What is the Darn Part number?

shawn110975

Suspended
Joined
15 July 2009
Messages
7,726
Location
Arizona
Guys need some help.

there is this little rubber gasket that fits on the upper
front bumper, one on both sides. mine were old and
falling apart so I ripped them off.
went to the dealer to get the part and it
is not listed.
I included a parts pic where it goes.

the part covers the gap were the upper
bumper meets
the front fender. I was going to cut one
outta rubber but would like to buy the OEM.

I am thinking it might actually connect to part 47
but am not sure as I ripped off the original

I am sure someone has had to replace it here on prime.
thanks in advance


picture.php
 
Last edited:
So does that mean I have to buy part 17?
as it comes with this rubber thing?
 
Shawn, did you ever get the right part #? If not I've had good dealings with Clint Howell at an Acura dealer that gives us Primers 25% off. He's helped me with looking up difficult part numbers. If you want his number - here it is: Also there is another - Tim - but I do not have his contact info. Hope this helps.

CLINT HOWELL
PARTS MANAGER
11550 S. VIRGINIA STREET
RENO, NEVADA 89511
DIRECT: 775-229-7720
PARTS: 775-229-7779
FAX:775-229-7792
EMAIL: [email protected]
PARTS WEBSITE: WWW.DISCOUNTACURAPARTS.COM
EBAY : http://stores.shop.ebay.com/ACURA-OF-RENO
NSXPRIME VENDOR NAME: ALLNSXPARTS
"YOUR #1 SOURCE FOR ALL THINGS ACURA!!!"
 
Shawn, did you ever get the right part #? If not I've had good dealings with Clint Howell at an Acura dealer that gives us Primers 25% off. He's helped me with looking up difficult part numbers. If you want his number - here it is: Also there is another - Tim - but I do not have his contact info. Hope this helps.

CLINT HOWELL
PARTS MANAGER
11550 S. VIRGINIA STREET
RENO, NEVADA 89511
DIRECT: 775-229-7720
PARTS: 775-229-7779
FAX:775-229-7792
EMAIL: [email protected]
PARTS WEBSITE: WWW.DISCOUNTACURAPARTS.COM
EBAY : http://stores.shop.ebay.com/ACURA-OF-RENO
NSXPRIME VENDOR NAME: ALLNSXPARTS
"YOUR #1 SOURCE FOR ALL THINGS ACURA!!!"

Call Clint. He and his staff are very responsive and customer focused.
 
JACKOK

you did it thats what i need. but since i ripped them out I didnt know what they went to.

but what is the actual part i need

71155-SLO-000 Frame COMP R front bumper
\5880
71156-SLO-000 Frame COMP L front bumper
\5880
71160-SLO-000 Plate R reception desk bumper side upper
\2362
71165-SLO-000 Plate L reception desk bumper side upper
\2362

picture.php
 
Last edited:
If you sent that picture to a good pars man he'd figure it out for you - but don't do that - that would be too easy.
 
The part #'s are; 71160-SLO-000 Plate Right reception desk bumper side upper
\2362
71165-SLO-000 Plate Left reception desk bumper side upper
\2362
This part is a soft metal, around .030 thick, pressed formed and
the seal folds over the plate.
Also, from your IPC
017 71160-SL0-000 PLATE, R. FR. BUMPER SIDE (UPPER) 1 1991 NSX 41.53 31.15
020 71165-SL0-000 PLATE, L. FR. BUMPER SIDE (UPPER) 1 1991 NSX 41.53 31.15
 
Last edited:
Back
Top