Window regulator upgrade kits

[ofdlt10]

hey hugo,
mine arrived today. what a beautiful yet simple piece of engineering. why didn't acura think of this? as soon as i finish my a/c install, i'm starting on these. i'll let you know how they work. can't wait.

thanks again,
rog

 

[ChopsJazz]

Just finished mine. They work great!

 

[kiteboarder]

Payment sent for one set today. Thanks

Sean

 

[Hugabuga]

Thank you, I will post it tomorrow! :biggrin: You have PM for the tracking number

 

[MikeC_587]

I added myself to the list.

Thanks for solving the NSX window issue.

Let me know, if I'm not too late to get into the Window regulator upgrade kit group buy?

Thanks,

Mike

1. ChopsJazz
2. nsxinkl
3. OLDMNSX
4. SMYLDOC
5. ediddynsx for two sets-payment sent 5/20/10
6. ryan1926
7. ChadAtlanta
8. UnhuZ
9. Shawn110975 for two sets-payment sent 5/21/10
10. 96cxt
11. ediddnsx
12. angus
13. Chris_NSX
14. Gred@R-Tuned
15. CDX_NSX
16. Ponyboy
17. ryan1926
18. scotchtzd
19. MetalSpikeRacing
20. I1O101I
21. Fastraxturbo
22. Frank Spano
23. dablackgoku1234
24. kennyc
25. warrenw
26. greenberet
27. GUNDAN323
28. Rando
29. vf2ss
30. 94brooklandsc
31. DDozier
32. kelly's nsx
33. bikenut
34. huntjames
35. grnsx
36. ofdlt10
37. owali
38. NSX-Appeal
39. Vikas
40. NSXBRO2
41. Russian007
42. Sandman1962
43. liftnot
44. T-Ram
45. Zishan
46. michl_moto
47. Lipper
48. NMYMIRR
49. jorligan
50. lithiumus
51. RichM
52. nsxinohio
53. YTRY
54. EK4 hatchback
55. Sduffass
56. Myaddiction
57. Truckadsjoe
58. Honcho
59. soloracer951
60. drnsx
61. redrocket
62. NSX2398
63. Acura NsX Pilot
64. Nick675
65. MikeC_587

 

[Hugabuga]

MikeC_587: you have PM!


I still have available kits for immediate shipping, just PM me if you need one.
There is no need to add yourself to the list anymore.

Thank you

 

[YTRY]

Hugo,

My kit arrived today, nice stuff! I'll wait for the paper instructions beore I install :smile:

Thanks

Michael

 

[ediddynsx]

Have not received mines yet


RC517350239PT
2010/06/11
16:47
Item received
[+]Info [-]Info



2º Send Schedule: Interval:

Date
Hour
Status
Reason
Place
Receiver

2010/06/11
16:47
INTERNATIONAL RECEPTION
-
LISBOA
-

2010/06/06
21:31
INTERNATIONAL DISPATCH
-
ISC NEW YORK JFK
-

2010/05/25
14:15
INTERNATIONAL DISPATCH
-
LISBOA
-

2010/05/24
16:53
ACCEPTANCE BY THE POST SERVICES
-
ALCABIDECHE
-


Does this mean that it was in JFK and then back to Lisboa again?

 

[Hugabuga]

I do not see another reason than a wrong address! You have PM to verify it.
Why would it be sent back to me??

 

[ediddynsx]

pm replied thank u....will be waiting for it to get here.

 

[baynsac]

Can I also add my self to this Group buy and please let me know how much and paypal address to send it to. Thanks



1. ChopsJazz
2. nsxinkl
3. OLDMNSX
4. SMYLDOC
5. ediddynsx for two sets-payment sent 5/20/10
6. ryan1926
7. ChadAtlanta
8. UnhuZ
9. Shawn110975 for two sets-payment sent 5/21/10
10. 96cxt
11. ediddnsx
12. angus
13. Chris_NSX
14. Gred@R-Tuned
15. CDX_NSX
16. Ponyboy
17. ryan1926
18. scotchtzd
19. MetalSpikeRacing
20. I1O101I
21. Fastraxturbo
22. Frank Spano
23. dablackgoku1234
24. kennyc
25. warrenw
26. greenberet
27. GUNDAN323
28. Rando
29. vf2ss
30. 94brooklandsc
31. DDozier
32. kelly's nsx
33. bikenut
34. huntjames
35. grnsx
36. ofdlt10
37. owali
38. NSX-Appeal
39. Vikas
40. NSXBRO2
41. Russian007
42. Sandman1962
43. liftnot
44. T-Ram
45. Zishan
46. michl_moto
47. Lipper
48. NMYMIRR
49. jorligan
50. lithiumus
51. RichM
52. nsxinohio
53. YTRY
54. EK4 hatchback
55. Sduffass
56. Myaddiction
57. Truckadsjoe
58. Honcho
59. soloracer951
60. drnsx
61. redrocket
62. NSX2398
63. Acura NsX Pilot
64. Nick675
65. MikeC_587
66. BaynSac

 

[angus]

Payment Sent , thanks Hugo!!!

 

[roondogg]

Please send me a PM regarding availability and payment information.

 

[Hugabuga]

roondogg: you have PM!
Yes I still have available kits ready to go :biggrin:

 

[Coz]

Re: Window regulators upgrade

Incredible work Hugo, absolutely incredible.

This is by far one of the best fixes and upgrades I have ever seen anyone do for a never ending problem...
You did an incredible amount of research and develop to make this happen and that my friend is to be appreciated and respected.

Pay Paling you now.

Thank you.

 

[Hugabuga]

PDF Instructions for the Window Regulator Kit are finally ready! :biggrin:

Any doubt feel free to ask. I am willing to modify or correct them if needed of course!
Hope they are of any help!
Thank you
Hugo

 

[angus]

So again , I will ask - if I have new regulators with no wear , can I install the pulley without disassembling the motor?

 

[silvermullet]

Hugabuga,

i'd like to get this kit as well. please PM me payment amount and paypal address.

its summertime and i need my windows working well!

Thanks!

 

[Hugabuga]

silvermullet: you have PM!

angus: that is be impossible because the pulley is located about 5mm lower than the plastic guide to avoid it from touching the regulator lever in the full opened window position.
So you "need" twice these extra few mm of cable (=10mm) and for that you need to open the motor and readjust the cable length.

You could relocate the pulley higher if you remove its "T-shaped" washer, but then you won't be able to fully open the window for about 5mm and the regulator lever would touch the pulley and use it as a "bumpstop"...but in that case, yes it could be done without opening the motor as cable length would remain the same...

 

[REDNSXT]

Hi Hugo,
Payment just sent. Thanks and great job!

 

[deylo]

Hi Hugo,
Payment just sent. How long i must wait for the Kit?
Can you tell me via eMAIL: [email protected]
The PM for this Forum is closed!

Best Regards
Eric from Switzerland

 

[Hugabuga]

Hi Eric, email sent!
Package sent the 11th, takes about 5 days so you should get it tomorrow
Tacking number: RC474631685PT

2010/06/15 14:35 RECEPÇÃO INTERNACIONAL ZURICH 1

2010/06/15 08:00 EXPEDIÇÃO INTERNACIONAL LISBOA

2010/06/11 12:55 ACEITAÇÃO AEROPORTO (LISBOA)



Thank you
Hugo

 

[YTRY]

I upgraded my driver side window regulator but having some real difficulty with the reinstall.
The problem I'm having is getting the two bolts at the top of the regulator on the window guide rght below the window back in, I cant get my hands in far enough to find and see the bolt holes. Any help or tips would be greatly appreciated.


Thanks
Michael

 

[Hugabuga]

Hi Michael!
-Make sure regulator is not at its fully upper position when you fit it back in the door!. When you took it out, its position was determined by the upper window stops and not the maximum height of the regulator like the one you used to pre-load the rotary spring before closing the motor
-Do not tight the 4 regulator bolts before fitting these 2, this will help you to adjust the regulator until you reach the bolt holes.
-One of the 2 screw has in fact more room to fit there your hand or a tool. You can put there just 1 screw, tight it securely, remove the tapes and lower the window until you can reach the 2nd screw as described in the NSX manual.

Hope this was of any help!
Cheers
Hugo

 

[FastraxTurbo]

There is an access hole in the lower part of the door that makes it easier to reinstall the bolt for the window. Lower the regulator to line up with the hole. Lower the window by hand and insert the right bolt first. This is easiest as you can access it from the large opening. Use a short extension and secure the other bolt through the smaller hole.