how to: turn signals

[night_ryder]

Didn't know exactly where to post but..
i have a turn signal light out and can't find out how to remove the turn signal. is there hidden bolts or do i have to take off the whole bumper to replace the bulb? thanks in advance to all that contributes.

 

[Synthesis]

check the service manual.... they show where the screw is to loosen the light... (the screw doesn't come out of the assembly, just loosens) then you just pry one of the sides to pull it out.

http://nsxprime.com/FAQ/Reference/1991_svcman/1991_svcman.htm

page 23-191, or 1177 of the .pdf file

 

[Synthesis]

oh, and i suggest you lay down and look up into the hole in the bumper.... shine a light in there, that's the only way you'll really be able to see the screw.

 

[OzzieJohn]

Lying flat on the ground I was able to run my hand up between the bumper and the radiator to find the screw by feel and then guide the screwdriver to it. Prior to that I spent 15 minutes trying to find the sucker with a torch without success, which seems crazy as it's only a few inches away but it's a bit awkward. This is with a Marga Hills bumper but there's very little difference so hopefully this helps.

Is it just me or does the procedure for changing an indicator bulb seem to have strange sexual undertones??