Hi everyone, this one is completed and I am ready to start a new project NSX, or possibly something with 6 more cylinders so our current shop car is for sale.
HIGH QUALITY PICS HERE:
http://www.nsxprime.com/forums/showthread.php?t=127585
Available as pictured in full Umbrella A.D. livery or we can remove all graphics and vinyl decals to expose flawless new paint below.
This vehicle has been built by my shop with absolutely no expense spared using only the best and finest parts and materials available, the attention to detail is unsurpassed, Fit and finish surpass oem levels of quality. The car is perfect in every way, absolutely no nicks, cracks or scratches on exterior, Brand new oem Acura front windshield and associated moldings/gaskets installed while the car was being painted. Interior is brand new as well.
More pics available upon request.
Umbrella Auto Design 1992 SGT NSX $99,000, no sweet mustang trades, no offers, no payment plans.
VIN JH4NA1159NT001249
Manual transmission
Clean Carfax, 2 owner, No accidents ever.
19,000 original miles
Build Details and mods:
BODY
1 of a kind Sorcery 2007 SGT widebody imported from Japan, only one in the USA
Carbon fiber front splitter
2005 NSX-R vented hood
2005 NSX headlights with oem hid lighting
Sorcery carbon fiber rear hatch
Sorcery SGT carbon fiber rear spoiler
Sorcery rear lower difussor
Sorcery DRY CF rear hatch
2005 NSX rear tail light set
Custom formed inner fender liners front and rear
Powder coated hexagon aluminum mesh in hood and fender ducts
PAINT
13 monthes to complete body work and custom composite fabrication, approx 3000 hours labor in body alone
BASF candy mandarin orange paint($20,000)(windshield out) 5 coats of clear, wetsanded and polished by hand, bodywork blocked out 3 separate times before paint, waiting a minimum of 1 month between repriming and re blocking to ensure a perfectly flat surface.
Full digitized 3m clear bra on front bumper, skirts,wheel arches,rear ducts, and rear spoiler.
Yellow film on headlights is removable.
WHEELS/TIRES
Advan RS 18x9 front
Advan RS 19x10 rear
Falken FK 452 front 225 35 18
Falken FK 452 rear 275 30 19
Brakes
Stoptech big brake kit front and rear with ST-40 calipers,13"rotors, and stainless steel braided lines
ENGINE(fresh rebuild by Comptech Machine) $30k in receipts for motor alone
Fresh service including new water pump, timing belt, accesory belts, spark plugs, all gaskets, rocker arm adjust etc.
Billet aluminum and carbon fiber trim
Full top and bottom end build by Comptech Machine
Forged JE pistons
Balanced and blueprinted
Titanium connecting rods
Ported heads
HI performance camshafts set (Comptech)
Adjustable cam gears (Comptech)
Hi flow oil pump gear (Comptech)
Titanium valve spring retainers (Comptech)
Hi lift valve springs (Comptech)
Balanced, knife edged crankshaft
Stainless headers (Comptech)
Carbon fiber Hi Flow induction box w/ uni filter- CT Engineering
Comptech stainless steel header set
RFY (gt design gt extreme)gt v1 exhaust
ARC titanium test pipe set
INCLUDES BRAND NEW SOS high boost 2.1 supercharger kit(not installed but present with car)
RC 750cc injectors
Aem Fic
TRANSMISSION
Custom built for race duty
Ported for external oil cooler
Comptech 4.55 ring and pinion set
Honda NSXR close ratio gear set
Comptech Power Grip 2 clutch/lightweight flywheel assy.
SUSPENSION
JIC FLT TAR coilovers
Umbrella Auto Design VRH lifter set( control ride height on the fly)
Can be seen here:
http://www.youtube.com/watch?v=ys6zCuSJIYQ
http://www.umbrellaautodesign.com/c...ide_height_suspension_kit_patent_pending.html
Comptech anti sway bar set (f&r)
DC billet aluminum/cf rear strut tower bar
INTERIOR
Full alcantara(synthetic suede) interior retrim by Umbrella auto Design
($12,000)
New carpet and mats
Status Racing Carbon Fiber race seats w/custom alcantara upholstery and memory foam padding
Custom modified seat mounting rails and sliders for ultra low mounting and extra head clearance
Status racing harnesses
Alpine IVA W205 head unit
Alpine TME M770BT moniter
Memphis audio speakers and amplifiers
10" subwoofer in passenger floor compartment, oem style, retains oem leg clearance
Interior plastics refinished with BMW M3 silver base and clear
Momo Champion steering wheel with custom cf and brown alcantara grips
NRG steering hub adapter and quick release assy.
Rear view camera w/moniter
Misc
New complete window regulators left and right door
Side window tracks removed and cleaned/regreased left and right door
New oem body door and window gaskets
Left and right drive axles freshly rebuilt/repacked with grease
New inner and outer cv boots installed on left and right drive axles
More pics available upon request
Thanks For looking:smile:
HIGH QUALITY PICS HERE:
http://www.nsxprime.com/forums/showthread.php?t=127585
Available as pictured in full Umbrella A.D. livery or we can remove all graphics and vinyl decals to expose flawless new paint below.
This vehicle has been built by my shop with absolutely no expense spared using only the best and finest parts and materials available, the attention to detail is unsurpassed, Fit and finish surpass oem levels of quality. The car is perfect in every way, absolutely no nicks, cracks or scratches on exterior, Brand new oem Acura front windshield and associated moldings/gaskets installed while the car was being painted. Interior is brand new as well.
More pics available upon request.
Umbrella Auto Design 1992 SGT NSX $99,000, no sweet mustang trades, no offers, no payment plans.
VIN JH4NA1159NT001249
Manual transmission
Clean Carfax, 2 owner, No accidents ever.
19,000 original miles
Build Details and mods:
BODY
1 of a kind Sorcery 2007 SGT widebody imported from Japan, only one in the USA
Carbon fiber front splitter
2005 NSX-R vented hood
2005 NSX headlights with oem hid lighting
Sorcery carbon fiber rear hatch
Sorcery SGT carbon fiber rear spoiler
Sorcery rear lower difussor
Sorcery DRY CF rear hatch
2005 NSX rear tail light set
Custom formed inner fender liners front and rear
Powder coated hexagon aluminum mesh in hood and fender ducts
PAINT
13 monthes to complete body work and custom composite fabrication, approx 3000 hours labor in body alone
BASF candy mandarin orange paint($20,000)(windshield out) 5 coats of clear, wetsanded and polished by hand, bodywork blocked out 3 separate times before paint, waiting a minimum of 1 month between repriming and re blocking to ensure a perfectly flat surface.
Full digitized 3m clear bra on front bumper, skirts,wheel arches,rear ducts, and rear spoiler.
Yellow film on headlights is removable.
WHEELS/TIRES
Advan RS 18x9 front
Advan RS 19x10 rear
Falken FK 452 front 225 35 18
Falken FK 452 rear 275 30 19
Brakes
Stoptech big brake kit front and rear with ST-40 calipers,13"rotors, and stainless steel braided lines
ENGINE(fresh rebuild by Comptech Machine) $30k in receipts for motor alone
Fresh service including new water pump, timing belt, accesory belts, spark plugs, all gaskets, rocker arm adjust etc.
Billet aluminum and carbon fiber trim
Full top and bottom end build by Comptech Machine
Forged JE pistons
Balanced and blueprinted
Titanium connecting rods
Ported heads
HI performance camshafts set (Comptech)
Adjustable cam gears (Comptech)
Hi flow oil pump gear (Comptech)
Titanium valve spring retainers (Comptech)
Hi lift valve springs (Comptech)
Balanced, knife edged crankshaft
Stainless headers (Comptech)
Carbon fiber Hi Flow induction box w/ uni filter- CT Engineering
Comptech stainless steel header set
RFY (gt design gt extreme)gt v1 exhaust
ARC titanium test pipe set
INCLUDES BRAND NEW SOS high boost 2.1 supercharger kit(not installed but present with car)
RC 750cc injectors
Aem Fic
TRANSMISSION
Custom built for race duty
Ported for external oil cooler
Comptech 4.55 ring and pinion set
Honda NSXR close ratio gear set
Comptech Power Grip 2 clutch/lightweight flywheel assy.
SUSPENSION
JIC FLT TAR coilovers
Umbrella Auto Design VRH lifter set( control ride height on the fly)
Can be seen here:
http://www.youtube.com/watch?v=ys6zCuSJIYQ
http://www.umbrellaautodesign.com/c...ide_height_suspension_kit_patent_pending.html
Comptech anti sway bar set (f&r)
DC billet aluminum/cf rear strut tower bar
INTERIOR
Full alcantara(synthetic suede) interior retrim by Umbrella auto Design
($12,000)
New carpet and mats
Status Racing Carbon Fiber race seats w/custom alcantara upholstery and memory foam padding
Custom modified seat mounting rails and sliders for ultra low mounting and extra head clearance
Status racing harnesses
Alpine IVA W205 head unit
Alpine TME M770BT moniter
Memphis audio speakers and amplifiers
10" subwoofer in passenger floor compartment, oem style, retains oem leg clearance
Interior plastics refinished with BMW M3 silver base and clear
Momo Champion steering wheel with custom cf and brown alcantara grips
NRG steering hub adapter and quick release assy.
Rear view camera w/moniter
Misc
New complete window regulators left and right door
Side window tracks removed and cleaned/regreased left and right door
New oem body door and window gaskets
Left and right drive axles freshly rebuilt/repacked with grease
New inner and outer cv boots installed on left and right drive axles
More pics available upon request
Thanks For looking:smile:
Attachments
Last edited:
