• ***AVOID MARKETPLACE SCAMS!!***

    Scammers are using compromised Prime member accounts to pose as a trusted seller in the marketplace. They also also creating usernames similar to veteran Prime names to trick you (e.g. DrManny3 vs DrManny1). Before you enter into a deal with ANY seller, follow these tips to keep yourself safe. If you encounter one of these scammers, please report them immediately and we will lock their account.

    Caveat Emptor!

FS: Keyless Entry System (New)

I_M_Legend said:
All USDM models have a factory security system which is armed and disarmed with the key. The Keyless Entry System was a dealer installed option.

Here's the installation instructions for your 98. The basic install is fairly standard.

Here's an install video:

Click to expand...
Payment sent, excited to get it and install. Thanks for the video.
 
laserbimmer said:
Hi, tried to send you DM, but it keeps saying "something went wrong". If the keyless entry system is still available, I will take it. Thanks.
Click to expand...

Forum has been strange lately. I can't seem to PM you either.

Text me at 408 nine zero five 6558
 
I purchased this kit a few years ago and recently installed it. It works great and I'm very happy with it! I did the optional wiring to make the trunk open and the parking lights flash. I was wondering, would it be possible to make the turn signals flash instead of the parking lights and if so, which wire would I need to tap into?
 
If I have an aftermarket alarm, I assume I can uninstall it and put everything back to oem, then install this? Have you seen any issues with doing this?
 
DPG said:
If I have an aftermarket alarm, I assume I can uninstall it and put everything back to oem, then install this? Have you seen any issues with doing this?
Click to expand...

Yes you can remove but it's not absolutely necessary. Most folks remove bc they don't want extra stuff there. No issues I'm aware of however I would caution that most aftermarket alarms require cutting of the ignition wires for starter disrupt. That will either need to be reconnected or the relay used left in place.
 
A late thanks for your product there, and for your assistance with getting it installed. The power trunk stuff was too much effort for me though, but hey, remote lock/unlock with flash works (broke/crushed then lost my original FOB).
 
Lamini said:
A late thanks for your product there, and for your assistance with getting it installed. The power trunk stuff was too much effort for me though, but hey, remote lock/unlock with flash works (broke/crushed then lost my original FOB).
Click to expand...

Glad you like it!

For the trunk release, someone on ESTY sells this cable that leverages the CD changer cable to run wires to the trunk. It can make adding a reverse camera much easier along with trunk release wire.

 
I have a 2005 NSX that already has keyless.

I don't like the look of the FOB
I want light flash on lock / unlock
and I want to be able to remotely unlock the trunk

Will your system work with my setup and allow for those additions?
 
Madhatter10-6 said:
I have a 2005 NSX that already has keyless.

I don't like the look of the FOB
I want light flash on lock / unlock
and I want to be able to remotely unlock the trunk

Will your system work with my setup and allow for those additions?
Click to expand...

Unfortunately my keyless system has not been tested on 04-05. I'm pretty sure it's not compatible as the 04-05 has siren.
 


Write your reply...

Similar threads

I_M_Legend
FS: Add On Tilt Sensor for factory security system
Replies
11
Views
800
I_M_Legend
I_M_Legend
B
Keyless Entry Remote
Replies
7
Views
334
Browzer
B
J
FS: Coverking Autobody Armor Outdoor Car Cover- thick, plush protection
Replies
2
Views
190
JRitt
J
clarknm
Alarm wiring
Replies
2
Views
182
clarknm
clarknm
NYCNSX
FS: OEM keyless entry system
Replies
1
Views
512
Chase_acura
Chase_acura
Back
Top