• ***AVOID MARKETPLACE SCAMS!!***

    Scammers are using compromised Prime member accounts to pose as a trusted seller in the marketplace. Before you enter into a deal with any seller, follow these tips to keep yourself safe. If you encounter one of these scammers, please report them immediately and we will lock their account.

    Caveat Emptor!

2002+ CF rear diffuser.

"Your new friend might have to send out more refund checks soon":biggrin:

hahahhahaha, nice fortune. We came on nsx prime to bring people great products at a reasonable price, and with $260 on the market, i think we are going to have to go quite a bit lower to be competitive on this product.

Would anyone be interested in paying less than $260 for this item?

By the way, to anyone that thinks we are just trying to undercut an old vender here. Our main purpose as stated before is to bring you a great product at a reasonable rate, the previous rates were not reasonable so we stepped in. We just got our foot in the door now, and we are looking to build a relationship with the customer of prime. As you can see with our floor mats our prices are unbeatable, we will soon make the price on our diffuser unbeatable!
 
To be honest, the product could $100 and I wouldn't buy it purely because it won't work on my pre 02. Other wise, I'd be willing to pay Erick's CLEARANCE price and a bit more.

Just being honest....

So what other goodies do you have in store..... I know you've got SOMETHING brewing...... I'm just anxious to see what the prices you'll offer on the rest of your goodies so I can just order something I've been wanting.
 
To be honest, the product could $100 and I wouldn't buy it purely because it won't work on my pre 02. Other wise, I'd be willing to pay Erick's CLEARANCE price and a bit more.

Just being honest....

So what other goodies do you have in store..... I know you've got SOMETHING brewing...... I'm just anxious to see what the prices you'll offer on the rest of your goodies so I can just order something I've been wanting.

Let me know what you want. We cant come out with all the surprise at once.
 
WELL.....if erick is making money on $260 shipped! $200 shipped shouldnt be a problem! unless this vendor got BANNED!!!
i really hope that the seller is not banned yet!
keep up the competition! HE's SELLING FOR $260 SHIPPED, i think u should DO SOMETHING!!!:biggrin:

No, the $200 seller isn't banned. He's probably got more nsx stuff than any vendor here on prime I'm willing to bet. Like i said, it's not carbon fiber though and only available in one color since it's pre painted to match.

I'm gonna leave this one alone. I don't wanna sway from Synergy's purpose on this thread since I wanna pick up some cool shit from him still, lol. Hell of a deal for someone who can use it.
 
welcome!!!
they don't like u becasue they can feel the competition!
don't worry about them! just make some more nice parts at a better price!
they call u a "shady business men" when they are selling something for $700+ when the cost is LESS then $200! they just dont want u to share their profit!:biggrin:
again, the market is open! i want to see more parts for the NSX!
 
Current Projects

- AP1 NSX R Vented Carbon Fiber Hood
- NSX R Carbon Fiber Wing
- Side Vents Carbon Fiber

New Project

- AP1 MODE4 Diffuser Carbon Fiber:biggrin:
- NRG Seats Carbon Fiber with Seat Mounts:eek:

what else evof575gtc sells?:tongue:
 
add
- Red "H" Horn Button & Ring for MOMO/SParco Steering Wheels

lol.. i purchase those from him for $50.. lol
 
work at same place.

we are new to nsxprime so we are trying very very hard to be nice but .... his not making it very easy... :)

when i open my fortune cookie tonight, it read "Your new friend might have to send out more refund checks soon":biggrin:


Obviously you are NOT Erick's friend... It's sad to see people like you in this business.... You will not last long in this community!!!
 
hahahhahaha, nice fortune. We came on nsx prime to bring people great products at a reasonable price, and with $260 on the market, i think we are going to have to go quite a bit lower to be competitive on this product.

Would anyone be interested in paying less than $260 for this item?

By the way, to anyone that thinks we are just trying to undercut an old vender here. Our main purpose as stated before is to bring you a great product at a reasonable rate, the previous rates were not reasonable so we stepped in. We just got our foot in the door now, and we are looking to build a relationship with the customer of prime. As you can see with our floor mats our prices are unbeatable, we will soon make the price on our diffuser unbeatable!

The great product you are selling here is resulted from countless hours of work by Mode4. They invested the money for bring out this product and now you are stabbing from the back of the people who help created this product. NRG in my opinion, crossed that fine line of being a honest vender to a vender who is out to get what ever they can.

It is very sad for me to see this. Regardless what you are saying, insiders here in S. Cal understand that since NRG is the source of this product, you probably don't have any other NSX product in the pipeline. The initial cost of casting a mold after spend top dollars for an JDM OEM product is never cheap. Therefore, you may well be a one shot wonder on this forum trying to pull a fast one.

The bottom line is that you may very well be the scapegoat for NRG to move the excess diffusers they produced without the permission of Mode4.

It is amazing what people will do to make a few dollars that will probably have absolutely no major impact in their financial life - At the expense of others.:confused: Now you have forced Mode4 to move their product at your price and cause them to loose their initial investment.

Not cool!!!

welcome!!!
they don't like u becasue they can feel the competition!
don't worry about them! just make some more nice parts at a better price!
they call u a "shady business men" when they are selling something for $700+ when the cost is LESS then $200! they just dont want u to share their profit!:biggrin:
again, the market is open! i want to see more parts for the NSX!




For those who doesn't understand the severity of this incident...

Long time ago in a city not too far away, I took on a job in a brass instrument factory. At that time, a well known company called French Besson contracted them to make their trumpet. By doing so, the French Besson company released THEIR design specs, and parts requirement to this particular factory. in fact, they even INVESTED money to the production line so this small factory can produce products to meet their quality standard.

The "professional line" French Besson trumpet had a retail price of around $1500. While I was working at the factory, I found out that the owner of the factory was selling those trumpets under the table for $400 cash, undercut the actual company who contracted him to make the trumpets.

Today, the French Besson company is not much of a player in the brass instrument business, and this particular manufacture got hold of the blue prints from French Besson, and slap their own labels on the French Besson design - and selling the same or slightly altered trumpets under their own label for as much as $4000 plus. While the consumer lost a great company that actually had a product that was competitive quality but cheaper than some other main stream brands, the "knock offs" are now costing even more than the original.

Lots of people sells NSX-R knock off parts, but if you look at the history of these venders, the cost is never cheap when they are the front runner. After all, you have to purchase the OEM part, find a company to produce the mold, and start with a minimum production number, while crossing your fingers hoping that you can at least cut even so you can move on to create another product (s). Unfortunately in this case, the manufacture pulled a fast one by pumping out more than what they have agreed with Mode4, and try to profit further from their agreement. There is an ethics issue here.

Of course there will always be people out there just want to buy the stuff cheap, which is our human nature. But it is sad to see some people bought into this guy's program and start naming the stuff they want, even though they have no clue who this guy is, and how he obtained some one's product without blink his eyes.


Sigh......
 
Last edited:
Current Projects

- AP1 NSX R Vented Carbon Fiber Hood
- NSX R Carbon Fiber Wing
- Side Vents Carbon Fiber

New Project

- AP1 MODE4 Diffuser Carbon Fiber:biggrin:
- NRG Seats Carbon Fiber with Seat Mounts:eek:

what else evof575gtc sells?:tongue:

First off, you gave evof575gtc a good trader rating, and now you start to bash his stuff or what he sells....and you quote "we are new to nsxprime so we are trying very very hard to be nice but .... his not making it very easy". I find that funny.

I don't know how it is on the civic forums, does this look familiar "xtremecivichb", or what tactics you use to sell, but all I can say is you are not really building relationships here dude. Might as well hold a match stick and light it up, because before you can even cross the bridge you already burning it. WE DON'T WANT YOU HERE MAN if you gonna sell like how you are selling.

Also...we like to buy stuff from knowledgeable vendors who actually have an NSX and know what they are selling. Maybe you might do better in the s2000 forums since the parts you are selling is more for s2000 "AP1".
 
Last edited:
Current Projects

- AP1 NSX R Vented Carbon Fiber Hood
- NSX R Carbon Fiber Wing
- Side Vents Carbon Fiber

New Project

- AP1 MODE4 Diffuser Carbon Fiber:biggrin:
- NRG Seats Carbon Fiber with Seat Mounts:eek:

what else evof575gtc sells?:tongue:

You might want to learn more about the car you're trying to sell parts for.. AP1? :rolleyes:
 
what else evof575gtc sells?:tongue:

I gather from the forum name you and SynergyAutoworks are basically affiliated.
If you're selling items. There is no need to pick fight with other vendors. I think you know you're not doing yourself any favors. Especially you yet to prove yourself, having 1 itrader rating don't count(even worst with SynergyAutoworks). And now you're picking a fight with a vendor with 100 itrader rating... all of them positive.
There are couple of terms usually used in my company which you might know... ethic and long term strategy(development plan). Which could be apply to this thread... or individual. :smile:
 
The great product you are selling here is resulted from countless hours of work by Mode4. They invested the money for bring out this product and now you are stabbing from the back of the people who help created this product. NRG in my opinion, crossed that fine line of being a honest vender to a vender who is out to get what ever they can.

It is very sad for me to see this. Regardless what you are saying, insiders here in S. Cal understand that since NRG is the source of this product, you probably don't have any other NSX product in the pipeline. The initial cost of casting a mold after spend top dollars for an JDM OEM product is never cheap. Therefore, you may well be a one shot wonder on this forum trying to pull a fast one.

You like everyone else on Ericks's side have not heard the whole, story or have not read what i posted. I will add the whole story later, and you will see how bad you were being taken advantage of. They did not invest any money, they simply purchased the product from NRG the same as we did. When NRG has to make a product they have a certain number they have to make in order to come out on top and make a profit for there buisness, i will call that number X, and when Mode4 purchased the product from NRG they only purchased 2/3 of X, now for the other 1/3 of the product it sat on the shelf for over a year, Erick and, and his partner were contacted many many times to come get the rest of the product, but they did not want to. NRG gave them over a year, finally the owner got tired of it and came to us.

When i first posted this product, Erick sent me a pm, an email, and he posted in the thread i created. I responded to his pm (2 times, his email, and to him in the thread. I sent him my personal phone number, and shop number so he could call me to resolve the matter, but he would not call me, he insisted on call NRG and crying that we were selling the product to low, he was asking NRG to make us raise the price of our product to $7xx But we belive over %500 mark up is to much.

As for having anything else in the pipeline, your wrong about that, we have more than anyone would know what to do with. I agree with you casting the mold is not cheap, but MODE 4 never had to pay any casting fees, not a single dollar for any of the production cost. They were just required to buy the entire product for a fixed amount, which they obviously didn't do. They do not have any more money invested in this product than we do.

Please explain how we are trying to pull a fast one, seems to me like he has been pulling a fast one you for years. And the vendor was more honost about this product than mode 4 was, Bad buisness from mode 4 caused the vendor to come to us.
 
I gather from the forum name you and SynergyAutoworks are basically affiliated.
If you're selling items. There is no need to pick fight with other vendors. I think you know you're not doing yourself any favors. Especially you yet to prove yourself, having 1 itrader rating don't count(even worst with SynergyAutoworks). And now you're picking a fight with a vendor with 100 itrader rating... all of them positive.
There are couple of terms usually used in my company which you might know... ethic and long term strategy(development plan). Which could be apply to this thread... or individual. :smile:

From the name synergyaw (aw=autoworks) I can tell you yes we are from the same place. We are not trying to pick a fight with anyone here, we are just trying to build a customer base, and establish ourself on this site, but it is old vendors that bully us, no wonder no new vendors come on this site, becuase they are just going to get harassed and bullied.
 
I'm saddened to see so much drama on NSX Prime as of lately. I'm shocked to see some of these posts, with so much hate and animosity. I think most of this discussion needs to be moved to another thread. I feel bad that Lud will probably have to chime in and clean up this mess.

And at the same time, I look forward to hearing the whole story....in another thread.

Also, for the record, I'm not taking anyones side. I'm glad to see new vendors taking interested in the NSX market, and I'm happy to support them, as well as the long time vendors that have proven themselves.

Happy Friday,
- Zishan
 
Last edited:
Also...we like to buy stuff from knowledgeable vendors who actually have an NSX and know what they are selling. Maybe you might do better in the s2000 forums since the parts you are selling is more for s2000 "AP1".

You might want to learn more about the car you're trying to sell parts for.. AP1? :rolleyes:

dude.. lol

sorry but look at the time.. i was tired..

:biggrin:

NA1.. better?

FYI. I do own a NSX and one of our shop race car is NSX (old Rob Morrison's).
 

Attachments

  • IMG_1037.JPG
    IMG_1037.JPG
    50.1 KB · Views: 102
Last edited:
You like everyone else on Ericks's side have not heard the whole, story or have not read what i posted. I will add the whole story later, and you will see how bad you were being taken advantage of. They did not invest any money, they simply purchased the product from NRG the same as we did. When NRG has to make a product they have a certain number they have to make in order to come out on top and make a profit for there buisness, i will call that number X, and when Mode4 purchased the product from NRG they only purchased 2/3 of X, now for the other 1/3 of the product it sat on the shelf for over a year, Erick and, and his partner were contacted many many times to come get the rest of the product, but they did not want to. NRG gave them over a year, finally the owner got tired of it and came to us.

When i first posted this product, Erick sent me a pm, an email, and he posted in the thread i created. I responded to his pm (2 times, his email, and to him in the thread. I sent him my personal phone number, and shop number so he could call me to resolve the matter, but he would not call me, he insisted on call NRG and crying that we were selling the product to low, he was asking NRG to make us raise the price of our product to $7XX But we belive over %500 mark up is to much.

As for having anything else in the pipeline, your wrong about that, we have more than anyone would know what to do with. I agree with you casting the mold is not cheap, but MODE 4 never had to pay any casting fees, not a single dollar for any of the production cost. They were just required to buy the entire product for a fixed amount, which they obviously didn't do. They do not have any more money invested in this product than we do.

Please explain how we are trying to pull a fast one, seems to me like he has been pulling a fast one you for years. And the vendor was more honost about this product than mode 4 was, Bad buisness from mode 4 caused the vendor to come to us.

very interesting read.
thanks for posting and letting consumers do their best to make and informed buying decision.

So are the statements in this post not accurate about them having $$ invested in the production and purchase of OEM part, etc?

http://www.nsxprime.com/forums/showpost.php?p=966184&postcount=1
 
It's true as far as I know. Synergy does deal with and own a S2k and an NSX. Plus his statements were made at close to 2 am. So a little grogginess does make people say interesting things.

As for being friends with Erick, not all of us actually know Erick as a person or had much dealings with him even on prime. So to many, he's Erick aka Evof575*** the Vendor. Not all of us get the opportunity to be a "friend" due to plain geographical barriers.
 
When i first posted this product, Erick sent me a pm, an email, and he posted in the thread i created. I responded to his pm (2 times, his email, and to him in the thread. I sent him my personal phone number, and shop number so he could call me to resolve the matter, but he would not call me, he insisted on call NRG and crying that we were selling the product to low, he was asking NRG to make us raise the price of our product to $7xx But we belive over %500 mark up is to much.

As for having anything else in the pipeline, your wrong about that, we have more than anyone would know what to do with. I agree with you casting the mold is not cheap, but MODE 4 never had to pay any casting fees, not a single dollar for any of the production cost. They were just required to buy the entire product for a fixed amount, which they obviously didn't do. They do not have any more money invested in this product than we do.

Thanks for summing it up. Erick is a great vendor and if some of you feel bad that he isn't making enough $$$, you can send him extra when you purchase it. Obviously he can let them go for $260...so if they were $700 before I can only imagine the profit.

People were upset with DownForce when they first came on the scene...were upset that they (DF) could undersell Procar. A couple years later and it seems everyone is still around doing fine. I think there's enough room for a few vendors...and it's nice to see someone not ass raping us just because we own an expensive car.

Just my $.02

(And I'm not buying this diffuser since I don't own an '02+)
 
We as a customer have the right to purchase from whom ever we wish. So for those who want to pay more for the same product can still choose to do so. No one's stopping you.

Give the guy a break. He's here trying to help us and help make products for our beloved car. Even if he charged $1000 for these items. Who says you have to buy it nor does that give anyone the right to bash him either.

Keep the products coming!
 
Thanks for summing it up. Erick is a great vendor and if some of you feel bad that he isn't making enough $$$, you can send him extra when you purchase it. Obviously he can let them go for $260...so if they were $700 before I can only imagine the profit.

People were upset with DownForce when they first came on the scene...were upset that they (DF) could undersell Procar. A couple years later and it seems everyone is still around doing fine. I think there's enough room for a few vendors...and it's nice to see someone not ass raping us just because we own an expensive car.
Just my $.02

(And I'm not buying this diffuser since I don't own an '02+)

u are totally right!
it seems that the "people" dont like Synergy are mostly Ericks friend!
as we can see once he lower the price to $260, his "FRIEND" were asking him to returns the $$$! this is all about $$$! if it was vanchu, or anyone on here that bought the diffuser for $700+ and now u know where to go and get ur $$$ back!
 
u are totally right!
it seems that the "people" dont like Synergy are mostly Ericks friend!
as we can see once he lower the price to $260, his "FRIEND" were asking him to returns the $$$! this is all about $$$! if it was vanchu, or anyone on here that bought the diffuser for $700+ and now u know where to go and get ur $$$ back!
vendor who ass raping us casue we own an expensive car has to be out of this community!:rolleyes:


No, this is Capitalism, not Socialism. Competition is good, it increases quality and lowers price. Vendors can charge whatever they want, no one is forcing to you buy them, and if the vendor's can't get enough to sold to make it their while, they will lower the price or not do it at all. Vendor's are business people, in it to make money and good for them that they have taken the time, effort, risk and investment for a bunch of cheap flake NSX guys (like me! :) )


As long as Vendor's are not blocked from selling good (for example, bribing Lud to not allow a vendor on the forum..) then this is all good!!

Just hope that the parts show up unlike that Tamoske guy, ya know :)
 
Back
Top