Almost 1,000 Yellow Horsepower!
- Thread starter KR inspire
- Start date
I remember that turbo EK Civic hatch back when it was Championship white! I'll be on the lookout for the next issue of Turbo. Nice NSX too :biggrin:
your nsx looks very nice but do something about the front license plate, will ya? 
ak said:your nsx looks very nice but do something about the front license plate, will ya?
yeah ditch it.....!!!
I've never been pulled over for no front plate, and none of my vehicles have one. If I was stopped....I'd just say "this car is waay to sweet to screw it up with a front plate" I'm sure I'll get away with it :smile:
Beautiful car thought
Soooo, how is the 1000 divided up? 
HAHAHA trust me i will be ditching the plate once again, but if you could imagine the dumb luck of getting pulled over on the same street at nearly the same cross streets right after taking care of the first ticket for the front plate, getting the same ticket again 2 weeks after I had mailed in the previous one. First one on the way to work, the second on the way home.
The Civic has 675hp and the NSX has 275hp, if i still had my yellow Integra i could've had a 1000 yellow hp =P
KR inspire said:
Some cops can be real hard asses....especially for something as little as "no front plate". I would say it was the car that got you the ticket but my buddy got one while driving an old beat up Olds. I know why the law is there, however I'm not going to ruin the look of my 50K car just to follow some outdated rule.
I might if I got a couple tickets in a row :redface:
KR,
Beautiful cars! Do you by chance a pic of the NSX with the black wheels as shown in your avatar?
Beautiful cars! Do you by chance a pic of the NSX with the black wheels as shown in your avatar?
That car is sick. With the black wheels, could you tell me what drop springs you used and what size/offset those wheels and tires are?
Is that OEM side skirt or aftermarket?
Im on the HKS Hipermax II's coilovers (List: $2,725.00) and the wheels the offsets were all incorrect, they were off my friends S2K..18" all the way around, you would have to go 18" Front and 19" rears to have the correct offset and wheel set up..17" in that wheel only comes 2pc...+56 fronts 18x8 and +63 rear on 18x9.5...
Pretegra said:
The side skirts are ROUTE KS ones made from PFRP.
Looks good, no doubt about that but I don't know how you can drive with it that LOW! 
Is it 'Transformers' and you have a push button?
Is it 'Transformers' and you have a push button?
I bought the same wheels for my Rio Yellow S2K. I bought them from a guy named Mike who works @ Evasive. Is your freind Mike ?
- Joined
- 19 November 2002
- Messages
- 633
KR inspire said:
Is your car at SP a lot?!, or do you work at SP engineering?!....they have a lot of nice cars that come out of there, but the price is
....so lets say when i come down to SP again, maybe you can give me a ride in that ek :biggrin: I used to have 400 ITR-turbo...it was fun....gotta feel how 600whp feels like!
brandonson said:
LOLZ those were your wheels on my car =X..Yeah me and Mike are good friends.
Alittleboost said:Is your car at SP a lot?!, or do you work at SP engineering?!....they have a lot of nice cars that come out of there, but the price is
I used to have 400 ITR-turbo...it was fun....gotta feel how 600whp feels like!
Yes I work at SP Engineering...the NSX is here every day, its my daily driver since i cant drive the civic much...it kinda sucks driving the Civic on the street...car puts down 555hp with the boost controller off, tires just rip thru all the gears...im sure even your 400hp ITR did the same hahahah
KR inspire said:
Wow those drop hard. I have JIC's FLTA2's and I'm almost all th way (minus like 5 turns) and I don't think I will look that low when I put my wheels on. I have an itch to be as low as I can without causing too much damage. :biggrin:
BTW, what do you do for SP?
SP engineering rocks, I went to the garage sale and got a work emotion cf kai 18x8.5 rim for $50!KR inspire said:
- Joined
- 19 November 2002
- Messages
- 633
KR inspire said:
Since you work at SP....are you willing to hook up a fellow NSX driver?! :biggrin: ......say please, please.
I'm willing to help out anyone that needs it, especially forum members...anyone needs anything feel free to give me a call @ (626) 333-5398 and ask for Hugh...Just keep in mind we (SP ENGINEERING) does not sponsor this forum so I would not like to take away from those that do...so any help on anything I feel its best to call.
Similar threads
