Does anyone know if the headlight outline on the 02+ hood match with the 91-2000 style bumper? As in are they the same width and match up, is what I am asking.
correct, '02+ headlight lines don't match '91-'01 headlight lines.Ok so the 02 hood headlight lines does not match the 91 style bumper? Cause I'm not trying to do a 02 coversion, just use the 02 bumper on the early 90 style without the 02 headllights or 02 bumper.
Ok so the 02 hood headlight lines does not match the 91 style bumper? Cause I'm not trying to do a 02 coversion, just use the 02 bumper on the early 90 style without the 02 headllights or 02 bumper.
The hood does not line up with the headlights, the fenders or the front bumper as far as I know. You cannot mix and match 02+ with older parts.
NSXEXY said:the 02 hood has that curve and the 91 is more of a square, but is it possible that if you were to cut the 02 hood just like the 91 for the headlights, would it work?
N Spec said:Ok so the 02 hood headlight lines does not match the 91 style bumper? Cause I'm not trying to do a 02 coversion, just use the 02 bumper on the early 90 style without the 02 headllights or 02 bumper.
Do a search for the '02 conversion and you will find a list of all the parts needed.
Here is a list of a conversion from Downforce.
And here is the page listing Science of Speed's conversions.
If I'm not mistaken, this is a pretty good list of the items:
60100-SL0-A91ZZ HOOD 1 2002 NSX
71140-SL0-010 FRAME, FR. BUMPER CENTER (UPPER)
71111-SL0-000ZZ SKIRT, FR. BUMPER
71110-SL0-010 SPOILER, FR. AIR
04711-SL0-A91ZZ FACE, FR. BUMPER
33101-SL0-A04 HEADLIGHT UNIT, R. (HID)
33151-SL0-A04 HEADLIGHT UNIT, L. (HID)
33126-SL0-A01 COVER, RUBBER TIMES 2
33146-SL0-A01 GASKET, SEAL (2)TIMES 2
33145-SL0-A01 GASKET, SEAL (1) TIMES 2
33127-SL0-A01 COVER (1) TIMES 2
33119-S6M-003 CONTROL UNIT
33129-S5A-J01 IGNITER, HID
HTH
so would $4558 be a fair price for OEM hood, both headlights and upper and lower front cover?
what i think the OP is asking is about the line where the hood and front bumper get together...
picture this: we have a 91 NSX without headlights... we change the 91 bumper with a 02+ one... do the bumper and hood get together, or the 2 don't get along?? again, with no headlights in place
Does anyone know if the headlight outline on the 02+ hood match with the 91-2000 style bumper? As in are they the same width and match up, is what I am asking.
Would I need one ignitor/control for each headlight?
Also, since the headlight switch would normally activate the flip up motors, would the wiring need to be modified to accomodate the HID?
Since I have the HID kits that Steve sells on here, can I reuse them? The HID are only for the low beams so would I need HID bulbs for the high beams or would I just use my same setup on those also?
Would I need one ignitor/control for each headlight?
Also, since the headlight switch would normally activate the flip up motors, would the wiring need to be modified to accomodate the HID?
Since I have the HID kits that Steve sells on here, can I reuse them? The HID are only for the low beams so would I need HID bulbs for the high beams or would I just use my same setup on those also?
Downforce made a wiring harness for the light conversion. Might be an idea to drop DF or SOS an email, they might be able to help with the harness. I had this harness- 3 wire cut from the flip-up headlights and connect to the 'new' harness. Then plug to 02 OEM HID(in my case) and that's it. HTH
Does anyone know if the headlight outline on the 02+ hood match with the 91-2000 style bumper? As in are they the same width and match up, is what I am asking.
My old setup
My new setup
Haha how many questions do you get about that "A" symbol on the NSX nose in Brunei?? I bet even the Honda enthusiasts do a double take and scratch their heads!