If I have an aftermarket alarm, I assume I can uninstall it and put everything back to oem, then install this? Have you seen any issues with doing this?
-
***AVOID MARKETPLACE SCAMS!!***
Scammers are using compromised Prime member accounts to pose as a trusted seller in the marketplace. They also also creating usernames similar to veteran Prime names to trick you (e.g. DrManny3 vs DrManny1). Before you enter into a deal with ANY seller, follow these tips to keep yourself safe. If you encounter one of these scammers, please report them immediately and we will lock their account.
Caveat Emptor!
FS: Keyless Entry System (New)
- Thread starter I_M_Legend
- Start date
Yes you can remove but it's not absolutely necessary. Most folks remove bc they don't want extra stuff there. No issues I'm aware of however I would caution that most aftermarket alarms require cutting of the ignition wires for starter disrupt. That will either need to be reconnected or the relay used left in place.
yes. check PM
still available
PM if interested. Beware of scammers reaching out! Check the username and avatar.
Glad you like it!
For the trunk release, someone on ESTY sells this cable that leverages the CD changer cable to run wires to the trunk. It can make adding a reverse camera much easier along with trunk release wire.
I have a 2005 NSX that already has keyless.
I don't like the look of the FOB
I want light flash on lock / unlock
and I want to be able to remotely unlock the trunk
Will your system work with my setup and allow for those additions?
I don't like the look of the FOB
I want light flash on lock / unlock
and I want to be able to remotely unlock the trunk
Will your system work with my setup and allow for those additions?
Unfortunately my keyless system has not been tested on 04-05. I'm pretty sure it's not compatible as the 04-05 has siren.
sent you a PM. beware of scammers sending messages with a similar username to mine.
Similar threads
