Larry.
Come on down and bring a few of your NSX friends from the Sacramento Chapter. Besides, when was the last time you really stretch the legs of your NSX?
Mike
Hugabuga visit to San Francisco in October
- Thread starter MikeC_587
- Start date
Larry.
Come on down and bring a few of your NSX friends from the Sacramento Chapter. Besides, when was the last time you really stretch the legs of your NSX?
Mike
Huga installed my kit and this is a MUST HAVE.
BTW, he loves Viet cafe shops. They dun have too many asians where he resides.......
BTW, he loves Viet cafe shops. They dun have too many asians where he resides.......
Sup Mike!
Unfortunately the date conflicts with my shedule, otherwise I'd be there in a heart beat...
But I trust you to drive my car to Hugo to fix my POS windows.
Larry,
Glad to see you back! Are you ready to buy my NSX? I'll try to come up your way before the holidays and we can grab some food with Nalesh et all.
I think Hugo might be available on Monday October 3rd, send a message to Hugo to see if he would be willing to go up your way. You would need at least three NSX's and a place to do the upgrade.
Mike
NSXAMG996TT: I can go to sacramento on Monday Oct 3
BATMANs: Bring us your Viet friends to the party to cheers us all up:biggrin::biggrin:
See you all very soon now
BATMANs: Bring us your Viet friends to the party to cheers us all up:biggrin::biggrin:
See you all very soon now
I'm starting a Sacramento list. We will need a place to do this. Any ideas?
1. NSXAMG996TT (Larry)
2. nsx20014me (Tom)
3.
4.
5.
I'm starting a Sacramento list. We will need a place to do this. Any ideas?
1. NSXAMG996TT (Larry)
2. nsx20014me (Tom)
3. calnsxn (Don W.)
4.
5.
1. NSXAMG996TT (Larry)
2. nsx20014me (Tom)
3. calnsxn (Don W.)
4.
5.
Hi Guys,
You can use my shop for the Sac installs, If you would like. I just need to know what day. Cheers, Shad
You can use my shop for the Sac installs, If you would like. I just need to know what day. Cheers, Shad
Shad,
Thanks for the offer. The date is Oct 3rd Monday. I'm setting up the list but have not contacted Hugabuga or Mike to confirm the Sacramento visit.
Tom
Thanks for the offer. The date is Oct 3rd Monday. I'm setting up the list but have not contacted Hugabuga or Mike to confirm the Sacramento visit.
Tom
Hi Tom,
You don't need confirmation from me, but you should contact HugaBuga.
BTW, Hugo your mail box is full.
Mike
Am I too late? Would like the full $400 deal as I'm not that handy when it comes to trim stuff.
I confirm the Sacramento visit on Oct 3 :wink:
What time is the 10-2 Sunday SF meet and fix
Count me in IMDUCATI (ted) for both windows
Count me in IMDUCATI (ted) for both windows
Do you need directions to Shad's? What time will you be up there?
Hi Mike,
Thanks for setting up the SF event with Hugo for 10/02.
I have a couple of questions on this before committing ...looks like Hugo's inbox may be full so hoping you can answer them, or perhaps he can respond to this thread.
Thanks for setting up the SF event with Hugo for 10/02.
I have a couple of questions on this before committing ...looks like Hugo's inbox may be full so hoping you can answer them, or perhaps he can respond to this thread.
- What time is the event planning to start?
- Do we know approximately how long it will take to do the upgrade? I realize this will vary depending on individual preference to work on one's own car but ballpark would be really helpful so those of us with kids, wives, significant others, can plan the day accordingly.
I'm pretty sure that Hugo will have kits available for purchase. But, Hugo should answer this question.
Thanks,
Mike
NSXnR6: I have enough kits for everyone, you can purchase it on site yes
I have all the necessary tools with me to work on the regulators, just bring your philips screwdriver if you are removing the door panels yourelves
Installation takes 1hr30 for the full job, or 1hr if you remove the door panels.
See you all very soon, I am at NSXPO right now
I have all the necessary tools with me to work on the regulators, just bring your philips screwdriver if you are removing the door panels yourelves
Installation takes 1hr30 for the full job, or 1hr if you remove the door panels.
See you all very soon, I am at NSXPO right now
Thank you for clarification. Looking forward to this.
1. MikeC
2. WashabiS2K (Brian)
3. d.n (David)
4. carmar(Nat)
5. Dhalsim (Roger)
6. racer-ex (Bill)
7. 8kallday (Chris)
8. sidwac (Andrew)
9. torafugu (Ben)
10.
1. MikeC
2. WashabiS2K (Brian)
3. d.n (David)
4. carmar(Nat)
5. Dhalsim (Roger)
6. racer-ex (Bill)
7. 8kallday (Chris)
8. sidwac (Andrew)
9. torafugu (Ben)
10.
Updated - SF
1. MikeC
2. WashabiS2K (Brian)
3. d.n (David)
4. carmar(Nat)
5. Dhalsim (Roger)
6. racer-ex (Bill)
7. 8kallday (Chris)
8. sidwac (Andrew)
9. torafugu (Ben)
10. imducati (ted)
1. MikeC
2. WashabiS2K (Brian)
3. d.n (David)
4. carmar(Nat)
5. Dhalsim (Roger)
6. racer-ex (Bill)
7. 8kallday (Chris)
8. sidwac (Andrew)
9. torafugu (Ben)
10. imducati (ted)
Mike, I think there should be a planned poker game while people wait
Steven
Steven, that sounds like a great idea. C'mon down and take the lead with logitics, since you do a really great job for your event
Similar threads
- Sticky
