Search results

Got the new motors in. Been looking for a DIY on the process of replacing the motors. Do you or anyone else know of a DIY or any other instructions on the process of replacing the motors? The comments above in this thread are pretty vague. Thanks!

So I recently got 2 new condenser fan motors in from Japan. I didn't have the time to do your rebuild. Do you happen to have a link or info on the process of replacing the fan motors please? Been searching but haven't found a DIY for just replacing these motors. Thanks!

It's been so long since the AC worked I honestly don't remember. I recently fixed the AC except I need a new condenser fan for it, but I'm trying to get the rest of the kinks worked out while I'm waiting on the condenser fan motor. It does blow some out of the center now, but is definitely weak...

I have the I's Impact Gauge mount above the center panel in my 1991 NSX. The air from my HVAC isn't blowing out too hard because I don't have the OEM DUct piece that connects it. My car had the NavPod when I bought it, but I switched to the I's impact because I wanted to use the gauges after I...

Will these fit a 1991? Thanks

So I need to remove the center speaker from my rear interior part. I found some threads and also the instructions in the 1991 Servman Service Manual. It says to "Remove 4 Screws" Mine does not have 4 screws. THere's 4 holes, but no screws. My center panel is all black, including the plastic...

I do plan on offering my motors in the FS part. My passenger side was working fine, but I'm just going to replace both motors with new OEM ones. Got them on Ebay from a Japan seller. They had 5 in stock already!

Thank you for the reply and the link. Unfortunately, I'm in a bit of time constraint with moving away from Hawaii, so I'm probably just going to replace them with new ones.

Sorry to resurrect an old thread. My driver's side AC fan motor is going out. Is it the same part number for both the passenger and driver's side? 80151-SL0-A01? Would you go ahead and replace both motors if you was me? Thanks,

My drivier's side fan motor is going bad. Have to hit it to turn it on. Found some threads about it, but have a question about the part number. Does anyone know if 80151-SL0-A01 is the same motor/part number for both sides? Also, would anyone suggest if they would replace both sides since I'm...

You have no idea the pain and frustration of Honolulu traffic brother. It's terrible. We are rated as the worst traffic in America, worse than LA, NYC, etc. An our roads are also rates as the worst in the country. It's literally dangerous to drive on many of the major roads with nice rims. They...

Thank you everyone. I'm thinking the Wrench is probably the best choice. I need an Oil Filter to measure it. Does anyone know if the oil filter is bigger than 4 1/2" in Diameter? There's 2 wrench sizes. One is up to 4 1/2" and the other is up to 5 1/2". It's a tight space, so I figured to not...

I'm looking to buy an Oil Filter Wrench. I've found the OEM Part number 07AAA-PAAA100 Doing some looking on Amazon, Ebay, etc. Some have this listed as a "68MM Oil Filter Wrench" and some have it listed as a "65MM" Does anyone know if it's a 68MM or 65MM for our cars? I ask because I live in...

Hey, did you ever sell this? Thanks

Ouch! That's an expensive little bugger. Definitely going to try and find a used one here on Prime. Thanks for the info!

I'm trying to locate the part numbers for the AC/Heat Vents in the drivers door. By this I mean the point at which the air flows out of the door. There's 2 vents that the air flow direction can be adjusted. I need to replace one in my drivers side. Please see attached image. Sorry for the...

Yes this is an OLD thread, but I'm trying to get my Compressor to work. I don't think it's bad, so before I go out and buy one, does anyone know where the Fuse/Relay is for the AC COmpressor itself? I have a 91 with a converted R32 AC System, and I charged the freon, so I know it's got enough...

Yes this is an OLD thread, but I'm trying to get my Compressor to work. I don't think it's bad, so before I go out and buy one, does anyone know where the Fuse/Relay is for the AC COmpressor itself? I have a 91 with a converted R32 AC System, and I charged the freon, so I know it's got enough...

So my AC compressor is not working. I think it may be the relay or fuse. I haven't found it in the Service Manual. Anyone know where/which relay and fuse I should check? Any other suggestions? Thanks,

Hi, is the diffuser Carbon Fiber? Is it painted? Thank you,

I currently have 3 AEM Gauges in the center mount. What I don't like about my current gauge mount is it deleted the AC vents under there. So, all of my AC is just blowing behind my dash and the air is wasting away. I need to get my AC blowing in the car again. I have 2 questions please. 1...

I need to get my ID2000 fuel injectors cleaned in my 1991 NSX. Yes they're huge injectors, but need them for my setup. They're basically new, but the car has not been started in 18 months due to a entire engine rebuild. I've been looking online and found INjector RX at www.injectorrx.com...

So I cannot use the Clevite/Chevy bearings. The Brian Crower crankshaft uses the same pin size as OEM, and the Clevite/Chevy bearings require a larger pin size. However, I did speak for about 30 minutes to Brian Crower himself. He was VERY informative and helpful. He has had zero issues using...

Me too. After talking to my mechanic and also Cody Loveland, I doubt this will happen, but I'm going to try and find out today. Thanks!

So I just talked to SHad at Driving Ambition. He was very helpful and informative. He explained how he uses the Chevy bearings. I'm not quite sure I can do this with my setup, but I'm definitely going to try!