hey guys,
Hopefully some of you can help to trouble shoot for me.
After i install my 6 spds tranny, from tiem to time, my clutch was slipping. this afternoon, it was so bad that I can not even go uphill at all.. and I can not gas too hard, because if I do, the clutch would only slip
After, the tech fixed it, he told me that he adjusted the “master cylinder” .. I am not sure if that is what he means. I thought master cylinders are for the brake.. oh well..
Basically, that is the thing to adjust clutch engagement point ..
Tonite, I downshift to 3rd gear on the freeway, all of a sudden the clutch pedal got stuck all the way down to the floor… I had to drive in 3rd gear until I pull off from the freeway.
While I am driving it, I can hear the metal clicking (or banging something) sound.. as if I was dragging a metal pipe under my car.
So I parked my car, and I noticed (1) my pedal is all the way down to the floor. When I lift it up, it will stay all the way up, and when I press it again, it will drop all the way down to the floor (without any resistance)
(2). I don’t see any metal (or metal pipe) hanging under my car.. not sure where that noise is coming from (3), I see about ½ qtr of clutch fluid (brake fluid) dripping underneath the car (from the tranny)
what do you guys think the problem might be? I understand this is hard to diagnose the problem this way.. sorry,, any idea will help
thanks
-jjc.
