Violet Alarm wire Clifford Cannot Find Connection, Sorry, the wire is Green, not Violet--Solved with I_M_Legend PNP Keyless Entry System

Joined
17 April 2024
Messages
36
Recently purchased 1992 seems to have a Clifford Matrix RSX3.5 alarm and XCRS Start module. When the unlock button on the Viper remote is pushed, a solenoid is clicking, but the doors do not unlock. Everything else seems to work.

When the covers under the steering wheel were removed, a violet wire was hanging loose, shown in the first attachment.

A Clifford wiring diagram (second attachment) found on the web indicates this is the door unlock wire.

I spent as much time as I could upside down under the steering wheel and could not find where to attach this wire, though I could clearly see where the other wires were attached, like the black wire attaching to a pink wire to the left on the first photo.

Anybody have any idea where or what color wire this violet wire attaches to? I realize it should not be this complicated, there is only a 6" radius of where the wire can go, but it has me stumped.

Thanks for any ideas.
 

Attachments

  • Violet Wire.jpg
    Violet Wire.jpg
    186.4 KB · Views: 13
  • NSX Clifford Alarm Wiring.jpg
    NSX Clifford Alarm Wiring.jpg
    121 KB · Views: 13
Goes to courtesy lights, the lights that come one even you open the for.

There should be a footwell lamp on the under dash cover.
 
Oh My Gosh, that explains why I cannot find the connection, I was not looking at that lamp because it is on the cover removed to get access to the wiring. I may have pulled the wire off when removing this cover, so reconnecting it may not solve my problems the way it seemed.

Will be away from the car for a few days, but will report back when I can get another look.

Many thanks!
 
The connector for the courtesy lamp should be split on the cover and the under the driver side dash. The connectors for the chime may be keyed alike but are color coded.

I don't believe the Clifford requires an input from the door lamps to request an unlock. Even if that were the case: the open door trigger/sense (violet) would read 0v (nothing) and request an unlock.

You'll need a test light or volt meter to safely continue your troubleshooting.

Use this link as a troubleshooting guide https://www.nsxprime.com/threads/91-92-keyless-solved.140311/

I_M_Legend and Drew (that's me) can help with replacing the Keyless Entry System if you want a PnP solution.
 
Last edited:
Best thing I did was pull out an old clifford alarm and replace it with @drew 's excellent system. I'm not sure what the best-before date is on those old Cliffords, but mine was long past reliable operation.

Are you LHD or RHD?
RHD - I think only @drew 's system would be plug and play?
LHD - @I_M_Legend has a system for sure, you'd have to ask @drew if he has a LHD version.

Both systems are similar, and a huge improvement over the crappy dealer add-on because they have a separate lock and unlock button so you're not wondering what you just did and if it's locked or not. (Acura remote: 1 lock/unlock button and no confirmatory light flash.) Also they flash the running lights to confirm lock/unlocking and also can pop the trunk! Acura clearly designed the trunk for remote access with the electronic trunk release, even that one stupid button in the middle of nowhere on the driver's door, but then oddly never offered a remote to make it work. Thanks to @drew and @I_M_Legend for rectifying it.

If you do switch, make a note of where the trunk pop wire connects off the clifford; you may be able to use that wire with @drew or @I_M_Legend system.
 
The KA5 Legend has the same trunk lock set up: same parts bin buttons and all.

There is a master trunk lock switch in the lockable glovebox that the valet key should NOT be able to unlock. And the valet key should not be able to be used in the keyed lock at the trunk either.

In theory, if you wish to keep your trunk contents safe from the valet: turn OFF the trunk switch in the glove box, lock the glove box with the standard key, and then only give the valet the designated valet key. In practice, the valet key seems to be no different than the general-use key, though a different key cut process may have been lost to time.

I suspect this was the purpose of the solenoid for the trunk lock opening. I don't think they had any bigger plans for the trunk lock. A Keyless Entry System in 1990 was big-league stuff as it was and a remote trunk lock release was just unimaginable back then.

The trunk wire is buried in a 20P connecter in the left-hand footwell. And this was the easiest location to tap into the trunk solenoid.
 
Last edited:
Can't wait to get back to the car and try some of this stuff out--it is all great information, thanks and will report back!
 
Found the following:

The courtesy light under the dash does have a wire going to it, but it is pink and looks like it was intended to go here because of the length and the wire guard.

NSX Alarm 5.jpg

I found a vacant connection way up under the dash, on a smaller gauge white/black wire (wire bundle can be seen in center of next picture), and I am not sure the violet wire goes here because the latter is a bit short in length for this position. If it does go there, it is no wonder that it got detached because there would have been a strain on the connection, which would not have held over time in a vibrating car. A Clifford legend found online lists the violet wire as "Driver side ground path input". Does this seem the right place to try?

NSX Alarm 6.jpg

Thanks again for any ideas!
 
MY APOLOGIES, I was rooting around some more and saw a clearly violet wire, this wire must be considered Green, though it has a lot of blue in the color. The only difference this makes is that Green is the positive side door switch, and Violet is the negative. Have not been able to find a connection point within reach of this wire, though. I have found green and violet wires that do seem connected in a bundle. The ones that are connected seem to be about 12 gauge wires, while the green one not connected is about 16 gauge.
 
This is starting to sound a bit tenuous. Connecting wires that you're not sure about has the potential to not just blow fuses, but fry electrical components. While toasting a Clifford Alarm wouldn't be a big deal, if you short something out that damages the NSX wiring or an OEM component, that could be a BIG commitment in time and/or $. Are you sure you're comfortable with this?
Here's a pic of about 1/3 of the wiring I found taking out my old Clifford. Does that help find the wire you're looking for?
PXL_20210906_182556462-min.jpg
 
Last edited:
Wild Turkey, you are correct, I am not wanting to make things worse and potentially fry chassis wires. This started out looking for a connection point that made sense to try, but I cannot find that. I have scheduled an appointment for a shop to look at the car, and if they cannot fix it, I will explore I_M_Legend's PNP system. I appreciate everyone's help with this and will let you know the resolution.

The wiring diagrams found indicate this smaller gauge green wire could be a lock signal wire.
 
Yes, get back on track to diagnosing the door un/lock issue. This is fumbling in the dark on the wrong side of the room

There are 2x violet wires. One of them is a trigger to activate the alarm when the system is armed.

I don't believe any of this is germane to the door un/lock issue.

You need to verify the condition of the OEM door-locking system. Then determine if the Clifford is sending out a request and if its getting to the OEM system. For this you need a test light multiimeter...costs a few dollars at Harbor Freight.

The Clifford seems to have integrated high current relays and the original install shop may have just butchered OEM wires and here we are. Or they interfaced with the door lock control unit. We don't know. The harness labeled 7-pin H3 is your start point.

The OEM Security Control Unit is very good and the Clifford is completely redundant and an additional unnecessary failure point.

IMO the Clifford should be removed and the vehicle returned to stock because it was superfluous on day one and likely just what the install shop knew what to do best. Though the normally open kill switch is fairly rare, might fetch decent money on eBay.

I recommend getting a PnP system. It will likely be the most expedient, cost-effective, and reliable system. Also easily reversed when it too becomes superseded in 30 years.

Make sure your new shop doesn't cut any stock wires and/or offer you a different system.
 
Last edited:
NSX Clifford Alarm Removal Picture.jpg

Many thanks to everyone who contributed to my understanding of this whole mess. My initial reason for wanting to troubleshoot the Clifford Alarm was a fear of removing it and damaging the car's wiring in the process. Ultimately, I found a number of cut wires, including the violet one and several others, which made the decision for me. Either it was sabotage or the unlock feature was blowing fuses, but it had to come out. Once begun, it kept going. The picture above shows the Clifford in the upper left, the Pioneer AVIC-D1 radio with satellite box and old Apple controller box upper right, K40 Radar Detector and Jammer lower left, and TPM250 aftermarket tire monitoring system lower right.

I spent hours identifying each wire before removing, and the result is that the car starts and the factory alarm system is intact. The most crucial wires seem to have been the immobilizer wire and the ignition wires that had to be rejoined. The only mystery wires left are a couple the K40 unit's twisted pairs going somewhere up into the dash.

One of I_M_Legend's PNP alarms will arrive tomorrow, and a Pioneer DMH-2660NEX will arrive Tuesday.

Thanks once again for all the help!

Will report back when all installed, might be a few weeks because I am slow in this summer heat.
 
A million thanks to Drew, Wild Turkey, I_M_Legend and all who helped me through this. I now have I_M_Legend's Plug and Play system installed and everything is working properly.

I fully agree with everyone who suggested this route--it is really great to have a system install so easily and work so perfectly, even though I am half color-blind and have trouble telling green from violet!

I cannot say enough about how much I recommend this system to others.

Thanks again!!!
 
I spent hours identifying each wire before removing, and the result is that the car starts and the factory alarm system is intact. The most crucial wires seem to have been the immobilizer wire and the ignition wires that had to be rejoined. The only mystery wires left are a couple the K40 unit's twisted pairs going somewhere up into the dash.

Thanks once again for all the help!

That looks a bit like my pile of wires after I also removed a failing Clifford, a radar detector, some sort of USA-1 Apple connector, something I never could identify, and a monstrous mirror with a compass, temp, and garage door opener (unbelievable how much wiring that needed.) My 01 had an extra FM antenna wired in parallel? I know what you mean that tracking one wire leads to another, and so on, but the last bit as you reach the end of it is so satisfying, once you test start the car... And now you don't have to wonder about that sketchy wiring if you're trying to diagnose something else later. (The leftover K40 pairs may be related to an ejection seat so be careful with those...:))

Forum hint @whh333 - when quoting/referencing other users, type the @ sign and the first few letters of their username and a menubox will pop for selection - they'll also be informed that you quoted them. Welcome again to Prime!
 
Back
Top