New Products from ScienceofSpeed (January 4, 06)

[ScienceofSpeed]

We're excited to offer several new products we've been working on:

ScienceofSpeed Aftermarket Stereo Panel
http://www.scienceofspeed.com/produ...nce_products/NSX/ScienceofSpeed/stereo_panel/
>>> Allows installation of aftermarket single-DIN stereos with the factory center console.

Honda JDM Map Bag
http://www.ScienceofSpeed.com/products/interior_performance_products/NSX/Honda/JDM_map_bag

Extended Thread Gear Shift Lever
http://www.scienceofspeed.com/products/interior_performance_products/NSX/NSX-R_shift_knobs/
Shift lever is a direct replacement for factory gear shift lever. Lever length is decreased by approximately 10mm while available threads are twice as long. Lever allows shift knobs such as the NA2 NSX-R shift knob to be installed along with the jam nut to set clocking of the gear shift pattern.

Cantrell Concepts Carbon Fiber Door Trim
http://www.scienceofspeed.com/produ...roducts/NSX/Cantrell_Concepts/door_sill_trim/

ScienceofSpeed Stereo Delete Panel
http://www.scienceofspeed.com/produ...ducts/NSX/ScienceofSpeed/stereo_delete_plate/

NSX-R Chassis Bar Spacer Kit for 1991-1996 NSX
http://www.ScienceofSpeed.com/produ...oducts/NSX/ScienceofSpeed/chassis_bar_spacers

Cheers,
-- Chris

 

[orbusrex]

Chris, great looking products. Like the map bag and the door sills...

One thing, the photos on the map bag link and aftermarket single din stereo panel are very hard to see. The map bag especially...

Just lettin' you know,

Rob

 

[ScienceofSpeed]

hi Rob -- Good points. We'll upload some new photos as soon as we get the opportunity to take better shots.

Cheers,
-- Chris

 

[goldNSX]

I like the map bag and the door sills too.
Question to the Stereo Delete panels: The Europe versions have some switches next to the handbrake lever the US-version doesn't have. Do you have a pic of that area?
Is the NSX-R Chassis Bar Spacer Kit for 1991-1996 NSX needed if I'm installing the Type-R Chassis Bar AND Type-R Sway-bar?

 

[Veleno]

How much of the center console needs to be trimmed? Can you provide pictures of the back of your stereo panel, as well as a trimmed oem center console?

Thanks

 

[racerex]

chris, count me in on the map bag set.......bill

 

[MJK]

Can the map bad be mounted on either side, or just behind the US driver seat? Sorry if this has already been covered.

 

[|Adeel]

Hi

I am wondering if you guys are stopping to sell this http://www.scienceofspeed.com/products/interior_performance_products/NSX/center_console/ ? Because you have a new adapter for aftermarket headunits now (the one that is new) AND you used to have several options on the center console which I linked above, there is only one option left on your website



Thanks.

 

[ScienceofSpeed]

I like the map bag and the door sills too.
Question to the Stereo Delete panels: The Europe versions have some switches next to the handbrake lever the US-version doesn't have. Do you have a pic of that area?
Is the NSX-R Chassis Bar Spacer Kit for 1991-1996 NSX needed if I'm installing the Type-R Chassis Bar AND Type-R Sway-bar?

hi Thomas -- I'll send you an e-mail regarding your order.

Are you talking about these switches?
http://www.scienceofspeed.com/products/interior_performance_products/NSX/Honda/switch_panel/

No, you do not need the spacer kit for the NSX-R bars / stab bar. This is only for aftermarket sway bars 22mm or larger (SoS, Comptech, Dali, Etc.)

Cheers,
-- Chris

 

[ScienceofSpeed]

How much of the center console needs to be trimmed? Can you provide pictures of the back of your stereo panel, as well as a trimmed oem center console?

Thanks

Trimming requirements are minimal. They can be seen through the single-DIN cut out in this picture:
http://www.ScienceofSpeed.com/public/stereoplatecutout.jpg

Cheers,
-- Chris

 

[ScienceofSpeed]

Sorry, we are currently not offering the composite center consoles as they are backordered while we seek a new manufacture.

Cheers,
-- Chris

Hi

I am wondering if you guys are stopping to sell this http://www.scienceofspeed.com/products/interior_performance_products/NSX/center_console/ ? Because you have a new adapter for aftermarket headunits now (the one that is new) AND you used to have several options on the center console which I linked above, there is only one option left on your website

Thanks.

 

[ScienceofSpeed]

Can the map bad be mounted on either side, or just behind the US driver seat? Sorry if this has already been covered.

Yes, it can be. However, the mounting has to be modified.

We'll post a write up once this is tried.

Cheers,
-- Chris

 

[Veleno]

So it's similar an overlay?
What is it made out of?
Are all styles in stock ready to ship?
Thanks

 

[kreh]

ARe the map holder and bag leather?

 

[ScienceofSpeed]

So it's similar an overlay?
What is it made out of?
Are all styles in stock ready to ship?
Thanks

Yes, these panels are attached to the top of the center console. The carbon model is genuine 2x2 carbon fiber. Both the black gelcoat and carbon model have a vinyl top layer that gives the piece a finished radius design. The matt black panel is also plastic that is designed to be sanded and painted. We have all three models in stock ready to ship.

Cheers,
-- Chris

 

[ScienceofSpeed]

ARe the map holder and bag leather?

They appear to be vinyl - the same type of material that covers the existing interior panels.

Cheers,
-- Chris