No blinker function at all????

Joined
30 August 2012
Messages
349
Location
Summerville sc
Hey guys, I wanted to ask if anyone had any ideas about helping me with my blinker issue. When I put my signal on nothing happens on the cluster or the outside blinkers. Any ideas what I can check would be great. Thanks
 
could be a bad blinker relay. does your hazard works? if not most likely linked to the relay. if you can hear the click then it might be something else. Turn signal fuse is also a viable option which should be 10 amp Turn Signal/Cruise/Backup Light Fuse in the driver's kick panel fuse box
 
I had an issue with the blinkers not canceling. They worked but didnt cancel. I know yours dont work at all but I just thought it may be related somehow or give some insight. On my 97 there was a blinker cancel module that had a contact switch and a black electrical box. Located in the steering column. I tried to clean it, and finally decided the electronics were bad. I replaced it and it worked.

At the same time I was having the A/C control fixed by e repair. I sent the blinker switch in with it and he looked at it and fixed it. I never installed it, but he said some capacitor or something was bad. Maybe, its possible for this to completely knock out the blinkers. Doubtful, but I thought I would share the info. Best of luck. I would listen to others first as they are way smarter than me with the NSX!
 
Back
Top