OK, you guys are BOTH equally funny looking! Then again, I'm not one to talk, I'm probably a strong contender...
I purchased the JDM / Euro fogs for my DRLs as well and did the install and wiring. It's not difficult, just time consuming and I can help out. To do it right, here are some of the things you need to get / be prepared to do...
1. 2 x OEM JDM / EURO Fog light mounting brackets (the lights will not mount without these, if you don't have them, order them from Dali Racing) + required mounting stainless bolts (4 bolts 2 sizes, can't remember the sizes)
2. 30A relay and lots of power wire for the wiring (12ga and 14ga) get red and black to help id +ve and -ve
3. Drill a hole through the front firewall into the interior cabin (use grommet)
4. Run the trigger wire to IG2 for DRL operation
There are OEM connectors for the fog lights tucked away in the bumper and not used that can be clipped and used for the wire harness.
If you are up for it, I don't mind supervising and providing the technical assitance / reference for you.
My car is still out of commission but my injectors are ready and being shipped back from RC Engineering next week. I'm still short an exhaust or we could use my car as reference...