Does anyone have any recommendations for setting a tein coil over suspension for street use and track use?
Tein RA 10lb front springs and 9lb rear springs
Thanks
-Igor
Tein RA 10lb front springs and 9lb rear springs
Thanks
-Igor
Tein RA setting
- Thread starter Like007
- Start date
what do you mean exactly?
Do you mean you want it the handle good on the track and be comfortable? I run my 10kg front, 10kg rear RA at 8 clicks from full hard... I havn't done too much fine tuning at the track, but I get respectable laptimes considering it is primarily a street car. I also use Bridgestone S03s, Dali street/track anti-sway bar set full stiff up front and full soft in the rear. The alignment is closer to the 91-93 setup. I also have weight reduction to about 2850lb.
You can let me drive your car on the track and give you my opinion if you wish.
I also have Type-R front braces.
Do you mean you want it the handle good on the track and be comfortable? I run my 10kg front, 10kg rear RA at 8 clicks from full hard... I havn't done too much fine tuning at the track, but I get respectable laptimes considering it is primarily a street car. I also use Bridgestone S03s, Dali street/track anti-sway bar set full stiff up front and full soft in the rear. The alignment is closer to the 91-93 setup. I also have weight reduction to about 2850lb.
You can let me drive your car on the track and give you my opinion if you wish.
I also have Type-R front braces.
From the original setting I went for 8 clicks counter for the front and 10 clicks counter for the rear. My road is terrible so I set it to be more softer for comfort.
Similar threads
