So, what mods did you do this year? And which have you planned?

Season '07:
Gruppe M intake system.
Downforce engine cover.
Downforce RWG.
JDM NSX-R pedals.
JDM NSX-R manifold cover and plate.
GT-One/Sorcery R-GT rear bumper.
GT-One F1 sound exhaust v5.1.
GT-One oil cap.
Partial paint job and front bumper modification. (After pics)
Goodyear Eagle F1 GS-D3 tires.
PIAA fog bulbs.

So far for season '08:
Procar Specials Carbon B-pillars.
 
last 3 months:
GTLW
Prospeed ecu
Topspeed headers
Work emotions cr kai
Shark antenna
HIDS

next yr:
who knows.
 
I guess i did very little.....but i did something few have done.

Finally beefed up the nsx's Automatic Transmission with the Level 10 stage 3 Tranny. Also put on a stage 3 torque converter as well as a 500 RPM stall. It puts the power to the wheels so much better then stock. Finally feels like the supercharger is getting the job done.
 
Had the nsx for 2 months > Tint, Teins, 18/19 HREs, and GT-one F1 v5.1 exh.

Still to be installed: Daves SS

2008 plans: NONE. Currently loving the set up and will leave it be :smile:
 
Hi All,

What mods installed this year 2007:

VIS Type R CF hood
Flowmaster exhaust with RSR tips
Foglights
Radar detector direct to fuse box
Quick release steering wheel (Momo) with billet mount
Fan for stereo amp located in the trunk, kicks out when it gets hot
Meshed my engine cover- less than 1/2 the weight of OEM
Installed magnetic oil drain bolt
Installed shift light
Bought an electric jack- trashed the OEM jack
Modified my K/N filter setup- has funnel directed to DF CF snorkel
Installed Acura emblem in center taillight- nixed the script

Yet to be installed in 2008:

Koni adjustables with H&R springs
Prospeed ECU
97+ modified headers
AC compressor
LED lights- See Comtec write up
GT style CF rear spoiler
Trade or sell my 18-19 SSR SP1's for 17-18 set up, wheels ?
Valve adjustment
Earl's stainless steel braided brake line and new brake pads
Paint brake calipers- 2 tone
Diffuser- similar to DF
Under body panel in front to aid with CF hood
Lambo doors- I know most here on prime hates this, it's a must for me

It will be hard not to drive the NSX fo 2-3 months while doing all this work, but worth it in the end. Most work will be done by yours truly.

Future endeavors:

Rebuild top end- cam, valves, match porting
Big mouth throttle body
CTSC
Wide body kit- rear fender, bumper, and skirts only
2 tone paint job
Carbon fiber trunk

Happy holidays to all on prime and thanks for all your help with issues regarding the NSX

Galvani aka GAR123:cool:
 
1.Custom 1 of kind Margahill bumper. fixed popups with oem headlight thru bumper.
2. Replace drivers front fender
3. Remove front turnsignals, weld, paint
4.Downforce rear carbon garnish
5.Remove door keyholes, weld, paint
6.Buy paint install Mike "Bikevil type r gt500 one of kind alum. hood
7.Buy Install D2 coilovers
8.Remove D2's and have custom made airsuspension with remote and digital control in ashtrey.
9.Install 2007 Corvette mirrors.
10.Install test pipes
11. Have 5speed trans built by titanium Dave w/ type R gears and shorties
12. Install new clutch
13.Install Titanium Daves short shifter with SOS short throw.
14. Install SOS alum ball shift knob
15.Install Vinneys Margahill sideskirts.
16. Install polished stainless mesh in all openings
17. Install ultrasuede headliner and windshield posts
18. Install suede visors to match
19. Install Recaro leather pole positon seats with SOS sliders
20. Install JDM tailights
21.Install MOMO jetfighter steering wheel with SOS Alum billet hub
22. Install Wingwest rear spats
23. Remove wingwest spats and install Margahill spats
24. Remove replace a/c control unit, relocate to armrest console
25. Remove All exterior emblems acura/NSX etc...
26. Installed custom painted carbon fiber comptech rear spoiler.
27. Installed HP evo hyper silver with stainless lip 18/19 with BFG KDWs
28. Remove windshield wipers
29. Repaint front half of car with mods.
30. Install HID headlights/kit

Well thats all I can think of at the moment. Next year widebody and possibly Turbo.maybe wheels If I can find style I like better.
 
2007 mods to my NSX

-02 OEM bumpers
-02 OEM front lip
-Downforce CF NSX-R Hood
-Downforce CF NSX-R wing
-Stacy Side Skirts
-Brembo GT big brakes with E brakes (Fronts and Rear)
-Clear Corner led headlights
-Clear Corner led side markers
-Dali NSX-R Radiator Duct
-OEM HID
-NSX-R lower front bumper tray
-NSX-R Front Battery Undertray
-2002 Taillights
-NSX-R Center Tail Light
-NSX-R OEM H badges
-NSX-R Coolant Bottle Cover
-NSX-R door Emblem
-NSX-R mesh shift boot
-NSX-R Titanium Shift Knob
-NSX-R Prop rod
-NSX-R horn Button with trim ring
-MOMO steering wheel
-NRG hub & quick release
-CF Engine cover
-Tein RE coilovers
-Work Emotion CR
-Work lug nuts
-SOS Steering Rack Urethane Bushing
-SOS Adjustable Anti-Sway Bars
-NSX-R Lower Chassis Reinforcement Bar
-NSX-R Upper Chassis Reinforcement Bar
-SOS NSX-R Chassis Bar Spacer Kit
-Comptech lockout kit
-6 Speed transmission
-NSX-R Main twin disc shaft
-NSX-R 4.23 for 6 speed
-5 speed diff with a higher preload
-Tilton Lighten Flywheel 7.8 lbs
-SOS twin disc clutch
-GT One ABS upgrade wiring harness
-Switch interior with 98 NSX (looks new)
-04 door trim insert
-Odyssey 680 battery
-Dali Billet battery mount

for 2008

-DF CF rear window garnish
-Mode4 CF rear diffuser
-Clearcorner LED taillight conversion
-Kevlar Recaro Seats
-17/18 Volk 28N
-PROCAR TEIN RE spring conversion kit for 60mm ERS springs
-New Tires (RA1)
-00+ ABS pump unit
-Non Compliance Rear Beam
-Non Compliance Toe Links
-Non Compliance Front Pivot Clamp Kit
-Comptech 3.5 Stroker Kit
 
Last edited:
What came on:
Hi-Boost Charge w/ AEM.
-Walbro Fuel Pump, 1000C injectors, titanium valve and retainers etc....
-Engine oil analysis wear indicates that it may have gone a full rebuild in it's life; cool..engine runs strong.
18/19 HRE 547R
CT Sway
Tein w/ EDFC.
Ricey heavy stereo.
O2 Conversion + R Hood & Wing.

What I did:
Installed Accusump system + oil breather kit.
Removed A/C system + threw a whole bunch of other parts out..
Installed Type R chasis bars.
Installed Recaro PP's.
Installed TitaniumDaves harness bar.
Type R boot + R CF knob.
Custom Double DIN center console + RIO EMPEG MP3player.

What I plan/hope to do next year:
Aero work:
Install Hood duct.
Install Trunk Lip.
Install undertray.
Reliability:
New TitaniumDave's radiator + thermostat + coolant tank + coolant hoses.
Install RPS Clutch.
Tranny/syncho rebuild. Not necessarily needed, but sinec have the tranny out...

Interior:
Actually put it back together..


Wish List:
Swap Whipple for Aerorotor + Aftercooler to get to 400+RWHP safely (~372ish)
Be < 2900 LBS without going more spartan than it already is.
 
Been an easy year on my wallet:biggrin:, actually not really:redface: just spent it else where.

What I did in 2007:
02+ tail lights
NSX-R shift boot and carbon fiber shift knob
Gruppe M Intake
2005 NSX oem wheels powder coated in white
bought NSX a little brother

Planned for 2008~2010:
None
Buy a new brother for NSX

Wish list:
Lightweight seats
Project U oem size two piece light weight rotors
Big ass wing with deck spoiler
Volk CE28N like the one I had before but with correct offset
Falken RT615 Tires
Drop into 26xxlbs
GT-One F1 Sound exhaust
Titanium test pipe
6spd tranny or short gears
brand spanking new oem clutch with lightweight flywheels
 
Jetpilot3 said:
What have I done this year?

New A/C Compressor
New Main Relay
New set of WORK wheels
New Taitec GT Lightweight exhaust

2008:
Full Downforce +02 conversion
Click to expand...

I'm looking to get the same exhaust. Would it be possible to hear your exhaust ? Don't know if you live in Washington, if not maybe an audio file?

Thanks
Chris from Tacoma
 
got car in march, since have added

1. jdm color matched front "H" emblem
2. removed "ACURA" from center lense and added a big honda "H" emblem
3. DF rear nsx-r spoiler
4. taitec exhaust
5. powdercoated 97 wheels
6. painted calipers red
7. added USA*SPEC to listen to my zune (removed cd changer)
8. integra type r titanium shift knob
9. modded front turn signals with leds and painted red

2008
maybe prospeed chip
jdm dark taillights
fix stock bose amps
hids
better intake
better brakes
lower car
and what ever else pops up

late future
supercharger
 
I buying OEM wipers mine looks old and it should increase my horsepower and aerodynamics top speed should go up 2-3 mph :)
 
I am impressed over all this mods & ideas.
I put on a set of Bilsteins, Route Ks front lip, big ass wing of unknown brand, opened the OEM intake, service

Next year will bring Type R replica rear spats&diffuser, Type R hood, AIS and if there is any money left, a set of new wheels in 17&18 combo. Maybe some minor paint&upgradde in the engine bay as I am satisfied with the exterior.
 
I1O101I said:
U should go BEANER STYLE twin blade wipers the will give u 5 hp!!

Might even be able to get it in red to match ur car.

Bryan
Click to expand...

Maybe some 20's with spinners with my wipers i would be rarer haahhaha :)
 
2007:
6 speed conversion
JDM lights, nose badge, wheel caps
02+ white wheels
a whole lot of preventative maintenance

2008:
Sell white wheels, replace with Type-S rims
a whole lot of preventative maintenance
would like to find a CTSC
would like to find type-S seats
 
07 Was a bad year for me but all is well for the year 08.

from Jan07 till Oct07

New Black Interior Carpet
ZE forged Shifter
New Tires
JIC magic coilovers
replaced Engine hatch struts
Sorcery wide rear quarter panels Modified
Repaint PPG Berlina Black
Custom gas cap
Modified marga hills side skirts
HID's
New Battery LOL
DF Carbon Fiber lower interior cowl
DF Carbon FiberInterior garnish
DF Carbon Fiber A-pillars
DF Side intake scoop
ARCIntake


For the year 2008

Upgrade license plate
Install window fix it thingies
Fix the slow driver side window
Fix all the faults from 07 body mods
Sorcery Ver 2 front fenders and bumper
02+ headlight upgrade
factory oem hood or DF CF type R Hood
Misc Carbonfiber work from Umbrella Auto designs
Possibly a double din monitor set?
Custom rear spats or rear valence do over from scratch
New Wheels?
Upgraded brakes?
Repaint berlina black
forced induction with a motor build and EMS
Umbrella Auto Designs Air cup suspension
Alcantera Headliner, inner B pillars in Black
New Seats?
Uprade steering wheels with quick release

Buy new toy for the stable =)

For now:biggrin:
 
Last edited:
Not all were mods in 2007:
Replaced all electronics including wiring (car has been flooded).
Replaced engine/transmission.
New leathers for seats
Cantrell headers, ARK DT-X exhaust & matched the catalytic conv. to the larger headers/exhaust.
Modded the enginebay wiringloom for the O2 sensors (no extra connectors).


2008 in process / ordered:
HID low beams for pop-up lights
Clifford alarm system
Type-R stabilizer and chassis bars
Short gears
2002 Type-S suspension coilover set
New audio/navigation system, amplifier, speakers & subwoofer
And finally evict that (dead) spider which took the window seat in my left taillight.:biggrin:


Biggest "mod" for me in 2008 will be:
Get the car up and running (Sorry MvM, I've been telling this story to you and myself for almost a year now :redface: )

Roger
 
2007
Gruppe N gear shift knob
DownForce CF license plate bezel.
LED lights inside and out
NOS bottle heater
Momo steering wheel
SOS wheel adapter
Leatherseats.com seat covers
HID lights
JDM fog lights
Zanardi mats

Maintenance
Tie rods, rebuilt HKS struts, GoodYear F1 GS-D3 tires, oil changes, grease window tracks and an alignment.
 
2007
Lovefab turbo
Complete maintenance & inspection

2008
2002 Front end and rear end conversion
Racing clutch
iPod connection for radio
Clear Bra
 
Last edited:
2007
Bought NSX in October
DF Intake scoop
Changed "Acura" emblem in back to read "NSX"

2008 Plans:
Audio/Navigation upgrades
HIDs
Tint
Bilsteins
Shift knob

Wish list/Future:
Some HREs or Volk GT-Vs on the cheap
ARK DT-S/X exhaust
 

Similar threads

Nukem
1991 NSX Clutch Replacement and Other Projects
Replies
5
Views
205
Nukem
Nukem
vra4anin
Automatic Transmission problem - won't change gears, CEL code ERROR 15
2
Replies
28
Views
547
vra4anin
vra4anin
Daytonat
1991 Blk/Blk with service records
Replies
9
Views
688
Ab461300
A
Remi
NSX-R Hood Duct FRP -SOLD!!
Replies
6
Views
587
Remi
Remi
ArloNSX
The trials and tribulations of 0266
Replies
8
Views
389
ArloNSX
ArloNSX
Back
Top