***AVOID MARKETPLACE SCAMS!!***

Scammers are using compromised Prime member accounts to pose as a trusted seller in the marketplace. They also also creating usernames similar to veteran Prime names to trick you (e.g. DrManny3 vs DrManny1). Before you enter into a deal with ANY seller, follow these tips to keep yourself safe. If you encounter one of these scammers, please report them immediately and we will lock their account.

Caveat Emptor!

Reply to thread

Message

First, get one of these:

[URL unfurl="true"]https://www.ebay.com/itm/356374639239[/URL]

Then, file two flats on the side of the socket so that you can get a crescent wrench on it.

Next, connect a long length of vinyl tubing to the nipple and exit the tube into a container

Slide the socket over the tube until you can place the socket on the bleeder.

VERY CAREFULLY loosen the bleeder slightly. The fluid is under something like 2,000psi pressure. You want to eek out the pressure, not release it all at once. As the pressure drops from the first blast, open the bleeder all the way and release the rest of the fluid into the container.

[QUOTE="Honcho, post: 2092641, member: 18194"] First, get one of these: [URL unfurl="true"]https://www.ebay.com/itm/356374639239[/URL] Then, file two flats on the side of the socket so that you can get a crescent wrench on it. Next, connect a long length of vinyl tubing to the nipple and exit the tube into a container Slide the socket over the tube until you can place the socket on the bleeder. VERY CAREFULLY loosen the bleeder slightly. The fluid is under something like 2,000psi pressure. You want to eek out the pressure, not release it all at once. As the pressure drops from the first blast, open the bleeder all the way and release the rest of the fluid into the container. [/QUOTE]

Verification