When I was trying to find what it would take to get the Spoon monoblocks to fit our NSX's, I couldnt find any installation info. I hope this helps someone.
The calipers are the Spoon monoblock 45020-MBF-GOO (Accord type R/TSX). The brake pads I used were RSX type S. S2000 pads will work (I was told). Not sure if AP1 or AP2 apply. The brake pad needed to be modified slightly (pad clip needed to be removed). My car is a 99 so my factory rotors work fine.
The dust shield had to be modified for the mounting bracket
Installation is pretty easy.
My wheels ( Dazz Matiz ) needed a 5mm spacer to clear the caliper.
The calipers are the Spoon monoblock 45020-MBF-GOO (Accord type R/TSX). The brake pads I used were RSX type S. S2000 pads will work (I was told). Not sure if AP1 or AP2 apply. The brake pad needed to be modified slightly (pad clip needed to be removed). My car is a 99 so my factory rotors work fine.
The dust shield had to be modified for the mounting bracket
Installation is pretty easy.
My wheels ( Dazz Matiz ) needed a 5mm spacer to clear the caliper.
Last edited: