Finally, a sensible way to get your check engine light off on your OBDII NSX with bypass pipes!
I have been developing a fix for this issue for quite some time and have finally had the time to post some up for sale. I have been developing O2 sensor eliminators for over the last 8 years for all different types of cars. I am an electrical engineer by trade and have as a hobby developed these for every car I’ve owned. I have been testing the set for the NSX for over 1500 miles and they work like a charm.
The details are very simple, these are full electronic simulators for the OBDII NSX O2 sensors. These will give the NSX’s ECU working codes for the catalytic converters. These in no way effect any other system on the NSX. These simulators truly emulate a working catalytic converter and will NOT effect the check engine light if another problem with the car comes up. These will not damage anything on the car and install is very easy. These simulators attach to the rear O2 sensors on each set of pipes. The simulator is 100% electronic. Full detailed instructions are included and install is very straight forward. These eliminators fit all NSX models 95-05.
Also if you have to do DEQ inspections and they only test your OBDII port, it will read all clear to the testing machine and you will pass.....:wink: But these are for off road use only.:tongue:
I have also developed a system of catalytic converter replacement pipes which work very well with these O2 eliminators. These are designed very differently then most pipes on the market and are designed as a direct replacement for OEM cats. These use all OEM exhaust gaskets for a perfect fit. These are also very light and lightweight was the major focus of the design. These don’t use the hangers as I found they are not needed on these due to how light they are. The OEM cats weigh in at 20.5 pounds. These only weigh 5.5 pounds, total, for both pipes!
The replacement pipes fit models 95-99 and are made with the finest stainless steel material and are silver ceramic coated for maximum heat dissipation and protection.
If you decide to remove the bypass pipes you can still leave the O2 sensor eliminators on the car as they will still tell the car the cats are working. I also still have a bypass pipe and electric O2 simulator for the Honda S2000 which I developed a few years back but lost interest in selling after selling my personal S2000. IM me if interested in the S2000 model.
The price for the bypass pipes for 95-99 NSX’s with both O2 eliminators are only $280.
The price for just the O2 eliminators for 95-05 NSX’s is $130.
I only have 10 sets for sale at this time. I will listen to all trade options as well.
PM me or email me at [email protected]
Thanks and happy motoring!
I have been developing a fix for this issue for quite some time and have finally had the time to post some up for sale. I have been developing O2 sensor eliminators for over the last 8 years for all different types of cars. I am an electrical engineer by trade and have as a hobby developed these for every car I’ve owned. I have been testing the set for the NSX for over 1500 miles and they work like a charm.
The details are very simple, these are full electronic simulators for the OBDII NSX O2 sensors. These will give the NSX’s ECU working codes for the catalytic converters. These in no way effect any other system on the NSX. These simulators truly emulate a working catalytic converter and will NOT effect the check engine light if another problem with the car comes up. These will not damage anything on the car and install is very easy. These simulators attach to the rear O2 sensors on each set of pipes. The simulator is 100% electronic. Full detailed instructions are included and install is very straight forward. These eliminators fit all NSX models 95-05.
Also if you have to do DEQ inspections and they only test your OBDII port, it will read all clear to the testing machine and you will pass.....:wink: But these are for off road use only.:tongue:
I have also developed a system of catalytic converter replacement pipes which work very well with these O2 eliminators. These are designed very differently then most pipes on the market and are designed as a direct replacement for OEM cats. These use all OEM exhaust gaskets for a perfect fit. These are also very light and lightweight was the major focus of the design. These don’t use the hangers as I found they are not needed on these due to how light they are. The OEM cats weigh in at 20.5 pounds. These only weigh 5.5 pounds, total, for both pipes!
The replacement pipes fit models 95-99 and are made with the finest stainless steel material and are silver ceramic coated for maximum heat dissipation and protection.
If you decide to remove the bypass pipes you can still leave the O2 sensor eliminators on the car as they will still tell the car the cats are working. I also still have a bypass pipe and electric O2 simulator for the Honda S2000 which I developed a few years back but lost interest in selling after selling my personal S2000. IM me if interested in the S2000 model.
The price for the bypass pipes for 95-99 NSX’s with both O2 eliminators are only $280.
The price for just the O2 eliminators for 95-05 NSX’s is $130.
I only have 10 sets for sale at this time. I will listen to all trade options as well.
PM me or email me at [email protected]
Thanks and happy motoring!