LoveFab LF-3 BUILD

Shop placed one tweeter high and one low on opposite sides.
So rather than replacing door panel they decided to install a set of rockford tweeters and didn't charge for mess up or tweeters. I guess the only sad part is living with those dimples around tweeters......it's killing me!


Can you explain some more?

What was your original intention, just the the JBL tweeters right above the door handles?
And then the placement of the tweeters didn't match from left door to right door, so they just popped two more tweeters in at the bottom???
 
Last edited:
Can you explain some more?

What was your original intention, just the the JBL tweeters right above the door handles?
And then the placement of the tweeters didn't match from left door to right door, so they just popped two more tweeters in at the bottom???

"What was your original intention, just the the JBL tweeters right above the door handles?"
Correct.

They placed one JBLl high and the other low on opposite sides.
They offered to replace one lower side or place a free set in to match sides.
 
^^^^ Sick ride!! Those Spoon mirrors are perfect for your setup!
 
"What was your original intention, just the the JBL tweeters right above the door handles?"
Correct.

They placed one JBLl high and the other low on opposite sides.
They offered to replace one lower side or place a free set in to match sides.

So on your left door panel the JBL is below the door handle and the rockford is above the door handle?
 
So on your left door panel the JBL is below the door handle and the rockford is above the door handle?
They had 1 JBL up high on one door and one JBL low on the other door. For corrective action, they placed JBL's uptop and free Rockfords down low.

- - - Updated - - -

Those creases/dimples would definitely bug the hell out of me too!
Thanks Synth....that helps.:smile:
Those dimples are killing me softly......
 
They had 1 JBL up high on one door and one JBL low on the other door. For corrective action, they placed JBL's uptop and free Rockfords down low.

:eek: How does a shop even make that mistake??

Sorry to hear about this Todd, I'm sure you must've been pretty upset when you saw it.
 
:eek: How does a shop even make that mistake??

Sorry to hear about this Todd, I'm sure you must've been pretty upset when you saw it.

Very frustrated. They put the new guy on the door panels. Maybe if I had driven the car there they would have charged me more
but done it right.
 


mods update
Exterior mods:
Mode4 NSX bumper
TommyKaira/Rowen Front lip w/LED
TommyKaira/Rowen Gurney flap
Spoon mirrors
Border Racing Fenders
CF rear Garnish
SEIBON louvered CF hood
SEIBONroof cap
Downforce NSX-R DF-R rear spoiler
Downforce Stacy side skirts
Downforce side ducts
Downforce side strakes
Downforce Sports Diffuser
Downforce Rear CF license plate bezel

JDM clear side markers


Ride mods:
LoveFab front lower chassis brace
LoveFab front upper chassis brace
LoveFab rear strut tower chassis brace
Forgestar f14 wheels

Crossed Drilled & slotted rotors
BC Coilovers

Engine Accessories:
Dali Racing Billet 6061 Intake Manifold Cover
Dali Racing Injector Covers
Dali Racing alternator belt cover
S2carbonworks Throttle body cover
S2carbonworks radiator cooling panel

Interior mods:
Pioneer Avic Z3

AP-X box w/Pioneer IB-Flat Sub
JBL 1370-Watt 3-Channel
JBL MS-62C 6.5" 2-Way Component Speaker
ScienceofSpeed Navpod
ScienceofSpeed Navpod bracket

ScienceofSpeed VGA monitor
ScienceofSpeed Speaker panel

ScienceofSpeed center console
GaugeArt Gauges
Rear view camera
MUVI NPNG camera
Hero 3 black Edition camera
ScienceofSpeed Rapid "CoolTouch" Black Derlin shift knob

Engine mods:
ScienceofSpeed Stage 1 built motor
RPS billet Twin Disc carbon clutch
LoveFab LF600 turbo


LoveFab FI-Spec headers
LoveFab Secondaries
LoveFab WAIC system
LoveFab WAIC coolant reservoir
LoveFab WAIC twin-exchangers

LoveFab WFS NSX Chassis 3 Bar Bracing System
High volume WAIC pump
LoveFab charge piping, couplers, and clamps
LoveFab WOFI exhaust system
LoveFab Twin Chamber Coolant Tank w/Catch CAN

TiAL MVR wastegate
TiAL Q Blow off valve

Precision 58/62 turbo charger
Oil feed and return lines
RC 750cc injectors
Walbro 255lph fuel pump
AEM EMS 30-1042
Boost control solenoid
AEM UEGO
ScienceofSpeed Turbo Oil Reservoir
Exa-Pump
AEM Series 2 Programmable Engine Management System
AEM Boost Gauge
AEM Air Ratio Gauge

 
Last edited:
I think you are very happy how it turned out....but are you done?
 
I think you are very happy how it turned out....but are you done?

Does "done" exist in the NSX community? :biggrin:
I think Caroline-NSX or nsxot1c can answer that1 best.
future mods:
1. kite garage rear fenders
2. 18/19 wheels
3. bbk
4. Tail light update
5. Seat update
6. steering wheel update
7. done(yea right) lol.

And yes, I'm happy/content where I'm at right now.
I would have loved to have had that 3.4/3.5 under the hatch pushing 650whp
but I think I've found a happy median....
The thought of pushing the NSX to it's fullest potential possible without compromising looks,comfort, ride or any of the "pluses" would be the idle time to be "done"

O-yea Doc, I have a surprise for you.:biggrin:
 
Last edited:
docjohn, your officially a trendsetter. Bumble is digging your swagger.

<iframe width="560" height="315" src="//www.youtube.com/embed/D9jTDcAuHpg" frameborder="0" allowfullscreen=""></iframe>

- - - Updated - - -

When are any of us ever really done with our NSXs?

Looking great. Keep it up
Thanks.
 
Last edited:
haha......trendsetter indeed.Come to think about it I should sue the transformer franchise for copyright infringement :biggrin:
 
Last edited:
Are the DF lower side step discontinued?

Not sure but I've heard talk of it. I would contact DF and ask or I can inquire for you.


Thanks Jason. I look 4wrd2 seeing your progression. When will you be back in Atlanta?
 
Last edited:
Back
Top