GT-C question
- Thread starter fkong777
- Start date
http://www.nsxprime.com/forums/showthread.php?t=41163
I messaged him asking about the front wheels and the spacers he ran. But to answer your question YES you will need spacers in the front. He's running 10mm or 15mm spacers up front, and I have relatively the same size wheel w/offset coming to me from Mackin (soon I hope) so I'm also going to have to run a spacer up front. But I'm going to try to see if a 3mm or 5mm will do the job because anything bigger than that should require longer wheel studs.
The rears, you won't have any problems and won't need any spacers.
I messaged him asking about the front wheels and the spacers he ran. But to answer your question YES you will need spacers in the front. He's running 10mm or 15mm spacers up front, and I have relatively the same size wheel w/offset coming to me from Mackin (soon I hope) so I'm also going to have to run a spacer up front. But I'm going to try to see if a 3mm or 5mm will do the job because anything bigger than that should require longer wheel studs.
The rears, you won't have any problems and won't need any spacers.
fkong777 said:
does it come with 18 x 10 1/2 or 10 with +45 offset?
I realize my post has absolutely no contributive value, but GT-C's are AWSOME! 
I kind of like them also. 
Thanks! 225/35 and 275/30 The fronts are +42 and the rears are +37fkong777 said:
I have GT-C's in 17X8 and 18X10 WITH a Wilwood BBK. No spacers required.
KGP said:
I'd sure like to see calipers like that under my Volks. sniff, sniff
TitaniumVtec said:I'd sure like to see calipers like that under my Volks. sniff, sniff
Stoptech's...
Last edited:
Sure you want to paint the disc brake?fkong777 said:So No spacer needed in this offset. Just test fitted
Rear Just clears using Face II #B +37
Damn I have to paint the disc and caliper
This is the 19x9.5 inch in the box
Front Clears caliper fine with 7.5 Face 1 #B +43
TitaniumVtec said:I kind of like them also.
James,
It's great to see you back on the road my friend. Your car's looking beautiful, as did your last! Best to you and the family.
I'm looking into purchasing a pari for a stock 95 now that I can't get the AV3's.
If I'm going with a 17x8 front and 18x10 rear, waht offset do I need to make sure no spacers are required? Sorry I know nothing about this.
Ed
If I'm going with a 17x8 front and 18x10 rear, waht offset do I need to make sure no spacers are required? Sorry I know nothing about this.
Ed
I ended up buying Work VS-KF's. They haven't arrived yet (the typical 6-8 weeks) so I can't tell you.
Ed
Ed
For those that like the GT-C, but don't yet have them, and are thinking of getting them, check out my great prices on this wheel.
http://www.racingparaphenalia.com/GTCpage.html
http://www.racingparaphenalia.com/GTCpage.html
Im hoping that my GTCs from my S2000 will fit.
ALL are Face 1 18s.
Fronts are 7.5 inch with 50 offset and rears are 9 inches with 55 offset (milled from 50).
It is for a 02. By my calcs I should be OK in the rear, but front may extend a little too far out (11mm?). The rear seems fine with just 1mm farther out.
Of course the rear rubber will have to be changed to avoid TCS problems.
Will the Face 1 clear my 02 callipers?
Car is away for winter so I cant just test it out!
ALL are Face 1 18s.
Fronts are 7.5 inch with 50 offset and rears are 9 inches with 55 offset (milled from 50).
It is for a 02. By my calcs I should be OK in the rear, but front may extend a little too far out (11mm?). The rear seems fine with just 1mm farther out.
Of course the rear rubber will have to be changed to avoid TCS problems.
Will the Face 1 clear my 02 callipers?
Car is away for winter so I cant just test it out!
Similar threads
