-
***AVOID MARKETPLACE SCAMS!!***
Scammers are using compromised Prime member accounts to pose as a trusted seller in the marketplace. Before you enter into a deal with any seller, follow these tips to keep yourself safe. If you encounter one of these scammers, please report them immediately and we will lock their account.
Caveat Emptor!
Introduce New NA1 Non-Pop up headlight conversion like NA2
- Thread starter wilgtr
- Start date
I'll bet unless you change the bumper, you'll have to have a 'big lump'.
The bumper cutout for the headlights on the 91 to 01 is shallower than the cutout on the 02+. :tongue:
As Jeff said MH is out of production.
Also I dont like the hump on the 02 front end headlight that is what is keeping me from doing the 02 conversion. If there is a flushed headlight with those HID projectors then I will be jumping on board. Been waiting for someone to make on like that with great quality and fitment.
The 02 hump is tolerable for me but the conversion price is not. I also would be on board with a flush mount setup, but would like it to be of NSX quality. I still like the Taitec/Raybrig flush mounts but they are not sealed.As Jeff said MH is out of production.
Also I dont like the hump on the 02 front end headlight that is what is keeping me from doing the 02 conversion. If there is a flushed headlight with those HID projectors then I will be jumping on board. Been waiting for someone to make on like that with clean quality.
As Jeff said MH is out of production.
Also I dont like the hump on the 02 front end headlight that is what is keeping me from doing the 02 conversion. If there is a flushed headlight with those HID projectors then I will be jumping on board. Been waiting for someone to make on like that with great quality and fitment.
My bad. I apologize for saying that as it was not very polite.
The fit and finish of the marga hills headlights are crap, if you were _that_ interested in scoring a set they come up used all the time, and usually sell for an inexpensive amount.
These headlights have potential, but the angel eyes give off a 'cheap headlight' vibe, and the 'hump' needs to be reduced considerably - perhaps you could streamline the entire assembly by blending it into the front bumper, as revolution did with their version 2 fixed headlights.
These headlights have potential, but the angel eyes give off a 'cheap headlight' vibe, and the 'hump' needs to be reduced considerably - perhaps you could streamline the entire assembly by blending it into the front bumper, as revolution did with their version 2 fixed headlights.
Maybe if you remove the angel/halo rings, you can reduce the hump. I'm sure the diameter of the projectors would be less than with the "rings". Setting the projectors as low as possible in the "bucket" would also reduce the hump. Of course the light pattern would be cut off by the bumper, but a set of driving/aux lamps under the bumper would help with that.
I agree.
I replaced the headlights on my wife's 94 Integra last year and other than OEM all I could find were the lights with the 'angel eyes'. I thought I would like the look of them but once installed they did come across looking rather 'Pep Boy's-ish'.
--------------------------------------------------------------------As Jeff said MH is out of production.
Also I dont like the hump on the 02 front end headlight that is what is keeping me from doing the 02 conversion. If there is a flushed headlight with those HID projectors then I will be jumping on board. Been waiting for someone to make on like that with great quality and fitment.
I love the hump..without that its will NOT look right...02 have hump
LOL, makes you wonder how much the seller knows about the NSX. Seems like just another company trying to make a quick buck.
Isn't ABS Dynamics sort of a "generic" bodykit company? Like VIS, Ground Designs, etc, etc.
None the less, I don't think the design is all that appealing. Front shot doesn't look all that bad, but the side shot says the headlight profile is way too high or too much bulge. Thats almost the height of the pre 02 headlights when they are raised from the closed position. I also think they should be available with or without the halo rings. I personally don't like them (the rings). And I don't think they are worth that price coming from a company like ABS Dynamics either. $500 maybe, but not $1900.
BTW, looking at your email addy, I think it might be incorrect.
In case anyone is trying to order a pair, looks like the email is misspelled.
Another vote for no rings for less cliff...
Another vote for no rings for less cliff...
We are working on down sizing the hump and making it more aerodynamic. The quality of this headlight is better than the other conversion kit that other company sell. We are not over pricing this headlight to all nsx owner. We have spend a lot of time and money on this new item. ABS Dynamics usually do aerodynamic kit for all Japan vehicle. I know headlight is not our strong specialty but we will try hard to develop good part to people that wants it. Thank you guys for your interest on this headlight.
This is good to hear, as my two suggestions for this product would be to:
1. Reduce the hump, preferably down to about the hump size of the OEM 2002+ lights.
2. Leave out the Halo rings.
That would result in a product I've been dreaming of for some time :wink:
Here is a thread with current fixed-headlight offerings for the nsx:
http://www.nsxprime.com/forums/showthread.php?t=92577
http://www.nsxprime.com/forums/showthread.php?t=92577
Last edited:
Yes i knew it! You should all be ashamed.LOL:biggrin:
- Joined
- 18 April 2006
- Messages
- 177
I LIKE IT!!!!!! The Halo's are cool. I don't really mind the hump too much. Great product, great initiative!
The hump by the looks of it can be "re-molded", i'm sure it wouldn't be too tought, take a peek at the NA2 and follow it's sillouette.
I know which FRONT BUMPER would go well with these lights! LOL
The hump by the looks of it can be "re-molded", i'm sure it wouldn't be too tought, take a peek at the NA2 and follow it's sillouette.
I know which FRONT BUMPER would go well with these lights! LOL
I'd like these headlights on my 93, if they were a modification of the popups which flipped 180 degrees like the 84-whatever corvettes. I would like them to look something like your picture (clear shield not nearly as pronounced) when they are in the "up" position, but want them hidden exactly as the stock popups are in the "down" position.
bja
bja
Very Nice!:biggrin:
I'm sure that hump can be brought down to fit more snug with the light housing right
However, I'm not really in the market for this....I dunno...I like my pop ups:tongue:
I'm sure that hump can be brought down to fit more snug with the light housing right
However, I'm not really in the market for this....I dunno...I like my pop ups:tongue:
As Jeff said MH is out of production.
Well, as many of you have pointed out and discussed the Marga Hills headlights are not produced any longer, BUT MARGA HILLS SOLD THE MOLDS...
So guess who has the original MARGA HILLS molds?
If anyone's interested in trying to make their own set(s) or want them for mass reproduction send me an offer. Or maybe the company producing these new lights want them for prototype usage... Anyhow, let me know if anyone's interested.
Brandon
[email protected]
(573)528-7929 cell
No worries bud.....I don't let things bother me too easily. :smile:
Anyways back on topic that is what I am looking for....I want something sealed, oem fitment, good quality of parts, flushed with HID projectors. So thats it if you can make one I will take a set. But just to let you know I think you are on the right track. Keep up the good work and maybe the price can be better. :biggrin:
Well, as many of you have pointed out and discussed the Marga Hills headlights are not produced any longer, BUT MARGA HILLS SOLD THE MOLDS...
So guess who has the original MARGA HILLS molds?
If anyone's interested in trying to make their own set(s) or want them for mass reproduction send me an offer. Or maybe the company producing these new lights want them for prototype usage... Anyhow, let me know if anyone's interested.
Brandon
[email protected]
(573)528-7929 cell
I wouldnt know how to make my own set......also I would want to see one of these in person installed.
Some better pics of the Marga Hills:
Similar threads
- Locked
- Locked