WANTED - NA1 Engine harness to chassis plugs

[Mothra]

I am looking for the 4 plugs (2 grey, 2 blue) that connect the engine harness to the chassis inside the cabin. I do NOT want to have to buy an entire harness. I have the female ends to I only need the male ends that are attached to the harness itself. I have attached a picture of the female ends that they plug into.

I have already done a very extensive search and contacted Science of Speed, Rywire, Wiring specialties, NSXShop (Now Mita Motorsports). Any help locating these would be greatly appreciated.

 

[NSX_n00b]

You may want to go down to your local pick and pull junk yard and tear apart some early 90's civics, accords, legends that you find there and see if any of those cars shared the same plugs, most Honda/Acura models used the same connectors in varying ways.

 

[drew]

I believe those can be salvaged from the Odyssey. When I converted my NA1 from AT to MT I made a "T-harness" to reroute wires as required in those harnesses. Pretty sure the Odyssey around the lower dash area at the fuse panel, cannot remember which year but mid 90s I think.

Those connector shells are made by Mitsumi and interchangeable with each other. The blue color would be difficult, but grey is easy enough.