trans swap???

[s2 killer]

i just got a 6spd trans.. and am putting it in my 91. any input??? easy or hard??

 

[Miner]

It is easy if you can turn a wrench and have read up on the conversion. Hard if you haven't. The biggest obstacle is the 6 speed is not compatible with the original dual disk clutch on a 91. Following the Tech Manual is straightforward. The Science of Speed sells the necessary parts to manage the reverse lockout.

Miner

 

[MJK]

Not hard, but you might want to stick to the 5 speed at that power level. JDM short gears should get you the same zip down low as a 6 speed.

 

[s2 killer]

i have a exedy twin-disc highpo clutch for the 5spd would it be able to change over to the 6spd? and where can i find the info on converting it?

 

[Miner]

i have a exedy twin-disc highpo clutch for the 5spd would it be able to change over to the 6spd? and where can i find the info on converting it?

It won't work w/out mods to the 6 speed. Science of Speed has info on it, and I belive there is a thread on the DIY section on what is involved.

Miner

 

[Chris NSX]

i have a exedy twin-disc highpo clutch for the 5spd would it be able to change over to the 6spd? and where can i find the info on converting it?

You need Honda NA2 NSX-R Input Shaft, it will require you to open the transmission and swap out the 6 speed main shaft.

 

[Miner]

You need Honda NA2 NSX-R Input Shaft, it will require you to open the transmission and swap out the 6 speed main shaft.

A simple project...:wink: