SOS Composite Center Console

[ScienceofSpeed]

Also, how do you mount the AEM gauges? Thre is nothing for them to mount to?

The same way that they mount to any console (or our in-console mounting plate sold here) Gauges include a bracket which is threaded to the back side of the gauge that secures the gauge to the mounting suface as shown here:
http://www.aemelectronics.com/images/30-8444-back.jpg

cheers,
-- Chris

 

[ScienceofSpeed]

The boot and coin tray are secured with epoxy or silicone adhesive (only a very small amount is required). This actually works really well. We've looked into glassing in metal brackets, however, the result has not been satisfactory.

-- Chris

 

[saiteiman]

can I order with double-din cut-out? Of course I will provide cut-out dimension.

 

[ScienceofSpeed]

I'm sorry, we're not current offering to cut out the console as we recommend following the instructions with the console that tells you how to determine measurements with the stereo installed and console in hand.

 

[Ko-nsx]

i bought the first version console in 2009. Will you be pre-cutting for the pioneer f90bt console again?

 

[NSX-ADV5]

How do you mount the shift boot and coin tray???I know this might sound bad but if you know how to work/used poxy glue all you have to do is line the shift boot and coin tray in place and used poxy glue and glue it.Its not really that hard guys.Took me 10min to get mine glued in place.Hope this help...:smile: