- Joined
- 21 July 2022
- Messages
- 55
what color is this door garnish
- Thread starter 67camaro91NSX
- Start date
Ivory
NH208L
NH208L
Last edited:
- Joined
- 21 July 2022
- Messages
- 55
HONDA OEM Side Garnish White R&L SET
84201-SL0-010ZD, 84251-SL0-010ZD NA1 NA2
Is this for the left-hand drive? I don't see it labeled on the website.
84201-SL0-010ZD, 84251-SL0-010ZD NA1 NA2
Is this for the left-hand drive? I don't see it labeled on the website.
The pictures look like RHD.
That "Sill Cover" part # is definitely RHD. See pic here:
www.amayama.com
You want 84251-SL0-A01, with whatever color code corresponds to Ivory. 84251-SL0-A01ZA is black; 84251-SL0-A01ZE is tan. 84251-SL0-A01ZD for Ivory? Dealers still have the Black & the Tan, but it looks like Ivory may be NLA. See item 8 here:
www.oemacuraparts.com
FWIW, the driver's side (LHD) in my '95 broke the same way; if I remember it correctly, it's riveted into weak plastic that also gets more brittle over time. If you have a look from the underside, it may be fairly easy to epoxy it back together like mine was. After mine was re-epoxied properly, it was ++ stronger than the original OEM part, and the repair is completely hidden.
Removing it intact it can be tricky. The plastic tab on the fuel release lever seems like it should have a clip to release it, but it just needs to be pulled a bit harder than you'd expect for a Honda. The Sill Cover then lifts off, but it's tricky do do without bending it and breaking the plastic cover off the pleather part. This thread, and the service manual page in it, may help.
Honda 84201-SL0-010ZD (84201SL0010ZD) COVER, PLASTIC
Honda 84201-SL0-010ZD (84201SL0010ZD) COVER, PLASTIC. New & genuine Japanese car parts. Fast shipping. Low prices. Request a quote from Amayama Trading Co. online.
www.amayama.com
You want 84251-SL0-A01, with whatever color code corresponds to Ivory. 84251-SL0-A01ZA is black; 84251-SL0-A01ZE is tan. 84251-SL0-A01ZD for Ivory? Dealers still have the Black & the Tan, but it looks like Ivory may be NLA. See item 8 here:
Interior Trim - Pillars for 2001 Acura NSX | OEMAcuraPart
www.oemacuraparts.com
FWIW, the driver's side (LHD) in my '95 broke the same way; if I remember it correctly, it's riveted into weak plastic that also gets more brittle over time. If you have a look from the underside, it may be fairly easy to epoxy it back together like mine was. After mine was re-epoxied properly, it was ++ stronger than the original OEM part, and the repair is completely hidden.
Removing it intact it can be tricky. The plastic tab on the fuel release lever seems like it should have a clip to release it, but it just needs to be pulled a bit harder than you'd expect for a Honda. The Sill Cover then lifts off, but it's tricky do do without bending it and breaking the plastic cover off the pleather part. This thread, and the service manual page in it, may help.
Last edited:
Try MITA.
Consider repairing item first with epoxy.
Then consider converting to black.
I eventually just replaced my entire interior to black including the dash. Ivory looks like heck when old, but amazing when new.
Consider repairing item first with epoxy.
Then consider converting to black.
I eventually just replaced my entire interior to black including the dash. Ivory looks like heck when old, but amazing when new.
True story!
