Chemical Engineer.
What do you do for a living? (just networking)
- Thread starter SUNEDAZ
- Start date
Professional Musician.
IT Manager for an optical lab.
Photographer as a side gig.
Photographer as a side gig.
shawn110975
Suspended
Computer Consultant since 1996
cars are my hobby
cars are my hobby
I own a small business, its a cellphone repair shop.
Software developer for 25 years, specialized in commercial lines insurance.
If you need someone to write an insurance policy administration system, I'm your man!
If you need someone to write an insurance policy administration system, I'm your man!
I am a board certified (in orthopedics) physical therapist. My clinic is in Pasadena.
On the side I invest in discounted mortgages.
On the side I invest in discounted mortgages.
Own Diamond Roofing Company:15 years. Operate in Dallas/Fort Worth and surrounding ares.....Commercial and Resedential roofing.......Specialize in Insurance recovery.......Office 817-654-7123.....Also own Timberidge Investments.....Realestate investments-rental properties:smile:
Certified Financial Planner and Registered Investment Advisor.
Ha! I'm a porn star comedian. (no "slash") As in, why did my condom fly? Because it was pissed off!
Hey Vegas, that's pretty good.
My comedy is more of the non-verbal type. When I get to the set and disrobe everybody laughs. I don't know what's so funny; but it seems to happen every time.
It's kind of like my short career as an exotic dancer. My first night it was apparent that I needed help. One of the veteran dancers took me aside and told me to put a potato in my shorts for the next set. I trusted him and took his advice. When I went out for my next set the entire audience started laughing so much that I couldn't finish the song. When I got backstage the dancer who had given me the advice said "You were supposed to put the potato down the front of your shorts".
I still don't know what was so funny.
Mechanical Engineering degree, pilot-in-training with the Air Force and going to fly either a C130 or something SpecOps (both?).
If you need some...uh...equipment, or anything really, I'm your dude.
If you need some...uh...equipment, or anything really, I'm your dude.
cinematographer, editor + educator in the international circuit of event film making.
its fun!
and yes i have an nsx film in mind when the schedule clears up.
<iframe src="http://player.vimeo.com/video/12014034?autoplay="0" width="398" height="224" frameborder="0"></iframe>
its fun!
and yes i have an nsx film in mind when the schedule clears up.
<iframe src="http://player.vimeo.com/video/12014034?autoplay="0" width="398" height="224" frameborder="0"></iframe>
Last edited:
I own an irrigation company...I make water shoot out of the ground.
Field Engineer for Bloom Energy. Transitioning to Field Quality Engineer.
Part 1 60 Mins Special
<iframe width="420" height="345" src="http://www.youtube.com/embed/xiozxOfCcr4" frameborder="0" allowfullscreen></iframe>
Part 2
<iframe width="420" height="345" src="http://www.youtube.com/embed/KaNGJul2FZ0" frameborder="0" allowfullscreen></iframe>
May need to turn this up on external speakers. Recent press conference.
<iframe width="560" height="345" src="http://www.youtube.com/embed/5RehT-Do9bs" frameborder="0" allowfullscreen></iframe>
Lot's of nay-sayers. but we have tons of systems out at customer sites and have contracts for many more. unfortunately i can't tell you which customers, but a couple are fortune 10 companies.
Part 1 60 Mins Special
<iframe width="420" height="345" src="http://www.youtube.com/embed/xiozxOfCcr4" frameborder="0" allowfullscreen></iframe>
Part 2
<iframe width="420" height="345" src="http://www.youtube.com/embed/KaNGJul2FZ0" frameborder="0" allowfullscreen></iframe>
May need to turn this up on external speakers. Recent press conference.
<iframe width="560" height="345" src="http://www.youtube.com/embed/5RehT-Do9bs" frameborder="0" allowfullscreen></iframe>
Lot's of nay-sayers. but we have tons of systems out at customer sites and have contracts for many more. unfortunately i can't tell you which customers, but a couple are fortune 10 companies.
Last edited:
Im a Structural Design Engineer for Northrop Grumman Aerospace Systems in San Diego. I design composite and machined parts for the MQ-4C GlobalHawk UAV for the NAVY...called the BAMS program. I use CATIA V5 and Pro/Engineer computer aided design software.
Prior to that I worked on the J2-X rocket engine at Pratt & Whitney Rocketdyne for the now cancelled ARIES program.
I have experience in the Commercial and Military Aircraft, Gas Turbine, and Rocket Engine industries. It pays to be diversified !!!
Prior to that I worked on the J2-X rocket engine at Pratt & Whitney Rocketdyne for the now cancelled ARIES program.
I have experience in the Commercial and Military Aircraft, Gas Turbine, and Rocket Engine industries. It pays to be diversified !!!
Last edited:
Is that you?
No, he's our CEO.
Ok. I do remember watching that. Very intresting.
Trophy husband.....at least that's what I tell my wife:biggrin:
I moonlight as a dual-rate supervisor at Harrah's San Diego.
I moonlight as a dual-rate supervisor at Harrah's San Diego.
Corporate finance supporting public sector contracts for one of the largest IT companies in the world.
Personal trainer and Certified Strength and Conditioning Specialist
