omega, is your car lowered? wow that lip is low for a car that doesn't look lowered.. 
-
***AVOID MARKETPLACE SCAMS!!***
Scammers are using compromised Prime member accounts to pose as a trusted seller in the marketplace. Before you enter into a deal with any seller, follow these tips to keep yourself safe. If you encounter one of these scammers, please report them immediately and we will lock their account.
Caveat Emptor!
Shine Auto Project: Kei Office Style Front Half Bumper
- Thread starter ShineAutoProject
- Start date
- Status
Can you please measure your front wheel wheel height.
My stock'r is 25" to the red paint, not the plastic liner.
Thanks
Trev
My stock'r is 25" to the red paint, not the plastic liner.
Thanks
Trev
- Joined
- 10 November 2005
- Messages
- 23
Thanks Omega for the pics. Looks good. I think his pictures will help answer most of the questions.
Please send me freight to
business at
8128 McIntyre Road
Edmonton, Alberta, Canada
t6e5c4
Also pics of unit loose off of car would help, front, back, side.
Thanks
Trev
business at
8128 McIntyre Road
Edmonton, Alberta, Canada
t6e5c4
Also pics of unit loose off of car would help, front, back, side.
Thanks
Trev
Nice! Almost looks like that of NSX-R GT front bumper.
And in a way looks least safer from rubbing the floor too.
Now only if I could be less careful of rubbing the floor when lowered as most of NSX owners do. :smile:
And in a way looks least safer from rubbing the floor too.
Now only if I could be less careful of rubbing the floor when lowered as most of NSX owners do. :smile:
Who really cares if they don't want to sell it.
Why bother starting a thread.
Trev
Why bother starting a thread.
Trev
- Joined
- 10 November 2005
- Messages
- 23
Shipping to Canada is quite expensive. Its $200 from Fed ex, but you dont have to worry about any extra duties or taxes.
I might have a shipment going to Edmonton ,so if you're willing to participate and save on shipping, let me know.
Ken
Ken
Well, it then depends on what your shipping to Edmonton.
Will it fit in the same box or what?
Be weird for two cars to have the same front in our town.
That is a business address I gave you.
Do you have some pics of the piece off the car, and from behind.
Is it an easy install once painted.
Do you have a website?
Do you have an address and phone and fax numbers.
Do you take mastercard?
Do you take bank transfers.
Thanks
Trev
Well, it then depends on what your shipping to Edmonton.
Will it fit in the same box or what?
Be weird for two cars to have the same front in our town.
That is a business address I gave you.
Do you have some pics of the piece off the car, and from behind.
Is it an easy install once painted.
Do you have a website?
Do you have an address and phone and fax numbers.
Do you take mastercard?
Do you take bank transfers.
Thanks
Trev
This front cover looks a LOT like my OEM one plus the WW front lip.
Very good looking product.
Very good looking product.
- Joined
- 10 November 2005
- Messages
- 23
We organize combined shipments to various locations for our customers to save on shipping because we can ship 10 bodykits in one box going to one location in Canada for $250. Its a steal when the quantity is high. The other gentleman is interested in the 350z parts, not NSX parts.
We have a website, but it is under construction.
www.shineautoproject.com
I can post more pictures.
Regarding installation, it is as easy as installing your OEM piece.
Our contact number is 909 980 3433
Our email is [email protected] Our paypal is the same.
Ken
We have a website, but it is under construction.
www.shineautoproject.com
I can post more pictures.
Regarding installation, it is as easy as installing your OEM piece.
Our contact number is 909 980 3433
Our email is [email protected] Our paypal is the same.
Ken
- Joined
- 10 November 2005
- Messages
- 23
Looks real nice and easy.
Do you feel there will be much finishing required on the part before painting or do you feel that they leave your facility read to prime and paint.
Will you take a bank transfer?
I have US funds in a separate bank account ready to transfer to US suppliers. I bought this money when Cdn was close to par.
To use paypal will kill me and increase my Canadian cost amount.
When will you know if the other guy wants to split the freight or what ever deal.
Thanks so much.
Trev
Do you feel there will be much finishing required on the part before painting or do you feel that they leave your facility read to prime and paint.
Will you take a bank transfer?
I have US funds in a separate bank account ready to transfer to US suppliers. I bought this money when Cdn was close to par.
To use paypal will kill me and increase my Canadian cost amount.
When will you know if the other guy wants to split the freight or what ever deal.
Thanks so much.
Trev
- Joined
- 10 November 2005
- Messages
- 23
Hey there,
What is your email? I will send you the bank info as well as give you info on the combined shipping.
Ken
What is your email? I will send you the bank info as well as give you info on the combined shipping.
Ken
Any additional pictures from customers who have purchased the Shine Auto Front Half Bumper Spoiler. Also, does anyone have different measurements from the center and corners that was stated in one of the postings. I have my car lowered 1.25" and have 18" front wheels, so I would like at least 3" in the center as the lowest area off of the ground.
Ok, Interetested in this again.
Can you PM me the cost of 2 of these with combined shipping to Toronto?
Thanks
John
Can you PM me the cost of 2 of these with combined shipping to Toronto?
Thanks
John
Has anyone who's got this already confirm that it has the same shape underneath as the oem nose? I have the NA1 NSXR flat undertray and alum panel by DF and want to keep using it with this kit.
John
John
Bump!
Is it still possible to buy this thing? I might have 3 people who will share shipping costs to Canada!
Holla back!!!!
Is it still possible to buy this thing? I might have 3 people who will share shipping costs to Canada!
Holla back!!!!
- Joined
- 10 November 2005
- Messages
- 23
Hey guys...
Pmd!
Pmd!
Did anyone get one of these and if so how is it and pics?
Trev in Edmonton Alberta Canada, now considering again.
Trev
Trev in Edmonton Alberta Canada, now considering again.
Trev
I have been trying to get ahold of the ppl at Shine for a week now and am being ignored....
I would NOT advise anyone to purchase this part. The info in the oringinal post about how this is the "new version" that has had the fitment issues worked out is completely FALSE
I bought one of these expecting it to be a basic paint and install job. The body shop called and said there were fitment issues. Once I got there and saw the pathetic fitment I was, to be honest, not surprised. I had seen this before in other posts about the original Shine lower valance. The sides didnt reach far enough back and the lip looks disgusting !! I am now stuck with either paying the shop for what they have done already and going back to stock or paying an additional $500 to have it custom fitted (basically cut it up and stick abunch of fiberglass together to make it fit)
I sent a pm about a week ago to Shine and have not heard anything back, my guess is that I wont either
Trev, my advice is DONT DO IT!
Just my $.02
Marc
(ShineAutoProject can chime in anytime to defend or deny any of this...)
I would NOT advise anyone to purchase this part. The info in the oringinal post about how this is the "new version" that has had the fitment issues worked out is completely FALSE
I bought one of these expecting it to be a basic paint and install job. The body shop called and said there were fitment issues. Once I got there and saw the pathetic fitment I was, to be honest, not surprised. I had seen this before in other posts about the original Shine lower valance. The sides didnt reach far enough back and the lip looks disgusting !! I am now stuck with either paying the shop for what they have done already and going back to stock or paying an additional $500 to have it custom fitted (basically cut it up and stick abunch of fiberglass together to make it fit)
I sent a pm about a week ago to Shine and have not heard anything back, my guess is that I wont either
Trev, my advice is DONT DO IT!
Just my $.02
Marc
(ShineAutoProject can chime in anytime to defend or deny any of this...)
Science of Speed was going to sell the Shine Front Half Bumper but dropped it after the fitment issues.
I have been trying to get ahold of the ppl at Shine for a week now and am being ignored....
I would NOT advise anyone to purchase this part. The info in the oringinal post about how this is the "new version" that has had the fitment issues worked out is completely FALSE
I bought one of these expecting it to be a basic paint and install job. The body shop called and said there were fitment issues. Once I got there and saw the pathetic fitment I was, to be honest, not surprised. I had seen this before in other posts about the original Shine lower valance. The sides didnt reach far enough back and the lip looks disgusting !! I am now stuck with either paying the shop for what they have done already and going back to stock or paying an additional $500 to have it custom fitted (basically cut it up and stick abunch of fiberglass together to make it fit)
I sent a pm about a week ago to Shine and have not heard anything back, my guess is that I wont either
Trev, my advice is DONT DO IT!
Just my $.02
Marc
(ShineAutoProject can chime in anytime to defend or deny any of this...)
Good God.
I was the organizer of the Canadian GB and was surprised when Marc PM'd me over this. Great, now I have a useless hunk of frp sitting in the basement.
I'd be curious to see if Shine will reply to this thread.
Wow, and I was going to buy that piece of junk from you!!!!
lol
Trev
lol
Trev
- Status
Similar threads
