turn signal lens cover

[Mynsxjoy]

My driver side signal lens is discolored. Dose any one know how to remove this and know the cost of a replacement.

 

[Doc308]

There is a Phillips head screw which holds it in place . It screws vertically into the bottom of the unit and can be accessed through the grill opening. Once it is loosened, the light unit swings outward. I've never done it, but looked it up in the service manual. You can access the section ( 23--187), with pic and instruction on the online service manual.

 

[DRIFTER]

I had mine out the other day to remove the yellow lens on the inside of the light housing, all u need is a long Philips screwdriver and the light should come right out. The hole is just under the light in the vent.

Also I used some rubbing compound to polish them up. Depending on how bad they are, there are some plastic cleaners/polish out there that u could try before replacing the light. Good Luck:biggrin:

 

[djdrock]

I had mine out the other day to remove the yellow lens on the inside of the light housing, all u need is a long Philips screwdriver and the light should come right out. The hole is just under the light in the vent.

Do you mean the orange/yellow U-shaped lens inside the turnsignal?

 

[MJK]

As mentioned, plastic polish will take that right out. Try meguires PlastiX