side... Thanks for confirming.

 

[angus]

Sorry I meant '02-up - I guess you guys figured it out...