Quick Teaser Pic of our switch install. Pardon the dust as I didn't get a chance to clean the interior after the install.
A very crappy video from my P&S camera...but you get the point.
http://www.youtube.com/watch?v=ecxhy9D5jD8
Can you set the adjustment for how high you want it to go?
Hi, you have momentary rocker switches in the kit. The system will continue to raise the car, as long as you are depressing the lift side of switch, until the travel of the cup is maxed out. The same applies to lowering the car, as long as you are depressing the dump side of the switch the system will lower the car until you reach the set ride height.
Thanks:smile:
Ravi
I just had my VRH kit installed yesterday, and I am simply blown away. The craftsmanship on the kit is amazing. The techs that installed the kit praised the kit and said they had never seen anything like it.
What was most surprising about the kit is how fast the car rises. I think it takes about two seconds to rise, and about two seconds to come back down. It's also amazing how fast the tank recharges.
With the kit installed, I was able to slam my car down as low as I always wanted without having to worry about scraping everywhere.
I highly recommend to all NSX owners with coilovers.
I will post pics this weekend.
Im wondering how many inches max it goes up. If button gets stuck going up or down, is there any damage? Is the pic on the site version one or the newer version?
Hi Kelley:smile:, to answer your questions:
The max up travel depends on the coilover the VRH kit is used with, for example Tein RA gets nearly 3.5" lift due to the long uncompressed length of the coilover body. Tein FLEX gets approx 2" of lift max.
If a button gets stuck it would simply lift or lower the car until the system is in the max high or low setting, no damage can occur. For normal operation, you depress the desired side of the rocker switch until the system has reached max up or down position, or anywhere in between.
The pic on my site is V2, I haven't had time to do formal photographs of V3 yet.
Thanks
Ravi
thanks man, those were the answers i needed. looking forward to getting the version 2 kit. i need it.