Pics of stock engine

Joined
16 June 2002
Messages
9,960
Location
Jacksonville
I need to get a pic of a stock engine on the right side. Ideally the shot of the 'little square guy' and the long skinny wiring harness cover. Mine was removed when BBSC was installed and now that it isn't there anymore the OEM's don't fit. I need to get a good close up pic of them so I can see how to route the wires to make them fit again.
Thanks to whomever can help.
 
I think he is wanting a picture of the cover that is over the front valve cover that goes over the O2 and A/C wires running down under the plastic cover, also the square cover that fits at the top of the long cover on the front valve cover that covers up the bolts holding the throttle cable bracket and harness bolt on the alternater mount.
 
92NSX,
I suggest that you also look into replacing any missing metal cable clamps. I am referring to the metal clamps that secure the large wire bundles (about 1 inch diameter). They are located under the fuse box on the left side of the engine, and also on the right side of the engine near the alternater. They were missing on my NSX after I removed the BBSC.
 
BryanZublin said:
92NSX,
I suggest that you also look into replacing any missing metal cable clamps. I am referring to the metal clamps that secure the large wire bundles (about 1 inch diameter). They are located under the fuse box on the left side of the engine, and also on the right side of the engine near the alternater. They were missing on my NSX after I removed the BBSC.
Thanks for the tip. I will check into them also.;)
Oh the things I'm finding out now.
 
This area?

This area?

faeed0cf.jpg


These wires?

faf0db21.jpg


faeecc16.jpg
 
Last edited:
NSX REY),
The top pic is great. Now if only I could talk you into one more were the wires run up thru the front cam cover going toward the alternator. ;)
Thanks again though, they are a BIG help.
 
Nice Camera. What are you using to take those?
 
Back
Top