As the subject header states.
I am particularly interested in the type and location of the bracket used on the inside driver side fender wall in front of the ABS unit. Does it have 3 or 4 stand alone prongs to attach the three separate harness attachments?
On my 98, the bracket - unconnected - looks like the picture below. The two harnesses attach to the back of the bracket; the third harness is attached as you look at the bracket; it is loose below the frame now. The last prong on the right is not used.
I need a tad more clearance to my already customized Dali radiator duct. Unless I cut off the fourth prong, I may have to shift the bracket toward the ABS unit by drilling a hole and nipping the lower tongue of the bracket.
I want to put a bracket extension from the fender wall to hold the radiator duct up and steady rather than have the fourth prong rub the duct. TIA.
I am particularly interested in the type and location of the bracket used on the inside driver side fender wall in front of the ABS unit. Does it have 3 or 4 stand alone prongs to attach the three separate harness attachments?
On my 98, the bracket - unconnected - looks like the picture below. The two harnesses attach to the back of the bracket; the third harness is attached as you look at the bracket; it is loose below the frame now. The last prong on the right is not used.
I need a tad more clearance to my already customized Dali radiator duct. Unless I cut off the fourth prong, I may have to shift the bracket toward the ABS unit by drilling a hole and nipping the lower tongue of the bracket.
I want to put a bracket extension from the fender wall to hold the radiator duct up and steady rather than have the fourth prong rub the duct. TIA.
Last edited:
