This is the used Comptech/Brembo Indy 12.4” front kit that will fit under OEM 16” and 17” wheels. The hats are designed with a build in 20mm hub centric spacer to clear 94+ factory wheels.
Brembo racing “Indy” aluminum billet caliper x2. These calipers are 4-pistons in 38/40mm. The original finish was rough so I had them refinished in red body with black letter and rebuilt with new seals by PMBperformance.com (best in the business).
CT caliper mounting brackets (used) x2
12.4” (315mm x 28mm) Brembo slotted rotor rings (used, but still have a lot of life in it at 27.8/28mm) x2
12.4” cross drilled rotor rings (too worn to use, but good as a template for colemanracing.com to make replacements $160 fixed or $245 floating per rotor) x2
CT aluminum hats (used) x2
Goodridge stainless steel brained brake lines (used) (you could purchase Stoptech 950.40001 is a direct replacement if desired) x2
Mounting hardware.
I can provide you with reference info for the brake pad shape by brand.
For brake bias reference figures:
Front CT/Brembo 315mm / Rear OEM 91-96 (42.5mm piston) 282mm = 64.7%
Front CT/Brembo 315mm Fr / Rear OEM 97-05 (48mm) 303mm = 56.8%
Front CT/Brembo 315mm Fr / Rear OEM 91-96 (42.5mm) w/ 303mm rotor when using a 97-05 caliper bracket = 62.7%
OEM 91-96 = 61.6%
OEM 97-05 = 54.0%
Stoptech Fr & Rr ST40 = 62.4%
Message me for additional pictures.
Price: $2,500 obo shipped to lower 48 states.
Brembo racing “Indy” aluminum billet caliper x2. These calipers are 4-pistons in 38/40mm. The original finish was rough so I had them refinished in red body with black letter and rebuilt with new seals by PMBperformance.com (best in the business).
CT caliper mounting brackets (used) x2
12.4” (315mm x 28mm) Brembo slotted rotor rings (used, but still have a lot of life in it at 27.8/28mm) x2
12.4” cross drilled rotor rings (too worn to use, but good as a template for colemanracing.com to make replacements $160 fixed or $245 floating per rotor) x2
CT aluminum hats (used) x2
Goodridge stainless steel brained brake lines (used) (you could purchase Stoptech 950.40001 is a direct replacement if desired) x2
Mounting hardware.
I can provide you with reference info for the brake pad shape by brand.
For brake bias reference figures:
Front CT/Brembo 315mm / Rear OEM 91-96 (42.5mm piston) 282mm = 64.7%
Front CT/Brembo 315mm Fr / Rear OEM 97-05 (48mm) 303mm = 56.8%
Front CT/Brembo 315mm Fr / Rear OEM 91-96 (42.5mm) w/ 303mm rotor when using a 97-05 caliper bracket = 62.7%
OEM 91-96 = 61.6%
OEM 97-05 = 54.0%
Stoptech Fr & Rr ST40 = 62.4%
Message me for additional pictures.
Price: $2,500 obo shipped to lower 48 states.
Last edited:
